Schneider Electric NSYMF54, EAN: 3606480183065

Schneider Electric NSYMF54 micro-perforated mounting plate H500xB400

Industrial Material > Enclosures / Chassis > System Accessories

Schneider Electric NSYMF54 micro-perforated mounting plate H500xB400

Lieske Part No. 1563877
Mfg Part No NSYMF54
EAN-Code 3606480183065
Manufacturer Schneider Electric
Here only 22,16 EUR
26,37 EUR incl. VAT

Further information for Schneider Electric NSYMF54 micro-perforated mounting plate H500xB400

Complementary
Fixing modeScrewed on backstuds - screw type M8; By fixing element
Permanent permissible load90 kg
Height465 mm
Width350 mm
Depth125 mm
thickness1.8 mm
Net weight2.4 kg
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originES
Main
RangePanelSeT
Accessory / separate part categoryMounting accessory
Product or component typeMounting plate
Device applicationMulti-purpose
Enclosure nominal dimensions- H: 500 mm W: 400 mm
Mounting locationStep slide; Direct fixing on backstuds
Mounting plate descriptionMicroperforated
Range compatibilityPanelSeT S3D; PanelSeT CRN; PanelSeT PLM PLM
Quantity per setSet of 1
MaterialGalvanised steel
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height0.300 cm
Package 1 Width35.000 cm
Package 1 Length47.000 cm
Package 1 Weight2.400 kg
Unit Type of Package 2P12
Number of Units in Package 2200
Package 2 Height43.000 cm
Package 2 Width80.000 cm
Package 2 Length120.000 cm
Package 2 Weight500.200 kg
The NSYMF54 is a micro-perforated mounting plate from the PanelSeT product range by Schneider Electric, designed for use in enclosures with nominal dimensions of height 500 mm and width 400 mm. It serves as a universal mounting surface for electrical components and devices within the PanelSeT product families CRN, S3D, S3X, and PLM. The plate is manufactured from galvanised steel, ensuring high mechanical stability and corrosion resistance. The micro-perforated surface, featuring holes of 3.6 mm diameter spaced at 12.5 mm intervals, allows for flexible and precise mounting access for various component sizes and arrangements.

Mounting accessories for enclosures
The mounting plate is designed for two mounting options: either directly to the rear panel studs using M8 screws, or to a step slider. This flexibility allows for adaptable installation depending on enclosure configuration and space requirements. The permissible continuous load is 90 kg, making the plate suitable for use with heavier devices and modules. The dimensions of the plate are 465 mm in height, 350 mm in width, and 125 mm in depth, with a material thickness of 1.8 mm. The product weight is 2.4 kg.

Functions and equipment in detail
The micro-perforated structure provides a high degree of mounting flexibility, as the holes are arranged at regular intervals, enabling a wide range of mounting points. This is particularly advantageous when installing devices with different mounting patterns. The use of galvanised steel ensures long service life and resistance to environmental influences such as moisture or minor corrosion. The plate is available as a single unit per pack and serves as a replacement or addition to existing enclosure configurations.

Technology explained simply
The term micro-perforated describes the fine hole structure, which enables precise and flexible mounting. The hole size of 3.6 mm and the repeating spacing of 12.5 mm correspond to a standard commonly used in industrial electrical engineering to ensure compatible mounting for standard components. Mounting to the rear panel studs is done using M8 screws, ensuring a secure and mechanically stable connection. The permissible load of 90 kg is sufficient for industrial use and covers the requirements for typical enclosure components.

Compatibility and accessories
The mounting plate is specifically developed for the PanelSeT product families CRN, S3D, S3X, and PLM. It matches the enclosure dimensions of 500 mm height and 400 mm width, making it a direct replacement or add-on module for existing systems. Compatibility with the mentioned product ranges ensures a consistent mounting and maintenance philosophy within the PanelSeT product line.

Mounting and installation
Installation is carried out either by direct fastening to the rear panel studs using M8 screws or via a step slider, depending on the enclosure configuration. The plate is inserted into the designated mounting points and secured with the appropriate screws. The installation requires no additional tools other than a screwdriver or a suitable wrench for the M8 screws. The specified dimensions and weight facilitate planning and integration into existing enclosure systems.

Advantages in operation
The micro-perforated mounting plate offers high flexibility in device arrangement, reduces mounting times through standardised hole patterns, and ensures stable fastening even under higher loads. The use of galvanised steel ensures long service life and low maintenance requirements. Compatibility with multiple PanelSeT product ranges increases reusability and reduces spare parts inventory.

Product type, core function, technology, standard
The NSYMF54 is a mounting accessory for enclosures, whose core function is the flexible and stable fastening of electrical components. The technology is based on a micro-perforated steel plate with a standardised hole pattern. Standardisation is achieved through compatibility with Schneider Electric’s PanelSeT systems, which are widely used in industrial electrical engineering. The material composition of galvanised steel meets the requirements for mechanical strength and corrosion protection in industrial environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1563877
qrcode für Schneider Electric NSYMF54 micro-perforated mounting plate H500xB400