| Complementary |
| Structure type | Vertical uprights joined with top and bottom frames; Panels and doors built into the structure; Perforated structure with a pitch of 25 mm; Formed from a single section |
| Door opening side | Left (120 °); Right (120 °) |
| Door type | Plain front |
| Mounting plate description | Plain |
| Type of gland plate | Without gland plate |
| Lock type | 4 points lock, handle with 5 mm double bar insert front right door |
| Number of doors | Front face: 2 door(s) |
| Accessibility for operation | Rear; Sides of enclosure; Front |
| Removable parts | Door by screws hinge; Mounting plate by screws mounting plate bracket; Rear panel by screws; Roof by screws; Mounting plate bracket by screws; Sliding rail by screws |
| Material | Frame: galvanised steel; Uprights: galvanised steel; Door: sheet steel; Panels: sheet steel; Hinge: zamak; Handle: polyamide 6 with 30 % fibre glass |
| Surface finish | Epoxy-polyester powder |
| Colour | Enclosure: grey (RAL 7035); Handle: black (RAL 9005) |
| Net weight | 110.3 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 62208; UL; CUL |
| NEMA degree of protection | NEMA 3R/12 |
| IP degree of protection | IP55 conforming to IEC 60529 |
| IK degree of protection | IK10 conforming to IEC 62262 |
| Main |
| Range | PanelSeT |
| Extended range | PanelSeT SFN |
| Application | Multi-purpose |
| Product or component type | Suitable enclosure |
| Enclosure nominal height | 1800 mm |
| Enclosure nominal width | 800 mm |
| Enclosure nominal depth | 600 mm |
| Enclosure mounting | Floor-standing |
| Device composition | 2 sliding rails; 4 mounting plate quick-fixing brackets; 1 structure: right door; 1 rear panel: right door; 1 roof; 1 mounting plate; 2 door; 1 locking system with handle; 1 locking bar system 4 points: right door; 1 locking bar system 2 points: left door |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 193.000 cm |
| Package 1 Width | 85.000 cm |
| Package 1 Length | 69.000 cm |
| Package 1 Weight | 123.700 kg |
The PanelSeT SFN from Schneider Electric is a floor-standing, two-door enclosure made of decarburized steel, designed for standard indoor applications. It features a modular design with a nominal height of 1800 mm, a width of 800 mm, and a depth of 600 mm. The construction is based on a vertical support frame to which upper and lower frames, as well as panels and doors, are attached. The structure is perforated with a pitch of 25 mm, enabling flexible mounting of components. The enclosure is designed as a single section, providing a compact yet expandable solution for industrial and technical installations.
Applications
This enclosure is suitable for multi-purpose indoor applications, particularly in industrial environments where a robust and flexible enclosure solution is required. The IP55 protection rating according to IEC 60529 ensures protection against dust and water jets, making it suitable for areas with increased contamination risk or occasional moisture. The IK10 rating according to IEC 62262 ensures high impact resistance, allowing the enclosure to be used in environments with mechanical stress. The NEMA 1, NEMA 3R, and NEMA 12 ratings further confirm its suitability for indoor use and areas with occasional dampness or splashing water.
Functions and Equipment in Detail
The enclosure features two simple front doors, each of which can be opened up to 120 degrees. The right door is equipped with a 4-point locking system, secured by a handle with a 5 mm double-rib insert for additional safety. The left door has a 2-point locking system. The doors are made of steel sheet and feature a black handle made of polyamide 6 with 30% glass fibers. The entire structure, including frames and supports, is made of galvanized steel, ensuring high corrosion resistance and long service life. The surface is coated with an epoxy-polyester powder coating, providing a uniform, gray (RAL 7035) appearance.
Technology Explained Simply
The modular design allows for flexible adaptation to different requirements. Integrated guide rails and quick-mounting brackets for mounting plates facilitate the installation of devices and components. Removable parts such as doors, rear panel, roof, and mounting plate holders are secured with screw fastenings, enabling easy maintenance and assembly. Accessibility is provided from the front, rear, and sides of the enclosure, simplifying operation and maintenance of installed components.
Compatibility and Accessories
The PanelSeT SFN is part of the PanelSeT product series and is compatible with the ClimaSys product family. It can be expanded with various accessories, including mounting frame sets, intermediate panels, rain roofs, cable entry plates, floor angles, and busbar chambers. These components allow for individual adaptation to specific requirements such as cable management, ventilation, or additional mounting surfaces.
Mounting and Installation
Installation is floor-standing. The structure is designed for easy assembly, with quick-mounting brackets and guide rails accelerating device installation. The use of screws for all removable parts ensures secure and stable fastening. Installation should be carried out by qualified personnel, as these are electrical devices and improper installation may lead to hazards.
Operational Advantages
The enclosure offers high mechanical stability and resistance to environmental influences. The IP55 and IK10 certifications ensure reliability in demanding environments. The modular design and integrated mounting aids reduce installation time and simplify maintenance. The use of recycled steel, produced using renewable energy, contributes to reducing CO2 emissions, highlighting the product's sustainability.