Complementary
[Us] rated supply voltage	380...415 V AC 50/60 Hz, non self-powered
Supply voltage limits	323…456.5 V AC
Maximum power consumption in VA	8 VA
Measurement range	150 mA...15 A AC 50/60 Hz
Maximum measuring cycle	100 ms measurement cycle as true rms value
Hysteresis	5…50 % adjustable of threshold setting; 3 % fixed of full scale for window mode
Setting accuracy of the switching threshold	+/- 10 % of the full scale; +/- 20 % of the full scale
Repeat accuracy	+/- 0.5 % for input and measurement circuit; +/- 2 % for time delay
Measurement error	< 1 % over the whole range with voltage variation; 0.05 %/°C with temperature variation
Time delay type	Adjustable 0.1...30 s, +/- 10 % of the full scale value Tt- time delay upon fault
Setting accuracy of time delay	10 %
Reset time	1500 ms at maximum voltage
Power on Delay	300 ms
Output contacts	2 C/O
nominal output current	8 A
Maximum switching voltage	250 V AC
Switching capacity in VA	2000 VA
Minimum switching current	10 mA at 5 V DC
Maximum switching current	8 A AC
Electrical durability	100000 cycles
Mechanical durability	10000000 cycles
operating voltage tolerance	- 15 % + 10 % Un
Resistance across terminals	0.005 Ohm at E3-M terminals; 0.015 Ohm at E2-M terminals; 0.05 Ohm at E1-M terminals
Threshold setting	10...100 %
Insulation	Between supply and measurement
Contacts material	Cadmium free
Contractual warranty
Warranty (in months)	18
Environment
Standards	IEC 60255-1
Product certifications	CCC; EAC; CSA; RCM; UL; GL; CE
Ambient air temperature for storage	-40…70 °C; -40…70 °C
Ambient air temperature for operation	-20…50 °C at 60 Hz; -20…60 °C at 50 Hz
Relative humidity	93…97 % at 25…55 °C conforming to IEC 60068-2-30
Vibration resistance	0.075 mm (f= 10…58.1 Hz) not in operation conforming to IEC 60068-2-6; 1 gn (f= 10…58.1 Hz) not in operation conforming to IEC 60068-2-6; 0.035 mm (f= 58.1…150 Hz) in operation conforming to IEC 60068-2-6; 0.5 gn (f= 58.1…150 Hz) in operation conforming to IEC 60068-2-6
Shock resistance	15 gn (duration = 11 ms) for not in operation conforming to IEC 60068-2-27; 5 gn (duration = 11 ms) for in operation conforming to IEC 60068-2-27
IP degree of protection	IP20 (terminals) conforming to IEC 60529; IP50 (front panel) conforming to IEC 60529; IP30 (housing) conforming to IEC 60529
Pollution degree	3 conforming to IEC 60664-1
Overvoltage category	III conforming to IEC 60664-1
Dielectric test voltage	2.5 kV, 1 min AC 50 Hz conforming to IEC 60255-27
Insulation resistance	> 100 MOhm at 500 V DC conforming to IEC 60255-27
Connections - terminals	Screw terminals, 2 x 0.5...2 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Screw terminals, 2 x 0.2...2 x 1.5 mm² (24 AWG...16 AWG) flexible with cable end; Screw terminals, 1 x 0.5...1 x 3.3 mm² (20 AWG...12 AWG) solid without cable end; Screw terminals, 1 x 0.2...1 x 2.5 mm² (24 AWG...14 AWG) flexible with cable end
Tightening torque	0.6…1 N.m conforming to IEC 60947-1
Housing material	Polycarbonate
Local signalling	LED (yellow) for relay ON; LED (green) for power ON
Mounting support	35 mm DIN rail conforming to IEC 60715
Reliability data	MTTFd = 296.8 years; B10d = 270000
Height	90 mm; 88.9 mm
Width	35 mm; 35.6 mm
Depth	73 mm; 73.7 mm
Net weight	0.12 kg; 0.12 kg
Environmental characteristic	3K3 C
Logistical informations
Country of origin	ID
Main
Range of product	Harmony Control Relays
Relay type	Current control relay
Product or component type	Current control relay
Relay name	RM35JA
Relay monitored parameters	Overcurrent or undercurrent detection; Overcurrent or undercurrent in window mode
Control type	With test button
Contacts type and composition	2 C/O
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	7.8 cm
Package 1 Width	4.5 cm
Package 1 Length	9.5 cm
Package 1 Weight	129 g
Unit Type of Package 2	S02
Number of Units in Package 2	40
Package 2 Height	15 cm
Package 2 Width	30 cm
Package 2 Length	40 cm
Package 2 Weight	4.532 kg
Unit Type of Package 3	P06
Number of Units in Package 3	640
Package 3 Height	75 cm
Package 3 Width	40 cm
Package 3 Length	80 cm
Package 3 Weight	107.56 kg

Harmony Control. This current monitoring relay monitors a conductor for exceedance or undershoot of the set limit value (1.5-15 A). You can choose between exceedance, undershoot and overshoot and undershoot in window mode. An error memory is optionally available, which holds the error message until a reset. Two relay changeover switches are available for reporting, which can be loaded up to 8 A. The mode of operation, the limit value, the switching hysteresis and a drop-out delay can be set. The settings are made using control elements on the front, which can be protected against changes under a transparent cover. An illuminated scale arrow makes it very easy to see the setting of the potentiometers, even from a distance. The diagnostic switch on the front enables the output relays to be switched off to test the entire application. When the transparent cover is closed, the diagnostic switch is automatically reset. The supply voltage is 380-415 VAC. Two LEDs show the status. The width is 35 mm and it is mounted on a top hat rail. The cable connection is made via screw terminals.