Complementary
Control type	Lockable test button
[Ie] rated operational current	15 A at 277 V (AC) conforming to UL; 15 A at 28 V (DC) conforming to UL; 15 A at 250 V (AC) NO conforming to IEC; 15 A at 28 V (DC) NO conforming to IEC; 7.5 A at 250 V (AC) NC conforming to IEC; 7.5 A at 28 V (DC) NC conforming to IEC
Degree of protection (Housing only)	IP40 conforming to IEC 60529
Rated operational voltage limits	96...132 V AC
[Ui] rated insulation voltage	250 V conforming to IEC; 300 V conforming to CSA; 300 V conforming to UL
Maximum switching voltage	250 V conforming to IEC
Drop-out voltage threshold	>= 0.15 Uc AC
Average resistance	4430 Ohm at 20 °C +/- 15 %
Maximum switching capacity	3750 VA; 420 W
Load current	15 A at 250 V AC; 15 A at 28 V DC
Operating time	20 ms at nominal voltage
Mechanical durability	10000000 cycles
Electrical durability	100000 cycles for resistive load
Safety reliability data	B10d = 100000
Utilisation coefficient	20 %
Dielectric strength	1500 V AC between contacts with micro disconnection; 2000 V AC between coil and contact with reinforced
[Uimp] rated impulse withstand voltage	4 kV during 1.2/50 µs
Protection category	RT I
Mounting support	Plug-in
Operating position	Any position
Test levels	Level A group mounting
Device presentation	Complete product
Contacts material	AgNi
Shape of pin	Flat (faston type)
Net weight	0.026 kg
Contractual warranty
Warranty (in months)	18
Environment
Average coil consumption in VA	1.6 at 60 Hz
Pollution degree	3
Standards	UL 508; CSA C22.2 No 14; IEC 61810-1
Product certifications	UL; EAC; CSA
Ambient air temperature for storage	-40…85 °C
Vibration resistance	3 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles in operation; 5 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles not operating
Shock resistance	15 gn for in operation; 30 gn for not operating
Logistical informations
Country of origin	CN
Main
Range of product	Harmony Electromechanical Relays
Series name	RPM series
Product or component type	Plug-in relay
Contacts type and composition	1 C/O
Relay type	Power relay
status LED	Without
[Uc] control circuit voltage	120 V AC 50/60 Hz
Minimum switching capacity	170 mW at 10 mA, 17 V
Release time	20 ms at nominal voltage
Ambient air temperature for operation	-40…55 °C
[Ithe] conventional enclosed thermal current	15 A at -40…55 °C
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	1.500 cm
Package 1 Width	2.800 cm
Package 1 Length	4.900 cm
Package 1 Weight	24.000 g
Unit Type of Package 2	BB1
Number of Units in Package 2	10
Package 2 Height	3.300 cm
Package 2 Width	8.300 cm
Package 2 Length	11.200 cm
Package 2 Weight	271.000 g
Unit Type of Package 3	S01
Number of Units in Package 3	160
Package 3 Height	15 cm
Package 3 Width	15 cm
Package 3 Length	40 cm
Package 3 Weight	4.634 kg

Harmony Relay. RPM power relay as a component. Number of contacts 1, relay changeover design, contact load capacity 15 A. Coil control voltage 120 VAC. Mechanical position indicator yes, LED indicator no. Test button for testing the contacts yes, test lever for permanent switching for test purposes yes, operation without tools. Connections stable flat pins. Installation in a separate plug-in base.