| Complementary |
| status LED | With |
| Electrical durability | 100000 cycles for NO resistive load at 55 °C; 100000 cycles for NC resistive load at 55 °C |
| [Ui] rated insulation voltage | 250 V conforming to IEC |
| Removable legend | With |
| Maximum switching voltage | 250 V |
| Drop-out voltage threshold | >= 0.3 Uc AC |
| [Ie] rated operational current | 10 A at 30 V (DC) conforming to UL; 10 A at 30 V (DC) conforming to IEC; 10 A at 250 V (AC) conforming to UL; 10 A at 250 V (AC) conforming to IEC |
| Load current | 10 A |
| Minimum switching capacity | 500 mW at 100 mA, 5 V DC |
| Maximum switching capacity | 2500 VA AC; 300 W DC |
| Control type | Lockable test button |
| Average resistance | 260 Ohm at 23 °C +/- 10 % |
| Contact resistance | 100 mOhm |
| Insulation resistance | 1000 MOhm at 500 V DC |
| Electrical insulation class | Class F |
| Mechanical durability | 10000000 cycles |
| Safety reliability data | B10d = 100000 |
| Utilisation coefficient | 20 % |
| Operating time | 20 ms |
| Reset time | 20 ms |
| Contact terminal arrangement | Separate |
| Connections - terminals | Connector, 1 x 0.25...1 x 2.5 mm² (22 AWG...14 AWG) flexible with cable end; Connector, 2 x 0.25...2 x 1 mm² (22 AWG...17 AWG) flexible with cable end; Connector, 1 x 0.5...1 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Connector, 2 x 0.5...2 x 1.5 mm² (20 AWG...16 AWG) solid without cable end |
| Dielectric strength | 1000 V AC between contacts with micro disconnection; 1300 V between terminals and base with basic insulation; 3000 V between terminals and LTB area with basic insulation; 5000 V AC between coil and contact with reinforced insulation |
| [Uimp] rated impulse withstand voltage | 1200 V AC between contacts with micro disconnection; 6000 V between coil and contact with reinforced insulation; 1500 V between terminals and case with basic insulation |
| Overvoltage category | III |
| Protection category | RT I |
| Pollution degree | 2 |
| Test levels | Level A group mounting |
| Device presentation | Complete product |
| Contacts material | Silver alloy (AgSnO2In2O3) |
| Shape of pin | Flat (faston type) |
| Net weight | 0.058 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 61810-1; CSA C22.2 No 14; UL 508; IEC 61984 |
| Product certifications | EAC; CSA; UL; CE; DNV |
| Ambient air temperature for storage | -40…85 °C |
| Ambient air temperature for operation | -40…70 °C |
| IP degree of protection | IP20 |
| Relative humidity | 10…85 % |
| Vibration resistance | 3 gn, amplitude = +/- 1.5 mm (f = 10…150 Hz)in operation; 5 gn, amplitude = +/- 1.5 mm (f = 10…150 Hz)not in operation |
| Logistical informations |
| Country of origin | CN |
| Main |
| Range of product | Harmony Electromechanical Relays |
| Series name | RXG series |
| Product or component type | Pre-assembled plug-in relay with socket |
| Relay type | Interface relay |
| Contacts type and composition | 1 C/O |
| [Uc] control circuit voltage | 24 V AC |
| [Ithe] conventional enclosed thermal current | 10 A |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 7.960 cm |
| Package 1 Width | 1.560 cm |
| Package 1 Length | 7.200 cm |
| Package 1 Weight | 59.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 30 |
| Package 2 Height | 9.000 cm |
| Package 2 Width | 17.100 cm |
| Package 2 Length | 27.200 cm |
| Package 2 Weight | 1.931 kg |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 180 |
| Package 3 Height | 30 cm |
| Package 3 Width | 30 cm |
| Package 3 Length | 40 cm |
| Package 3 Weight | 12.150 kg |
Harmony Relay. Pre-assembled and ready-to-use interface relay RXG consisting of relay, base, protection module, retaining bracket and label. Number of contacts - 1, design - relay changeover contact, contact load capacity - 10 A. Coil control voltage - 24 VAC. Mechanical position indicator - yes, LED display - yes. Test button for testing the contacts - yes, test lever for permanent switching for test purposes - yes, operation - tool-free. Plug-in base with screw terminals in separate arrangement for mounting on top hat rail or screwable onto mounting plate. Protection module - varistor. Plastic retaining bracket for fixing and easy removal of the relay. Label for identification. All components are assembled and ready for use and the pre-assembled relay can be used immediately.