Complementary
Product compatibility	Wireless access point
Maximum power consumption in W	HW V2: 3.5 W 24 V; HW V1: 3 W 24 V
Communication network type	HW V2: Wi-Fi infrastructure5 GHz; HW V2: Wi-Fi infrastructure2.4 GHz; HW V1: Wi-Fi infrastructure2.4 GHz; Ethernet 10/100BASE-T; Wi-Fi access point2.4 GHz; Wireless IEEE 802.15.4; Modbus RTU Modbus RTU client even/odd or none parity 1.2...115.2 kbit/s
Communication port protocol	Modbus TCP; DHCP; HTTPS; NTP/SNTP; IPv4; IPv6; TCP/IP
Communication port support	2 RJ45: ETHERNET; Screw terminal block: RS485
Number of server device(s)	32 Modbus RTU product(s) ; 128 Modbus TCP/IP product(s) ; 40 wireless (IEEE 802.15.4) product(s) - mixed; 85 wireless (IEEE 802.15.4) product(s) - depending on configuration
Number of devices	64 Modbus TCP/IP
Memory capacity	HW V2: 32 GB eMMC; HW V1: 512 MB NAND
Number of inputs	2 digital
Connections - terminals	Discrete I/O: screw terminal block (top) 0.14…1.5 mm² cable(s) ; Power supply: screw terminal block (top) 1.5…2.5 mm² cable(s) ; Communication: screw terminal block (bottom) 0.14…1.5 mm² cable(s)
Tightening torque	Discrete I/O: 0.25 N.m; Power supply: 0.6 N.m; Communication: 0.25 N.m
Wire stripping length	Power supply: 7 mm; Communication: 7 mm; Discrete I/O: 7 mm
Number of connectors	HW V2: 2 screw connector for Wi-Fi and IEEE 802.15.4; HW V1: 1 screw connector for Wi-Fi
Connector type	HW V2: connector(s)1 x RP-SMA Wi-Fi for antenna bottom; HW V2: connector(s)1 x RP-SMA IEEE 802.15.4 for antenna top; HW V1: connector(s)1 x RP-SMA Wi-Fi for antenna bottom
Mounting mode	Clip-on
Mounting support	DIN rail
Product certifications	CE; cULus; CB; RCM; UKCA; FCC; IC; DNV Marine; ANSI RF; IACS E10
Standards	IEC 61010; IEC 61010-1; IEC 61010-2-201; UL 61010; UL 61010-1; UL 61010-2-201; EN 61010-1; EN 61010-2-201; CAN/CSA C22.2 No. 61010-1-12; CAN/CSA C22.2 No. 61010-2-201; IEC 62974-1; IEC 61326-1; EN 61326-1; ETSI EN 301 489-1; ETSI EN 301 489-17; EN 301-893; EN 55032; CISPR 11; ETSI EN 300 328; IEEE 802.15.4; IEEE 802.11a/b/g/n; IEEE 802.3 af/at; FCC CFR 47 part 15 class A; EN 62311; IEC 62311; ANSI C63.10; IEC 60945; EN 62974-1; DNVGL-GC-0339
Depth	70.2 mm
Height	93 mm
Width	72 mm
Net weight	181 g
Data recording	Real time data monitoring
Data buffer for data publication (cloud, SFTP, HTTPS) depending on network	1 month(s)
Function available	Embedded web page for configuration and upgrade; Diagnosis capabilities; Diagnostic report; Diagnostics on communication; Energy management; With integrated web server; Firmware update; Backup/restore configuration; Configurable event
Product specific application	Wireless Schneider Electric devices ecosystem
Topology	Separated Ethernet network; Switched Ethernet network
Web services	HTTPS server; SFTP publication (CSV / JSON); HTTPS publication (CSV / JSON)
Communication service	Device Profile for Web Services (DPWS); Modbus TCP client; Modbus TCP server; SNTP client; DHCP client; RSTP
Commissioning interface	EcoStruxure Power Commission desktop; EcoStruxure Power Commission Mobile (through Wi-Fi Access point); EcoStruxure Power Commission web (for third party device integration); Web page
Realtime clock	With RTC-battery set; With user calibration
Time synchronisation protocol	NTP; SNTP
Range compatibility	EcoStruxure Facility Expert; EcoStruxure Building Operation; EcoStruxure Power Operation; EcoStruxure Power Monitoring Expert; EcoStruxure Asset Advisor; EcoStruxure Energy Hub; EcoStruxure Resource Advisor; Third party SCADA
Communication iinterface	Modbus and wireless (IEEE802.15.4) product
Contractual warranty
Warranty (in months)	18
Environment
Relative humidity	5…95 %
IP degree of protection	IP40 (front face); IP20 (casing)
Ambient air temperature for operation	-25…70 °C at < 2000 m; -25…60 °C at 2000...4000 m
Derating factor	With temperature derating of -1 °C per 200 m 4000...5000 m
Ambient air temperature for storage	-40…85 °C
Pollution degree	3
Operating altitude	< 5000 m
Logistical informations
Country of origin	IN
Main
Range	EcoStruxure
Product name	Panel Server Universal
Product or component type	Gateway
Device short name	PAS600L
Device application	Gateway
[Us] rated supply voltage	24 V DC
Communication gateway	Ethernet TCP/IP to wireless devices; Ethernet/serial
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	8.800 cm
Package 1 Width	9.000 cm
Package 1 Length	11.300 cm
Package 1 Weight	245.000 g
Unit Type of Package 2	S03
Number of Units in Package 2	27
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	7.232 kg
Unit Type of Package 3	P06
Number of Units in Package 3	216
Package 3 Height	75.000 cm
Package 3 Width	60.000 cm
Package 3 Length	80.000 cm
Package 3 Weight	69.552 kg

The EcoStruxure Panel Server Universal is an Ethernet (Modbus TCP) connection gateway for end devices (e.g. PowerTag) that communicate wirelessly via radio and for Modbus RTU (RS485) devices, with websites for data display. Also for expanding the EcoStruxure Panel Server Advanced with measuring devices in other properties. Offers alarm management via email for connected PowerTags for final circuits as well as accurate real-time measurements of energy, power, current and voltage. Easy commissioning via integrated web server or with EcoStruxure Power Commission for configuration report and register documentation. Easy troubleshooting in the system thanks to extended diagnostic information and event logs. Data buffer of selected measured values for approx. 1 month for Schneider Electric cloud applications. Two 100Base-T Ethernet RJ45 connections. Modbus RS485 connection via plug-in screw terminal. Connection for external radio/Wi-Fi antenna. Connection for two digital inputs for potential-free contact or S0 pulses (WAGES). Certifications such as CE, UL/CSA, IEC61010, UL61010, IEC61974-1, Marine certification, IEC61443-4-2, RCM, EAC and UKCA. Power supply: 24VDC 3W max. Mounting on DIN rail, 4 modules, width 72 mm, depth 70 mm and height 85 mm. Operating temperature -25°C to +70°C, relative humidity 5-95%.