Schneider Electric NSYTLEME, EAN: 3606480467653

Schneider Electric NSYTLEME cable entry plate 445x130

Installation > Distributor Cabinets > Wall, Stand, distribution systems

Schneider Electric NSYTLEME cable entry plate 445x130

Lieske Part No. 317993
Mfg Part No NSYTLEME
EAN-Code 3606480467653
Manufacturer Schneider Electric
Here only 69,44 EUR
82,63 EUR incl. VAT

Further information for Schneider Electric NSYTLEME cable entry plate 445x130

Complementary
ColourPlate: grey (RAL 7035)
Surface finishEpoxy-polyester powder
Height30 mm
Width445 mm; Real: 460 mm
Depth130 mm
Net weight0.882 kg
thickness1.5 mm
Number of cut-outUndrilled
Cut-out dimensions378 x 63 mm
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originFR
Main
RangePanelSeT
Product or component typeFlexicable gland plate
Accessory / separate part categoryCable management accessory
ApplicationMulti-purpose
Range compatibilityPanelSeT S3D; PanelSeT PanelSeT CRNG
Mounting locationEnclosure bottom
Cable gland typePierceable by screwdriver
Type of gland plateMembrane
Cable outer diameter10…26 mm
Cable entryWithout
Device composition1 plate; membrane
Quantity per setSet of 1
MaterialPlate: steel; Membrane: HCE (heat curable elastomer)
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height3.000 cm
Package 1 Width13.500 cm
Package 1 Length46.000 cm
Package 1 Weight964.000 g
Unit Type of Package 2P12
Number of Units in Package 230
Package 2 Height49.000 cm
Package 2 Width80.000 cm
Package 2 Length120.000 cm
Package 2 Weight43.920 kg
The NSYTLEME Flexible Cable Entry Plate from Schneider Electric is an accessory for cable routing in distribution and meter enclosures of the PanelSeT series. It serves as a flexible flange plate for secure and easy cable passage through the enclosure base, particularly for the PanelSeT S3D and PanelSeT CRNG product families. The plate is mounted on the underside of the enclosure and enables organized and impact-resistant cable connections, with cable glands installed through perforatable cutouts using a screwdriver.

Applications

The cable entry plate is designed for use in industrial and commercial electrical installations where flexible and robust cable routing is required. It is particularly suitable for distribution and control enclosures where cables must be introduced from below. The membrane bead cable technology ensures a tight seal that compensates for mechanical stress and cable movement without affecting electrical conductivity. The plate is designed for cables with an outer diameter of 10 to 26 mm, covering a wide range of cable types.

Functions and Features in Detail

The plate is made of sheet steel with a thickness of 1.5 mm, coated with an epoxy-polyester powder coating to resist corrosion and mechanical stress. The surface is finished in Grey RAL 7035, enabling visual harmonization with other components of the PanelSeT series. The flexible membrane made of HCE (heat-curing elastomer) ensures a tight seal and prevents dust or moisture ingress. The plate is delivered unperforated, allowing the number and position of cable entries to be customized according to the specific installation.

Technology Explained Simply

The membrane technology allows cables to be passed through the plate without requiring a fixed hole. The membrane expands when pierced with a screwdriver and then seals tightly around the cable, creating a secure connection. This reduces the need for additional glands or seals. The flexible flange plate is therefore particularly suitable for applications where cable routing needs to be adjusted during installation or in operation. Dimensions are 445 mm (width) × 130 mm (depth) × 30 mm (height), with an actual width of 460 mm to ensure secure mounting.

Compatibility and Accessories

The cable entry plate is specifically developed for the PanelSeT S3D and PanelSeT CRNG enclosure families. It is designed as cable routing accessory and can be combined with other PanelSeT series components to ensure a consistent and professional installation. Mounting is done on the underside of the enclosure, secured via the designated mounting points in the enclosure. The plate is supplied as a set of 1 piece, with the packaging unit PCE (Piece) indicating individual packaging.

Installation and Mounting

Installation is performed by securing the plate to the underside of the control enclosure or distributor. The plate is inserted into the designated mounting openings and fastened using the existing mounting elements. Cable entries are created by piercing the membrane with a screwdriver, where the membrane automatically seals around the cable. The perforatable cutouts allow flexible adaptation to the specific number and position of cables. The cutout dimensions are 378 mm × 63 mm, providing sufficient space for multiple cables.

Operational Advantages

The flexible flange plate offers a simple and reliable solution for cable routing in the lower section of control enclosures. The combination of steel plate and HCE membrane ensures high mechanical stability and a tight seal. The perforatable membrane reduces installation time, as no pre-drilled holes are required. The epoxy-polyester powder coating provides high corrosion resistance, extending the plate’s service life. The plate is easy to handle and adapts flexibly to different installation scenarios.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/317993
qrcode für Schneider Electric NSYTLEME cable entry plate 445x130