Schneider Electric RXG21B7PV, EAN: 3606489562861

Schneider Electric RXG21B7PV relay 24VAC with varistor

Industrial Material > Industrial relays and contactors > Industrial Relays

Schneider Electric RXG21B7PV relay 24VAC with varistor

Lieske Part No. 1861897
Mfg Part No RXG21B7PV
EAN-Code 3606489562861
Manufacturer Schneider Electric
Here only 708,23 EUR
842,79 EUR incl. VAT

Further information for Schneider Electric RXG21B7PV relay 24VAC with varistor

Complementary
status LEDWithout
Electrical durability100000 cycles for NO resistive load at 55 °C; 100000 cycles for NC resistive load at 55 °C
[Ui] rated insulation voltage250 V conforming to IEC
Removable legendWith
Maximum switching voltage250 V
Drop-out voltage threshold>= 0.3 Uc AC
[Ie] rated operational current10 A at 30 V (DC) conforming to UL; 10 A at 30 V (DC) conforming to IEC; 10 A at 250 V (AC) conforming to UL; 10 A at 250 V (AC) conforming to IEC
Load current5 A
Minimum switching capacity50 mW at 10 mA, 5 V DC
Maximum switching capacity1250 VA AC; 150 W DC
Control typeLockable test button
Average resistance260 Ohm at 23 °C +/- 10 %
Contact resistance100 mOhm
Insulation resistance1000 MOhm at 500 V DC
Electrical insulation classClass F
Mechanical durability10000000 cycles
Safety reliability dataB10d = 100000
Utilisation coefficient20 %
Operating time20 ms
Reset time20 ms
Contact terminal arrangementSeparate
Connections - terminalsConnector, 1 x 0.25...1 x 2.5 mm² (22 AWG...14 AWG) flexible with cable end; Connector, 2 x 0.25...2 x 1 mm² (22 AWG...17 AWG) flexible with cable end; Connector, 1 x 0.5...1 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Connector, 2 x 0.5...2 x 1.5 mm² (20 AWG...16 AWG) solid without cable end
Dielectric strength1000 V AC between contacts with micro disconnection; 1300 V between terminals and base with basic insulation; 3000 V between terminals and LTB area with basic insulation; 3000 V AC between poles with basic insulation; 5000 V AC between coil and contact with reinforced insulation
[Uimp] rated impulse withstand voltage1200 V AC between contacts with micro disconnection; 6000 V between coil and contact with reinforced insulation; 1500 V between terminals and case with basic insulation
Overvoltage categoryIII
Protection categoryRT I
Pollution degree2
Test levelsLevel A group mounting
Device presentationComplete product
Contacts materialSilver alloy (AgSnO2In2O3)
Shape of pinFlat (faston type)
Net weight0.065 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 61810-1; CSA C22.2 No 14; UL 508; IEC 61984
Product certificationsEAC; CSA; UL; CE; DNV
Ambient air temperature for storage-40…85 °C
Ambient air temperature for operation-40…70 °C
IP degree of protectionIP20
Relative humidity10…85 %
Vibration resistance3 gn, amplitude = +/- 1.5 mm (f = 10…150 Hz)in operation; 5 gn, amplitude = +/- 1.5 mm (f = 10…150 Hz)not in operation
Logistical informations
Country of originCN
Main
Range of productHarmony Electromechanical Relays
Series nameRXG series
Product or component typePre-assembled plug-in relay with socket
Relay typeInterface relay
Contacts type and composition2 C/O
[Uc] control circuit voltage24 V AC
[Ithe] conventional enclosed thermal current5 A
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height7.960 cm
Package 1 Width1.560 cm
Package 1 Length7.200 cm
Package 1 Weight67.000 g
Unit Type of Package 2BB1
Number of Units in Package 230
Package 2 Height9.000 cm
Package 2 Width17.500 cm
Package 2 Length27.200 cm
Package 2 Weight2.124 kg
Unit Type of Package 3S03
Number of Units in Package 3180
Package 3 Height30 cm
Package 3 Width30 cm
Package 3 Length40 cm
Package 3 Weight13.309 kg
This plug-in relay with interface belongs to the range of Schneider Electric Harmony electromechanical relays. This is a pre-assembled relay mounted on a separate contact base with integrated terminal and a varistor protection module. This is a 5A, 24Vac, 2 CO interface mechanical relay. This pre-assembled relay is a ready-to-use package that saves assembly time. The relay offers a single-stage lockable test button. The interface relays are connected via screw terminals. This pre-assembled relay weighs 0.067 kg. Its design is suitable for industrial machinery, packaging, textiles, HVAC, automation panels, low/medium voltage switchgear, as well as motor controls, PLC interfaces, power supplies, building or medical equipment, lighting controls. It is a premium green product and complies with international standards and certifications such as IEC, UL, EAC, CSA, ROHS and REACH. It is sold in lots of 30 pieces. The RXG plug-in relays are a series of industrial plug-in relays designed for both simple and complex automation systems and are available with 1 changeover contact (10A) and 2 changeover contacts (5A).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1861897
qrcode für Schneider Electric RXG21B7PV relay 24VAC with varistor