Complementary
[Us] rated supply voltage	24...240 V AC/DC 50/60 Hz, non self-powered
Supply voltage limits	20.4…264 V AC/DC
Maximum power consumption in VA	3.5 VA AC
Maximum power consumption in W	0.6 W DC
Measurement range	150 mA...15 A current AC/DC
Maximum measuring cycle	30 ms measurement cycle as true rms value
Hysteresis	5…50 % of threshold setting
Repeat accuracy	+/- 0.5 % for input and measurement circuit; +/- 2 % for time delay
Measurement error	0.05 %/°C with temperature variation; 1 by volt over the whole range with voltage variation
Time delay type	Adjustable 0.3...30 s, 0 + 10 % Tt- time delay upon fault; Adjustable 1...20 s, 0 + 10 % Ti- inhibition time delay upon startup
Setting accuracy of time delay	10 %
Reset time	1500 ms time delay
Power on Delay	300 ms
Output contacts	2 C/O
nominal output current	5 A
Maximum switching voltage	250 V AC/DC
Switching capacity in VA	1250 VA
Minimum switching current	10 mA at 5 V DC
Maximum switching current	5 A AC/DC
Electrical durability	100000 cycles
Mechanical durability	30000000 cycles
operating voltage tolerance	- 15 % + 10 % Un
Control circuit frequency	40...70 Hz +/- 10 %
Resistance across terminals	0.005 Ohm at E3-M terminals; 0.015 Ohm at E2-M terminals; 0.05 Ohm at E1-M terminals
Measurement accuracy	+/- 10 % of the full scale value
Threshold setting	10...100 %
Insulation	Between supply and measurement
Contacts material	Cadmium free
Contractual warranty
Warranty (in months)	18
Environment
Electromagnetic compatibility	Emission standard for industrial environments conforming to IEC 61000-6-4; Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3; Immunity for industrial environments conforming to NF EN/IEC 61000-6-2
Standards	IEC 60255-6
Product certifications	GL; UL; GOST; C-Tick; CSA
Marking	CE : EMC 89/336/EEC; CE : 73/23/EEC
Ambient air temperature for storage	-40…70 °C; -40…70 °C
Ambient air temperature for operation	-20…50 °C
Relative humidity	95 % at 55 °C conforming to IEC 60068-2-30
IP degree of protection	IP20 (terminals) conforming to IEC 60529; IP30 (casing) conforming to IEC 60529
Pollution degree	3 conforming to IEC 60664-1
Overvoltage category	III conforming to IEC 60664-1
Dielectric test voltage	2 kV, 1 min AC 50 Hz conforming to IEC 60255-5
Insulation resistance	> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5
[Ui] rated insulation voltage	250 V conforming to IEC 60664-1
Operating position	Any position without derating
Connections - terminals	Screw terminals, 1 x 0.5...1 x 4 mm² (20 AWG...11 AWG) solid without cable end; Screw terminals, 2 x 0.5...2 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Screw terminals, 1 x 0.2...1 x 2.5 mm² (24 AWG...12 AWG) flexible with cable end; Screw terminals, 2 x 0.2...2 x 1.5 mm² (24 AWG...16 AWG) flexible with cable end
Tightening torque	0.6…1 N.m conforming to IEC 60947-1
Housing material	Polycarbonate
Local signalling	LED (green) for power ON; LED (yellow) for relay ON
Mounting support	35 mm symmetrical DIN rail conforming to IEC 60715
Reliability data	MTTFd = 296.8 years; B10d = 270000
Height	90 mm; 88.9 mm
Width	35 mm; 35.6 mm
Depth	72 mm; 71.1 mm
Net weight	0.13 kg; 0.13 kg
Logistical informations
Country of origin	ID
Main
Range of product	Harmony Control Relays
Relay type	Current control relay
Product or component type	Current control relay
Relay name	RM35JA
Relay monitored parameters	Overcurrent or undercurrent detection
Control type	Without test button
Contacts type and composition	2 C/O
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	4.500 cm
Package 1 Width	8.000 cm
Package 1 Length	9.500 cm
Package 1 Weight	136.000 g
Unit Type of Package 2	S03
Number of Units in Package 2	48
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	7.291 kg

Harmony Control. This current monitoring relay monitors a conductor for exceedance or undershoot of the set limit value in the range 0.15-15 A. Two relay changeover switches are available for reporting, which can be loaded up to 5 A. The mode of operation, the limit value, the switching hysteresis and a drop-out delay are adjustable. The settings are made using control elements on the front, which can be protected against changes under a transparent cover. The width is 35 mm and it is mounted on the top hat rail. The wide voltage power supply 24-240 VAC/DC (50-60 Hz) enables universal use. The cable connection is made using screw terminals.