| Complementary |
| Height | 780 mm |
| Width | 345 mm |
| Depth | 215 mm |
| [In] rated current | 2.3 A |
| Inrush current | 6 A |
| Power consumption in W | 480 W at 50/60 Hz, L35-L35; 540 W at 50/60 Hz, L35-L50 |
| Energy efficiency ratio | 2 |
| Control type | Electronic controller |
| Temperature setting range | 20…50 °C at 50/60 Hz |
| Ambient air temperature for operation | 20…50 °C at 50/60 Hz inside the enclosure: ; 5…55 °C at 50/60 Hz outside the enclosure: |
| Noise level | 76 dB |
| Pressure | 30 bar |
| Flow rate | Internal circuit: 330 m3/h at 50/60 Hz; External circuit: 450 m3/h at 50/60 Hz |
| Net weight | 22.4 kg |
| Cooling gas type | R513a (0.200 kg) |
| Type of filter | Optional external circuit filter |
| Recommended circuit breaker protection | M9F23116 |
| Thermal protection Recommended (fuse) | 15 A (T) |
| Material | Steel |
| Colour | Grey (RAL 7035) |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Product certifications | UL; IEC; EN |
| Directives | 2006/42/EC - machinery; 2014/30/EU - electromagnetic compatibility; 2011/65/EU - RoHS |
| Standards | EN/ISO 12100; EN 60335-1; EN 60335-2-40; EN 61000-3-2; EN 61000-3-3; EN 61000-6-2; EN 61000-6-3; EN/IEC 63000:2018; EN 14511 |
| IP degree of protection | IP55 conforming to IEC 60529 (on the internal circuit); IP24 conforming to IEC 60529 (on the external circuit) |
| Logistical informations |
| Country of origin | MT |
| Main |
| Range | ClimaSys |
| Product name | CU |
| mounting type | Side |
| Product or component type | Cooling unit |
| Installation | Indoor side |
| Product destination | For enclosure |
| Mounting mode | By screws |
| Supply Voltage | 220...240 V 1 phase 50 Hz EN/IEC; 230 V +/- 6 % 1 phase 60 Hz UL |
| Rated Power | 860 W |
| Cooling power | 860 W 50/60 Hz L35-L35; 710 W 50/60 Hz L35-L50 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 25.500 cm |
| Package 1 Width | 42.500 cm |
| Package 1 Length | 87.500 cm |
| Package 1 Weight | 24.400 kg |
| Unit Type of Package 2 | P12 |
| Number of Units in Package 2 | 7 |
| Package 2 Height | 101.900 cm |
| Package 2 Width | 80.000 cm |
| Package 2 Length | 120.000 cm |
| Package 2 Weight | 195.800 kg |
The Schneider Electric cooling unit NSYCU1KDG of the ClimaSys series is a side-mounted cooling unit for use in enclosures and electrical housings. It is specifically designed for automation and control systems as well as distribution enclosures in office and industrial buildings. The unit is mounted on the side of the enclosure and can be installed flush with the outer wall, half-flush inside the space, or top-mounted, depending on available space. It is made of steel and features an internal protection rating of
IP55, which is dust-tight and splash-proof, making it suitable for outdoor use. The external wiring has a protection rating of
IP24, providing protection against solid foreign objects and limited splashing water.
Applications
This cooling unit is designed for use in electrical enclosures to regulate internal temperature and ensure the functionality of sensitive electronic components. It is particularly suitable for applications in industrial automation, control and regulation systems, and distribution enclosures where constant cooling performance is required. The cooling capacity is
860 W at an indoor and outdoor air temperature of 35 °C (L35-L35) and
710 W at an outdoor air temperature of 50 °C (L35-L50), according to standard
EN 14511. The nominal capacity of the unit is 860 W, with power consumption of 480 W (at L35-L35) and 540 W (at L35-L50). Temperature control is electronic, allowing adjustment in the range of
20 to 50 °C. The operating ambient temperature is 20 to 50 °C inside the enclosure and 5 to 55 °C outside the enclosure.
Functions and Equipment in Detail
The cooling unit features
electronic control, enabling precise temperature regulation. The operating voltage is
220–240 V, 1 phase, 50 Hz (EN/IEC) or
230 V ±6 %, 1 phase, 60 Hz (UL). The rated current is 2.3 A, with an inrush current of 6 A. Cooling performance is achieved using refrigerant
R513a (0.200 kg), circulating in a closed loop. Airflow rate is
330 m³/h inside the enclosure and
450 m³/h outside. The sound level of the unit is
76 dB, representing an acoustically acceptable operating noise level. An optional external air circuit filter is available to improve air quality inside the enclosure.
Technology Explained Simply
The cooling unit operates on the principle of compressor cooling. Heat from the enclosure is extracted via a heat exchanger, where refrigerant R513a evaporates and is then condensed again in the condenser. The heat is dissipated into the ambient air. The electronic control continuously monitors the internal temperature and adjusts cooling performance accordingly. The integrated
Modbus interface enables networking with SCADA systems, allowing operational data, remote alarms, and status information to be transmitted. This supports predictive and proactive maintenance and reduces downtime. The energy efficiency ratio is 2, indicating efficient cooling performance.
Compatibility and Accessories
The cooling unit is compatible with various enclosure models, particularly Poly-wall enclosures of the NSYPLA series (e.g. NSYPLA1074G, NSYPLA1574G), stand enclosures of the NSYSFN series (e.g. NSYSFN20860, NSYSFN2012402DP), and high-performance enclosures such as NSYPHDZT1574P. Networked cooling units can be designed using the heat calculation tool
ProClima Web, with macros directly importable into CAD systems such as SEE Electrical from eTap. This simplifies planning and optimization of thermal management solutions.
Installation and Mounting
Mounting is done by screwing the unit to the side of the enclosure. The unit is designed for indoor operation and can be installed flush, half-flush, or top-mounted, depending on space conditions. Dimensions are
780 mm (height) × 345 mm (width) × 215 mm (depth). The product weight is 22.4 kg. For electrical protection, a fuse type
15 A (T) is recommended, along with a switch disconnector
M9F23116. Installation should be carried out by qualified personnel, observing electrical safety regulations (e.g. NFPA 70E, CSA Z462).
Operational Advantages
Networked control enables continuous monitoring of operating parameters and early detection of malfunctions. Integrated remote alarms and operational data reduce downtime and support efficient maintenance. Cooling performance ensures constant temperature inside the enclosure, extending the lifespan of electronic components. Compatibility with EcoStruxure apps and analytics enables data-driven process monitoring and optimized operations. Compliance with standards
EN/IEC 63000:2018,
EN 14511,
EN 60335-1,
EN 60335-2-40, and the Machinery Directive
2006/42/EC ensures safety and reliability of the unit.
The cooling unit is globally compliant with
IEC 14511 and
UL 60335-1 & UL 60335-2-40. Certifications include
UL,
IEC, and
EN, and the units also meet the requirements of the
RoHS Directive 2011/65/EU. The warranty period is 18 months.