Schneider Electric RSB2A080P7PV, EAN: 3606489562793

Schneider Electric RSB2A080P7PV relay 2 We 8 A 230 V AC with varistor

Industrial Material > Industrial relays and contactors > Industrial Relays

Schneider Electric RSB2A080P7PV relay 2 We 8 A 230 V AC with varistor

Lieske Part No. 1861730
Mfg Part No RSB2A080P7PV
EAN-Code 3606489562793
Manufacturer Schneider Electric
Here only 25,55 EUR
30,40 EUR incl. VAT

Further information for Schneider Electric RSB2A080P7PV relay 2 We 8 A 230 V AC with varistor

Complementary
Average resistance32500 Ohm network: AC at 20 °C +/- 15 %
[Ue] rated operational voltage184...253 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage3.6 kV conforming to IEC 61000-4-5
[Ie] rated operational current4 A (AC-1/DC-1) NC conforming to IEC; 8 A (AC-1/DC-1) NO conforming to IEC
[Ui] rated insulation voltage400 V conforming to IEC 60947
Maximum switching voltage300 V DC conforming to IEC
Drop-out voltage threshold>= 0.15 Uc AC
Load current8 A at 250 V AC; 8 A at 28 V DC
minimum switching current10 mA
Maximum switching capacity2000 VA AC; 224 W DC
minimum switching voltage12 V
Minimum switching capacity120 mW at 10 mA, 12 V
Operating time20 ms operating; 20 ms reset
Mechanical durability5000000 cycles
Electrical durability100000 cycles, 8 A at 250 V, AC-1 NO; 100000 cycles, 4 A at 250 V, AC-1 NC
Safety reliability dataB10d = 100000
Average coil consumption0.75 VA AC
Contact terminal arrangementSeparate
Connections - terminalsConnector, 1 x 0.25...1 x 2.5 mm² (22 AWG...14 AWG) flexible with cable end; Connector, 2 x 0.25...2 x 1 mm² (22 AWG...17 AWG) flexible with cable end; Connector, 1 x 0.5...1 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Connector, 2 x 0.5...2 x 1.5 mm² (20 AWG...16 AWG) solid without cable end
torque value0.8 N.m; 0.8 N.m
Protection categoryRT I
Operating positionAny position
Test levelsLevel A group mounting
Device presentationComplete product
Sale per indivisible quantity30
Contacts materialSilver alloy (AgNi)
Shape of pinFlat (PCB type)
Net weight0.057 kg
Compatibility codeRSB
Contractual warranty
Warranty (in months)18
Environment
Dielectric strength1000 V AC between contacts; 2500 V AC between poles; 5000 V AC between coil and contact
Vibration resistance+/- 1 mm (f= 10…55 Hz) conforming to IEC 60068-2-6
IP degree of protectionIP20 conforming to IEC 60529
Ambient air temperature for operation-40…70 °C (AC)
StandardsIEC 61810-1; CSA C22.2 No 14; UL 508; IEC 61984
Product certificationsCE; UL; CSA; EAC
Ambient air temperature for storage-40…85 °C
Shock resistance10 gn (duration = 11 ms) for not operating conforming to IEC 60068-2-27; 5 gn (duration = 11 ms) for in operation conforming to IEC 60068-2-27
Logistical informations
Country of originID
Main
Range of productHarmony Electromechanical Relays
Series nameRSB series
Product or component typePre-assembled plug-in relay with socket
Relay typeInterface relay
Contacts type and composition2 C/O
Contact operationStandard
status LEDWith
[Uc] control circuit voltage230 V AC 50/60 Hz
Control typeWithout lockable test button
[Ithe] conventional enclosed thermal current8 A at -40…40 °C
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height1.600 cm
Package 1 Width7.500 cm
Package 1 Length8.500 cm
Package 1 Weight56.000 g
Unit Type of Package 2BB1
Number of Units in Package 230
Package 2 Height8.500 cm
Package 2 Width18.400 cm
Package 2 Length27.400 cm
Package 2 Weight2.013 kg
Unit Type of Package 3S03
Number of Units in Package 3180
Package 3 Height30 cm
Package 3 Width30 cm
Package 3 Length40 cm
Package 3 Weight12.797 kg
Harmony Relay. Pre-assembled and ready-to-use interface relay RSB consisting of relay, base, protection module with LED display, retaining bracket and label. Number of contacts - 2, design - relay changeover contact, contact load capacity - 8 A each. Coil control voltage - 230 VAC. Plug-in base with screw terminals in separate arrangement for mounting on top hat rail or screwable onto mounting plate. Protection module - varistor. Plastic retaining bracket for fixing and easy removal of the relay. Label for identification. All components are assembled ready for use and the pre-assembled relay can be used immediately.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1861730
qrcode für Schneider Electric RSB2A080P7PV relay 2 We 8 A 230 V AC with varistor