| Complementary |
| Structure type | Panels and doors built into the structure; Formed from a single section; Perforated structure with a pitch of 25 mm; Vertical uprights joined with top and bottom frames |
| Door opening side | Left (120 °); Right (120 °) |
| Door type | Plain front |
| Mounting plate description | Without mounting plate |
| Type of gland plate | Without gland plate |
| Lock type | 4 points lock, handle with 5 mm double bar insert front right door |
| Number of doors | Front face: 2 door(s) |
| Accessibility for operation | Rear; Front; Sides of enclosure |
| Removable parts | Door by screws hinge; Mounting plate by screws mounting plate bracket; Rear panel by screws; Roof by screws; Mounting plate bracket by screws; Sliding rail by screws |
| Material | Frame: galvanised steel; Uprights: galvanised steel; Door: sheet steel; Panels: sheet steel; Hinge: zamak; Handle: polyamide 6 with 30 % fibre glass |
| Surface finish | Epoxy-polyester powder |
| Colour | Enclosure: white (RAL 9003); Handle: black (RAL 9005) |
| Net weight | 121.8 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 62208; IEC 61439-1; IEC 61439-2 |
| IP degree of protection | IP55 conforming to IEC 60529 |
| IK degree of protection | IK10 conforming to IEC 62262 |
| Logistical informations |
| Country of origin | FR |
| Main |
| Range | PrismaSeT |
| Extended range | PrismaSeT 6300 |
| Application | Multi-purpose; Low voltage electrical distribution |
| Product or component type | Suitable enclosure |
| Enclosure nominal height | 2000 mm |
| Enclosure nominal width | 1200 mm |
| Enclosure nominal depth | 800 mm |
| Enclosure mounting | Floor-standing |
| Device composition | 2 sliding rails; 4 mounting plate quick-fixing brackets; 1 structure; 1 rear panel; 1 roof; 2 door; 1 locking system with handle; 1 blocking system: left door |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 213.000 cm |
| Package 1 Width | 125.000 cm |
| Package 1 Length | 89.000 cm |
| Package 1 Weight | 141.700 kg |
Das PrismaSeT 6300 ist ein Standgehäuse aus dekarbonisiertem Stahl, das sich für die elektrische Niederspannungsverteilung eignet. Es enthält recycelten Stahl, der mit erneuerbarer Energie hergestellt wird, was zu einer erheblichen Reduzierung der CO2-Emissionen führt. Es hat eine Nennhöhe, -breite und -tiefe von 2000 mm, 1200 mm bzw. 800mm. Der Rahmen und die Stützen des Gehäuses sind aus verzinktem Stahl gefertigt, um eine lange Lebensdauer zu gewährleisten. Die Türen und Paneele sind aus Stahlblech gefertigt, während der Griff aus Polyamid 6 mit 30 % Glasfasern besteht. Eine Epoxid-Polyester-Pulverbeschichtung sorgt für ein ebenmäßiges Aussehen. Das Gehäuse ist weiß (RAL9003) und hat einen schwarzen (RAL 9005) Griff. zwei Einfache Türen, eine Rückwand, ein Dach, zwei Gleitschienen und ein Bausatz Schnellmontageplattenhalterungen. Die Türen haben einen Öffnungswinkel von bis zu 120 Grad. Die Haupttür verfügt über ein Vier-Punkt-Schloss mit einem Griff, der zur Sicherheit mit einem 5-mm-Doppelbart versehen ist, während die Nebentür über ein Riegelsystem mit einem Griff verfügt. Das Gehäuse hat die Schutzart IP55, d.h. es ist resistent gegen das Eindringen von Staub, Wasser und Öl. Das Gehäuse ist außerdem stoßfest und hat eine IK10-Einstufung. Die Bedienung ist durch den Zugang von hinten, vorne und von der Seite komfortabel.