Schneider Electric RMNF22TB30, EAN: 3606489591120

Schneider Electric RMNF22TB30 voltage monitoring 208-480 VAC

Measurement > Other Measuring Devices

Schneider Electric RMNF22TB30 voltage monitoring 208-480 VAC

Lieske Part No. 1778522
Mfg Part No RMNF22TB30
EAN-Code 3606489591120
Manufacturer Schneider Electric
Here only 149,15 EUR
177,49 EUR incl. VAT

Further information for Schneider Electric RMNF22TB30 voltage monitoring 208-480 VAC

Complementary
[Us] rated supply voltage208...480 V AC 50/60 Hz, non self-powered; 120...277 V AC 50/60 Hz, non self-powered
Supply voltage limits166.4…576 V AC line to line; 96…332.4 V AC line to neutral
Supply frequency50...60 Hz +/- 10 %
Power consumption in VA4 VA at 480 V AC 60 Hz
Immunity to microbreaks10 ms less than or equal
Measurement range208...480 V AC
Maximum measuring cycle150 ms measurement cycle as true rms value
Threshold adjustment voltage2...20 % of Un selected
Hysteresis3 % fixed of at nominal voltage for phase failure detection
Adjustment of asymmetry threshold2...20 % of Un selected
Repeat accuracy+/- 0.5 % for input and measurement circuit; +/- 3 % for time delay
Measurement error+/- 0.05 %/°C with temperature variation; +/- 0.05 %/Hz with frequency variation
Time delay typeAdjustable 0.1 s...60 min Tt- time delay upon fault
Setting accuracy of time delay+/- 3 % for 10 s...60 min time delay range; +/- 300 ms for 0...10 s time delay range
Reset time1500 ms at maximum rated voltage
Power on Delay650 ms
Output contacts2 C/O
nominal output current8 A
Maximum switching voltage250 V AC
Switching capacity in VA2000 VA
Minimum switching current10 mA at 12 V DC
Maximum switching current8 A AC
Electrical durability100000 cycles
Mechanical durability10000000 cycles
Utilisation categoryAC-15 250 V AC 3 A conforming to IEC 60947-5-1; DC-13 24 V DC 2 A conforming to IEC 60947-5-1; AC-1 250 V AC 8 A conforming to IEC 60947-4-1; DC-1 24 V DC 5 A conforming to IEC 60947-4-1
NFC operating frequency13.56 MHz
Maximum RF power transmitted0.0002 mW
Alarm threshold166...576 V adjustable overvoltage and undervoltage detection (line to line); 96...332 V adjustable overvoltage and undervoltage detection (line to neutral); 5...150 V adjustable asymmetry; 45...66 Hz adjustable overfrequency or underfrequency
Operating systemAndroidversion >= V7.0; IOSversion >= V14.5
Contractual warranty
Warranty (in months)18
Environment
Electromagnetic compatibilityImmunity for industrial environments conforming to IEC 61000-6-2; Surge immunity test - test level: 2 kV level 4 (differential mode) conforming to IEC 61000-4-5; Immunity for residential, commercial and light-industrial environments conforming to IEC 61000-6-1; Emission standard for industrial environments conforming to IEC 61000-6-4; Surge immunity test - test level: 4 kV level 4 (common mode) conforming to IEC 61000-4-5
StandardsEN/IEC 60255-1
Product certificationsCE; UL; CSA; CCC; EAC; RCM; UKCA
MarkingWEEE; China RoHS; ROHS
Directives2014/30/EU - electromagnetic compatibility; 2014/35/EU - low voltage directive; 2014/53/EU - radio equipment directive
Ambient air temperature for storage-40…70 °C; -40…70 °C
Ambient air temperature for operation-30…60 °C; -30…60 °C
Relative humidity93…97 % at 25…55 °C conforming to IEC 60068-2-30; at 25…55 °C
Vibration resistance0.075 mm (f= 10…58.1 Hz) not in operation conforming to IEC 60068-2-6; 1 gn (f= 58.1…150 Hz) not in operation conforming to IEC 60068-2-6; 0.035 mm (f= 10…60.1 Hz) in operation conforming to IEC 60068-2-6; 0.5 gn (f= 60.1…150 Hz) in operation conforming to IEC 60068-2-6
Shock resistance15 gn (duration = 11 ms) for not in operation conforming to IEC 60068-2-27; 5 gn (duration = 11 ms) for in operation conforming to IEC 60068-2-27
IP degree of protectionIP20 (terminals) conforming to IEC 60529; IP40 (housing) conforming to IEC 60529; IP40 (front panel) conforming to IEC 60529
Pollution degree3 conforming to IEC 60664-1; 3 conforming to UL 508
Overvoltage categoryIII conforming to IEC 60664-1; III conforming to UL 508
Dielectric test voltage2.5 kV, 1 min AC 50 Hz conforming to IEC 60255-27
[Uimp] rated impulse withstand voltage4 kV conforming to IEC 60664-1
Insulation resistance> 100 MOhm at 500 V DC conforming to IEC 60255-27
[Ui] rated insulation voltage400 V conforming to IEC 60664-1
Operating positionAny position without derating
Connections - terminalsScrew terminals, 2 x 0.5...2 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Screw terminals, 2 x 0.2...2 x 1.5 mm² (24 AWG...16 AWG) flexible with cable end; Screw terminals, 1 x 0.5...1 x 4 mm² (20 AWG...12 AWG) solid without cable end; Screw terminals, 1 x 0.2...1 x 2.5 mm² (24 AWG...14 AWG) flexible with cable end
Tightening torque0.6…1 N.m conforming to IEC 60947-1; 0.6…1.006 N.m
Housing materialPolycarbonate
Mounting support35 mm symmetrical DIN rail conforming to IEC 60715
Reliability dataMTTF = 128.5 years
Height90 mm; 88.9 mm
Width22.5 mm; 22.9 mm
Depth99 mm; 99.06 mm
Net weight0.125 kg; 0.13 kg
Logistical informations
Country of originID
Main
Range of productHarmony Control Relays
Relay typeNFC control relay
Relay nameRMNF22
Relay monitored parametersPhase sequence; Phase failure detection; Overvoltage detection; Undervoltage detection; Overfrequency and underfrequency; Asymmetry
Control typeWithout Diagnostic button
Software designationEcostruxure Industrial Device (downloadable from Google Play store or Apple Store)
Product compatibilityNFC enabled mobile device
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height3.000 cm
Package 1 Width10.000 cm
Package 1 Length10.800 cm
Package 1 Weight138.000 g
Unit Type of Package 2S02
Number of Units in Package 236
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight5.578 kg
Unit Type of Package 3P06
Number of Units in Package 3576
Package 3 Height75.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight98.000 kg
This 3-phase control relay belongs to the Harmony control relay range from Schneider Electric. This 3-phase control relay is equipped with NFC technology which allows digital operation instead of analogue operation. This is an 8A multifunction 3-phase control relay that monitors 3-phase or 3-phase with neutral and has an adjustable time delay from 0.1s to 60min. Using the Harmony NFC App, different alarms can be combined with AND, OR and NOT logic to form unique monitoring combinations for the two relay outputs, which are individually configurable. The NFC 3-phase control relay is a single reference that supports 7 functions: phase loss, phase sequence, asymmetry, undervoltage, overvoltage, underfrequency and overfrequency. The 3-phase control is protected to IP20 (terminals), IP40 (housing) and IP40 (front panel). In addition, the 4-digit password increases security by preventing unauthorized changes to the settings. This RMNF22 has dimensions of 22.5 mm (width) x 90 mm (height) x 99 mm (depth) and weighs 0.125 kg. It is ideal for controlling various functions in the packaging, elevator, hoist, textile and water industries. It is compliant with the international standard EN/IEC 60255-1 and certifications such as UL, CSA, CE, CCC, EAC and RCM. It is sold as a single unit. Monitoring and testing are now intuitive as exact fault conditions can be identified via the front LEDs and the data can be analyzed using the Harmony NFC app. This saves time and increases efficiency.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1778522
qrcode für Schneider Electric RMNF22TB30 voltage monitoring 208-480 VAC