| Complementary |
| Material | Polyamide 6 with 30 % fibre glass |
| Colour | Grey (RAL 7035) |
| Fixing mode | Screwed - from the outside location |
| Permanent permissible load | 100 kg horizontal position; 200 kg vertical position |
| Height | 308 mm; 430 mm; 530 mm; 647 mm; 747 mm; 847 mm; 1056 mm |
| Width | 255 mm; 330 mm; 430 mm; 436 mm; 536 mm; 636 mm; 852 mm |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | ES |
| Main |
| Range | PanelSeT |
| Accessory / separate part category | Fixing accessory |
| Product or component type | Wall fixing support |
| Device application | Multi-purpose |
| Enclosure nominal dimensions | - |
| Mounting location | Top and bottom, on rear of the enclosure |
| Range compatibility | PanelSeT PLM PLM |
| Device composition | fixing screws; 4 lug |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 3.000 cm |
| Package 1 Width | 10.000 cm |
| Package 1 Length | 12.000 cm |
| Package 1 Weight | 226.000 g |
| Unit Type of Package 2 | CAR |
| Number of Units in Package 2 | 75 |
| Package 2 Height | 36.000 cm |
| Package 2 Width | 31.000 cm |
| Package 2 Length | 52.000 cm |
| Package 2 Weight | 17.000 kg |
| Unit Type of Package 3 | P12 |
| Number of Units in Package 3 | 900 |
| Package 3 Height | 85.000 cm |
| Package 3 Width | 80.000 cm |
| Package 3 Length | 120.000 cm |
| Package 3 Weight | 220.000 kg |
The wall mounting NSYPFPLMG from Schneider Electric belongs to the PanelSeT series and serves as mounting accessory for wall mounting of PanelSeT-PLM enclosures. It is specifically designed for secure and durable fixation of enclosures and cabinets in industrial applications. The bracket is mounted on the rear side of the enclosure and enables stable anchoring to walls or other load-bearing surfaces. The construction made of polyamide 6 with 30 % glass fibre offers high mechanical strength and resistance against mechanical stress as well as thermal influences. The colour is grey, corresponding to standard RAL 7035, enabling visual harmonisation with other PanelSeT components.
Applications
The wall mounting is intended for use in industrial environments where enclosures or electrical housings need to be mounted on walls. It is particularly suitable for applications in production plants, machine building, automation technology and other areas where firm and reliable mounting is required. The bracket is suitable for mounting on the top and bottom as well as on the rear side of the enclosure, enabling flexible adaptation to different mounting situations.
Functions and equipment in detail
The bracket features a robust construction with four eyelets designed for fixation with screws. Mounting is carried out from the outside, with the bracket directly attached to the rear side of the PanelSeT-PLM enclosure. The materials used ensure high strength and durability under industrial conditions. The bracket is designed for permanent loading: up to 200 kg in vertical position and up to 100 kg in horizontal position. These values are relevant for the secure fixation of heavy or bulky enclosures.
Technology explained clearly
The use of polyamide 6 with 30 % glass fibre ensures high mechanical stability and heat resistance. The material is resistant to wear, moisture and chemical influences, extending the service life of the bracket in industrial environments. The grey colour RAL 7035 is a standard in electrical and automation technology and ensures uniform visual design of installations. Fixation is achieved by screws, which are attached from the outside to the rear side of the enclosure, creating a stable connection.
Compatibility and accessories
The wall mounting is specifically developed for the PanelSeT-PLM enclosure family and is compatible with models PLM3025-108. Mounting is carried out directly on the rear side of the enclosure, with the bracket providing the necessary fixation points. It is an accessory designed to extend mounting options for PanelSeT enclosures. The bracket is not intended for other enclosure families or manufacturers.
Mounting and installation
Installation is performed by screwing the bracket onto the rear side of the PanelSeT-PLM enclosure. Mounting must be carried out from the outside, with the four eyelets of the bracket being fixed using suitable screws. The bracket is designed for permanent loading, so the screws and mounting materials must be selected according to the requirements.
Advantages in operation
The wall mounting provides a secure and stable fixation solution for PanelSeT-PLM enclosures. The high load capacity of 200 kg in vertical and 100 kg in horizontal position enables mounting of even heavy equipment. The material selection of polyamide 6 with glass fibre ensures long service life and resistance against industrial influences. The grey colour RAL 7035 supports visual integration into existing installations. Mounting is simple and carried out directly on the rear side of the enclosure, so no additional mounting aids are required. The bracket is designed for industrial environments and meets requirements for stability and reliability.
The packaging unit includes 4 pieces of the wall mounting. The exact dimensions of the bracket are not uniform but vary depending on the model; possible heights are 308 mm, 430 mm, 530 mm, 647 mm, 747 mm, 847 mm and 1056 mm, widths 255 mm, 330 mm, 430 mm, 436 mm, 536 mm, 636 mm and 852 mm. The exact dimensions depend on the specific application and the enclosure used. The warranty period is 18 months.
Mounting accessory,
PanelSeT,
Wall mounting,
Polyamide 6,
RAL 7035,
Glass fibre