| Complementary |
| Structure type | Vertical uprights joined with top and bottom frames; Perforated structure with a pitch of 25 mm; Formed from a single section; Panels and doors built into the structure |
| Door type | Plain front |
| Number of doors | Front: 1 door(s) |
| Door opening side | Reversible (120 °) |
| Accessibility for operation | Rear; Front; Sides of enclosure |
| Removable parts | Door by screws hinge; Mounting plate by screws mounting plate bracket; Rear panel by screws; Roof by screws; Mounting plate bracket by screws; Sliding rail by screws |
| Device composition | 2 sliding rails; 4 mounting plate quick-fixing brackets; 1 structure; 1 door; 1 locking system with handle: door; 1 rear panel; 1 roof; 1 mounting plate |
| Colour | Enclosure: grey (RAL 7035); Handle: black (RAL 9005) |
| Material | Frame: galvanised steel; Uprights: galvanised steel; Door: sheet steel; Panels: sheet steel; Hinge: zamak; Handle: polyamide 6 with 30 % fibre glass |
| Surface finish | Epoxy-polyester powder |
| Mounting plate description | Plain |
| Type of gland plate | Without gland plate |
| Net weight | 51.0 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| NEMA degree of protection | NEMA 3R/12 |
| IK degree of protection | IK10 conforming to IEC 62262 |
| Logistical informations |
| Country of origin | FR |
| Main |
| Range | PanelSeT |
| Product name | PanelSeT SFN |
| Product or component type | Suitable enclosure |
| Enclosure mounting | Floor-standing |
| Device application | Multi-purpose |
| Height | 1400 mm |
| Width | 600 mm |
| Depth | 400 mm |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 153.000 cm |
| Package 1 Width | 75.000 cm |
| Package 1 Length | 49.000 cm |
| Package 1 Weight | 74.000 kg |
| Unit Type of Package 2 | PAL |
| Number of Units in Package 2 | 2 |
| Package 2 Height | 153.000 cm |
| Package 2 Width | 75.000 cm |
| Package 2 Length | 98.000 cm |
| Package 2 Weight | 148.000 kg |
Dieses PanelSeT SFN ist ein Standgehäuse aus dekarbonisiertem Stahl, das für Mehrzweckanwendungen geeignet ist. Es enthält recycelten Stahl, der mit erneuerbarer Energie hergestellt wird, was zu einer erheblichen Reduzierung der CO2-Emissionen führt. Es hat eine Nennhöhe, -breite und -tiefe von 1400 mm, 600 mm bzw. 400mm. Der Rahmen und die Stützen des Gehäuses sind aus verzinktem Stahl gefertigt, um eine lange Lebensdauer zu gewährleisten. Die Tür und die Paneele sind aus Stahlblech gefertigt, während der Griff aus Polyamid 6 mit 30 % Glasfasern besteht. Eine Epoxid-Polyester-Pulverbeschichtung sorgt für ein ebenmäßiges Aussehen. Das Gehäuse hat eine graue (RAL 7035) Farbe mit einem schwarzen (RAL 9005) Griff. Eine Einfache Tür, eine Rückwand, ein Dach, zwei Gleitschienen und ein Bausatz Schnellbefestigungshalterungen. Die Tür hat einen Öffnungswinkel von bis zu 120 Grad und ist reversibel, das heißt, sie kann von beiden Seiten geöffnet werden. Die Tür ist mit einem Vier-Punkt-Schloss und einem Griff mit 5-mm-Doppelbart versehen, der für Sicherheit sorgt. Das Gehäuse hat die Schutzart IP55, d.h. es ist resistent gegen das Eindringen von Staub, Wasser und Öl. Das Gehäuse ist außerdem stoßfest und hat eine IK10-Einstufung. Die Bedienung ist durch den Zugang von hinten, vorne und von der Seite komfortabel.