| Complementary |
| Protection type | Reverse polarity protection on power supply; Overvoltage protection on output; Short-circuit protection on output |
| [Us] rated supply voltage | 24 V DC +30 %...-25 %, isolated |
| Measurement error | +/- 0.2 % of full scale |
| Repeat accuracy | +/-0.06 % |
| Clamping connection capacity | 20...12 AWG |
| Tightening torque | 0.4…0.5 N.m; 0.4…0.5 N.m |
| Marking | CULus; DNV; CE; UKCA; WEEE; China RoHS |
| Surge withstand | 1 kV during 1.2/50 µs conforming to IEC 61000-4-5 |
| [Ui] rated insulation voltage | 300 V; 600 V |
| Fixing mode | Clip-on (35 mm DIN rail) |
| Safety reliability data | MTTFd = 316.5 years; B10d = 292138 |
| Net weight | 0.10 kg |
| Temperature coefficient | < 150 ppm/°C |
| Wire stripping length | 8…9 mm |
| Status LED | 3 LEDs (green) PWR (Power Status); (red) high signal level; (red) low signal level |
| Overvoltage category | II |
| Width | 22.5 mm |
| Height | 107.5 mm |
| Depth | 113.6 mm |
| Relative humidity | 5…95 % |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Product certifications | cULus; DNV |
| IP degree of protection | IP20 |
| Shock resistance | 50 gn for 11 ms conforming to IEC 60068-2-27 |
| Vibration resistance | 5 gn (f= 10…150 Hz) conforming to IEC 60068-2-6 |
| Resistance to electrostatic discharge | 6 kV (in contact) conforming to IEC 61000-4-2; 8 kV (in air) conforming to IEC 61000-4-2 |
| Ambient air temperature for storage | -40…85 °C |
| Ambient air temperature for operation | -40…70 °C |
| Pollution degree | 2 conforming to IEC 60664-1 |
| Operating altitude | 0...2000 m |
| Electromagnetic emission | Conducted emissions conforming to CISPR 11; Radiated emissions conforming to CISPR 11 |
| Dielectric strength | 5.4 kV AC between the inputs and the supply circuit; 3 kV AC between the outputs and the supply circuit; 5.4 kV AC between input and output |
| Logistical informations |
| Country of origin | CN |
| Main |
| Range of product | Harmony Analog |
| Product or component type | Voltage transducer |
| Analogue input type | Voltage 0...500 V |
| Analogue output type | Current 0...20 mA = 10 kOhm; Voltage 0...5 V >= 10 kOhm; Voltage 1...5 V >= 10 kOhm |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 3.200 cm |
| Package 1 Width | 11.500 cm |
| Package 1 Length | 12.500 cm |
| Package 1 Weight | 120.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 25 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 3.444 kg |
Die Signalwandler der Baureihe Harmony Analog sind analoge Messumformer zur nahtlosen Integration in Industrielle Automatisierungs- und Prozesssteuerungssysteme. Dieser Spannungswandler wandlet elektrische Spannungsmessungen in isolierte Analogsignale um. Dabei unterstützt er die indirekte Messung von Wechsel-/Gleichspannungen bis zu 0-500V und liefert Ausgangssignale wie 0(4)-20mA, 0(2)-10V oder 0(1)-5 V. Mit seinem kompakten Design von 22,5 mm und dem einfachen Zugang zur Verdrahtung vereinfacht der RMCV1UUBD die Installation, Inbetriebnahme und Fehlerbehebung und eignet sich somit ideal für Schaltschränke und industrielle Umgebungen. Zudem verfügt dieser Messumformer über Diagnose-LEDs. Aufgrund der Vielzahl von vorhandenen Produktstandards und Zertifizierungen geeignet für den internationalen Einsatz. Zudem können Sie detaillierte Informationen zu Materialinhalten, Umweltauswirkungen und Kreislaufwirtschaft erhalten, die Ihre Nachhaltigkeitsziele unterstützen.