Schneider Electric NSYCVF85M230PF, EAN: 3606480151200

Schneider Electric NSYCVF85M230PF fan 85 m³/h 230 V IP54

Industrial Material > Enclosures / Chassis > Rack-Climatization

Schneider Electric NSYCVF85M230PF fan 85 m³/h 230 V IP54

Lieske Part No. 1563234
Mfg Part No NSYCVF85M230PF
EAN-Code 3606480151200
Manufacturer Schneider Electric
Here only 82,60 EUR
98,29 EUR incl. VAT

Further information for Schneider Electric NSYCVF85M230PF fan 85 m³/h 230 V IP54

Complementary
Absorbed power15 W 60 Hz; 17 W 50 Hz
[In] rated current0.121 A 50 Hz; 0.097 A 60 Hz
Noise level < at46…49 dB
Bearing typeBall
HeightExternal: 170 mm
WidthExternal: 150 mm
DepthExternal : 62 mm
Cut-out dimensions125 x 125 mm
Net weight0.78 kg
MaterialOutlet grille: injected thermoplastic (ASA PC)
ColourOutlet grille: grey (RAL 7035)
Ambient air temperature for operation-20…60 °C
Ambient air temperature for storage-40…70 °C
Maximum pressure50 Pa flow rate 0 m³/h
Connections - terminalsFaston connector
IP degree of protectionIP54
Device composition1 axial motor; 2 protective grille: on the front and rear surfaces; 1 filter: front of axial motor; 1 outlet grille: front; 1 cut-out template; 1 power cord
Condition of useFlow rates depends on the work point, see ProClima software; Surrounding environment must be relatively clean; Filter must be cleaned and replaced regularly; Overfrequent filter replacement should be avoided; Outside temperature must be 5 °C lower than inside temperature
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originFR
Main
RangeClimaSys
Product nameClimaSys CV
Product or component typeFan
Type of filterStandard
Flow rateFree flow rate with standard filter: 85 m3/h at 50 Hz; Free flow rate with standard filter: 98 m3/h at 60 Hz
[Us] rated supply voltage175...253 V
Input voltage230 V 50/60 Hz
CertificationCSA
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height8.000 cm
Package 1 Width15.500 cm
Package 1 Length18.000 cm
Package 1 Weight930.000 g
Unit Type of Package 2CAR
Number of Units in Package 210
Package 2 Height21.000 cm
Package 2 Width33.000 cm
Package 2 Length43.000 cm
Package 2 Weight9.526 kg
Unit Type of Package 3P12
Number of Units in Package 3240
Package 3 Height95.000 cm
Package 3 Width80.000 cm
Package 3 Length120.000 cm
Package 3 Weight241.000 kg
The ClimaSys CV Axial-Motor Fan from Schneider Electric is a compact fan for climate control in enclosures. It provides controlled air circulation inside enclosures to regulate the operating temperature of electronic components and prevent overheating. The device is designed for use in industrial environments and features a protection rating of IP54, ensuring dust-tight and splash-proof conditions. The operating voltage is 230 V at 50/60 Hz, with the free airflow varying depending on frequency: 85 m³/h at 50 Hz and 98 m³/h at 60 Hz. The maximum airflow depends on the specific operating point and can be determined using the ProClima software. The fan is equipped with a standard filter that protects the air from coarse particles. The ambient temperature during operation ranges from -20 °C to 60 °C, while storage is possible from -40 °C to 70 °C. The maximum pressure difference is 50 Pa at a flow rate of 0 m³/h.

Applications

The fan is designed for use in enclosures, particularly in environments where continuous cooling is required to extend the lifespan of electronic components. It is suitable for industrial applications such as machine controls, automation systems, or distribution boxes. The device's operating temperature must be at least 5 °C below the internal temperature of the enclosure to ensure effective cooling. The environment should be relatively clean to extend filter life. Regular filter replacement is necessary, but overly frequent replacement should be avoided to minimize material wear.

Features and Equipment in Detail

The fan features an axial motor connected via a power supply cable with Faston connectors. The connection terminals allow for easy and secure connections. The device is equipped with two protective grilles—one on the front and one on the rear—to prevent mechanical damage. The outlet grille is made of injection-molded thermoplastic (ASA PC) and is gray in color (RAL 7035). The dimensions of the device are 170 mm (height) × 150 mm (width) × 62 mm (depth), with a required cutout in the enclosure of 125 mm × 125 mm. An integrated cutout template is included to facilitate installation. The device weighs 0.78 kg, making it easy to handle.

Technology Explained Simply

The fan operates on the principle of an axial fan, where air is moved parallel to the motor's axis. Air is drawn in by the motor, passed through the filter, and then directed into the enclosure via the outlet grille. The IP54 protection rating means the device is protected against dust and splashing water, making it suitable for outdoor or humid environments. The absorbed power is 17 W at 50 Hz and 15 W at 60 Hz, ensuring efficient power usage. The sound level ranges between 46 and 49 dB, which represents acceptable noise emissions for industrial applications. The bearings are ball bearings, ensuring long service life and low friction.

Compatibility and Accessories

The fan is compatible with various accessories that extend its functionality. These include connection cables (NSYCVAC200) for longer connection paths, stainless steel covers (NSYCAP125LXF) or Aluzinc covers (NSYCAP125LZF) for use in corrosive environments, as well as fine filters (NSYCAF125T) or filter inserts (NSYCAF125L55) for higher cleanliness requirements. Additionally, heaters such as the ClimaSys PTC resistance heater (NSYCR100WU2) are available to prevent condensation at low ambient temperatures. The use of thermostats (e.g., NSYCCOTHI) enables temperature-controlled operation to save energy.

Installation and Mounting

Installation is performed by fitting the fan into a cutout of 125 mm × 125 mm in the enclosure. The integrated cutout template facilitates precise execution. Mounting is done using screws, with the pre-drilled holes in the device supporting the installation. The connection terminals via the power supply cable allow for easy electrical connection. Installation should ensure unobstructed airflow and avoid blockages caused by other components.

Operational Advantages

The fan provides reliable cooling for enclosures with low energy consumption and acceptable noise levels. The integrated protective grilles and robust outlet grille enhance safety and service life. The IP54 protection rating allows use in demanding environments. Compatibility with various accessories enables adaptation to specific requirements, such as enhanced filtration performance or integrated temperature control. Easy installation and maintenance, thanks to the integrated cutout and filter cleaning, reduce maintenance effort.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1563234
qrcode für Schneider Electric NSYCVF85M230PF fan 85 m³/h 230 V IP54