| Complementary |
| status LED | Without |
| Electrical durability | 100000 cycles for NO resistive load at 55 °C; 100000 cycles for NC resistive load at 55 °C |
| [Ui] rated insulation voltage | 250 V conforming to IEC; 300 V conforming to CSA; 300 V conforming to UL |
| Removable legend | Without |
| Maximum switching voltage | 250 V AC; 30 V DC |
| Drop-out voltage threshold | >= 0.1 Uc DC |
| [Ie] rated operational current | 10 A at 30 V (DC) conforming to UL; 10 A at 30 V (DC) conforming to IEC; 10 A at 250 V (AC) conforming to UL; 10 A at 250 V (AC) conforming to IEC |
| Load current | 10 A at 250 V AC |
| Minimum switching capacity | 500 mW at 100 mA, 5 V DC |
| Maximum switching capacity | 2500 VA |
| Control type | Without lockable test button |
| Average resistance | 1100 Ohm at 23 °C +/- 10 % |
| Contact resistance | 100 mOhm |
| Insulation resistance | 1000 MOhm at 500 V DC |
| Electrical insulation class | Class F |
| Mechanical durability | 10000000 cycles |
| Safety reliability data | B10d = 100000 |
| Utilisation coefficient | 20 % |
| Operating time | 20 ms |
| Reset time | 20 ms |
| Dielectric strength | 1000 V AC between contacts with micro disconnection; 5000 V AC between coil and contact with reinforced insulation |
| [Uimp] rated impulse withstand voltage | 1200 V AC between contacts with micro disconnection; 6000 V between coil and contact with reinforced insulation; 1500 V between terminals and case with basic insulation |
| Overvoltage category | III |
| Protection category | RT I |
| Pollution degree | 2 |
| Test levels | Level A group mounting |
| Device presentation | Complete product |
| Contacts material | Silver alloy (AgSnO2In2O3) |
| Shape of pin | Flat (faston type) |
| Net weight | 0.018 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 61810-1; CSA C22.2 No 14; UL 508 |
| Product certifications | CSA; CE; EAC; UL; DNV |
| Ambient air temperature for storage | -40…85 °C |
| Ambient air temperature for operation | -40…70 °C |
| IP degree of protection | IP40 |
| Relative humidity | 10…85 % |
| Vibration resistance | 3 gn, amplitude = +/- 0.75 mm (f = 10…150 Hz)in operation; 5 gn, amplitude = +/- 0.75 mm (f = 10…150 Hz)not in operation |
| Logistical informations |
| Country of origin | CN |
| Main |
| Range of product | Harmony Electromechanical Relays |
| Series name | RXG series |
| Product or component type | Plug-in relay |
| Relay type | Interface relay |
| Contacts type and composition | 1 C/O |
| [Uc] control circuit voltage | 230 V DC |
| [Ithe] conventional enclosed thermal current | 10 A at -40…55 °C |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 3.500 cm |
| Package 1 Width | 1.300 cm |
| Package 1 Length | 3.000 cm |
| Package 1 Weight | 19.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 10 |
| Package 2 Height | 3.500 cm |
| Package 2 Width | 7.400 cm |
| Package 2 Length | 8.100 cm |
| Package 2 Weight | 207.000 g |
| Unit Type of Package 3 | S01 |
| Number of Units in Package 3 | 240 |
| Package 3 Height | 15 cm |
| Package 3 Width | 15 cm |
| Package 3 Length | 40 cm |
| Package 3 Weight | 5.221 kg |
Harmony Relay. Interface relay RXG as a component. Number of contacts 1, relay changeover design, contact load capacity 10 A. Coil control voltage 24 VDC. Mechanical position indicator no, LED indicator no. Test button for testing the contacts no, test lever for permanent switching for test purposes no. Transparent housing with a view of the contact without displays and test functions. Connections stable flat pins. Installation in a separate plug-in base.