| Complementary |
| Structure type | Formed from a single section; Perforated structure with a pitch of 25 mm; Panels and doors built into the structure; Vertical uprights joined with top and bottom frames |
| Door opening side | Reversible (120 °) |
| Door type | Glazed front |
| Mounting plate description | Without mounting plate |
| Type of gland plate | Without gland plate |
| Lock type | 4 points lock, handle with 5 mm double bar insert front door |
| Number of doors | Front: 1 door(s) |
| Accessibility for operation | Sides of enclosure; Rear; Front |
| Removable parts | Door by screws hinge; Rear panel by screws; Roof by screws; Mounting plate bracket by screws; Sliding rail by screws |
| Material | Frame: galvanised steel; Uprights: galvanised steel; Door: Securit glass; Door: sheet steel; Panels: sheet steel; Hinge: zamak; Handle: polyamide 6 with 30 % fibre glass |
| Surface finish | Epoxy-polyester powder |
| Colour | Enclosure: grey (RAL 7035); Handle: black (RAL 9005) |
| Net weight | 90.0 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 62208 |
| NEMA degree of protection | NEMA 3R/12 |
| IP degree of protection | IP55 conforming to IEC 60529 |
| IK degree of protection | IK08 conforming to IEC 62262 |
| Logistical informations |
| Country of origin | FR |
| Main |
| Range | PanelSeT |
| Extended range | PanelSeT SFN |
| Application | Multi-purpose |
| Product or component type | Suitable enclosure |
| Enclosure nominal height | 2000 mm |
| Enclosure nominal width | 1000 mm |
| Enclosure nominal depth | 600 mm |
| Enclosure mounting | Floor-standing |
| Device composition | 2 sliding rails; 4 mounting plate quick-fixing brackets; 1 structure; 1 door; 1 locking system with handle: door; 1 rear panel; 1 roof |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 213.000 cm |
| Package 1 Width | 105.000 cm |
| Package 1 Length | 69.000 cm |
| Package 1 Weight | 105.200 kg |
Dieses PanelSeT SFN ist ein Standgehäuse aus dekarbonisiertem Stahl, das für Mehrzweckanwendungen geeignet ist. Es enthält recycelten Stahl, der mit erneuerbarer Energie hergestellt wird, was zu einer erheblichen Reduzierung der CO2-Emissionen führt. Es hat eine Nennhöhe, -breite und -tiefe von 2000 mm, 1000 mm bzw. 600mm. Der Rahmen und die Stützen des Gehäuses sind aus verzinktem Stahl gefertigt, um eine lange Lebensdauer zu gewährleisten. Die Tür besteht aus Stahlblech und Sicherheitsglas, die Paneele aus Stahlblech und der Griff aus Polyamid 6 mit 30% Glasfaseranteil. Eine Epoxid-Polyester-Pulverbeschichtung sorgt für ein ebenmäßiges Aussehen. Das Gehäuse hat eine graue (RAL 7035) Farbe mit einem schwarzen (RAL 9005) Griff. eine verglaste Tür, eine Rückwand, ein Dach, zwei Gleitschienen und ein Bausatz Schnellmontageplattenhalterungen. Die Tür hat einen Öffnungswinkel von bis zu 120 Grad und ist reversibel, das heißt, sie kann von beiden Seiten geöffnet werden. Die Tür ist mit einem Vier-Punkt-Schloss und einem Griff mit 5-mm-Doppelbart versehen, der für Sicherheit sorgt. Das Gehäuse hat die Schutzart IP55, d.h. es ist resistent gegen das Eindringen von Staub, Wasser und Öl. Das Gehäuse ist mit einer IK08-Einstufung auch stoßfest. Die Bedienung ist durch den Zugang von hinten, vorne und von der Seite komfortabel.