Schneider Electric NSYCR100WU2C, EAN: 3606480152320

Schneider Electric NSYCR100WU2C isolated heater PTC 100 W

Industrial Material > Enclosures / Chassis > Rack-Climatization

Schneider Electric NSYCR100WU2C isolated heater PTC 100 W

Lieske Part No. 837348
Mfg Part No NSYCR100WU2C
EAN-Code 3606480152320
Manufacturer Schneider Electric
Here only 70,22 EUR
83,56 EUR incl. VAT

Further information for Schneider Electric NSYCR100WU2C isolated heater PTC 100 W

Complementary
Operating positionVertical
Ambient air temperature for operation-40…70 °C
IP degree of protectionIP20
Electrical insulation classClass II
Product certificationsUL; VDE
MaterialBody: extruded aluminium; Cover: plastic
HeightExternal: 150 mm
WidthExternal: 60 mm
DepthExternal : 90 mm
Condition of useElectrical protection is needed; Heaters must be installed with a thermal controller; Air sealed enclosure
fixing modeBy clips
Mounting support35 mm DIN rail
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originDE
Main
RangeClimaSys
Product nameClimaSys CR
Product or component typeResistance heater
Power range100 W
Input voltage120...240 V AC 50/60 Hz
Electrical connection4 screw terminals 2.5 mm²
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height7.000 cm
Package 1 Width10.000 cm
Package 1 Length12.000 cm
Package 1 Weight356.000 g
Unit Type of Package 2CAR
Number of Units in Package 250
Package 2 Height28.000 cm
Package 2 Width40.500 cm
Package 2 Length60.000 cm
Package 2 Weight17.800 kg
Unit Type of Package 3P12
Number of Units in Package 3300
Package 3 Height68.000 cm
Package 3 Width80.000 cm
Package 3 Length120.000 cm
Package 3 Weight188.000 kg
The Schneider Electric ClimaSys CR heating element, type NSYCR100WU2C, is a PTC heating element with a rated power of 100 W, specifically developed for climate control in enclosures and electrical housings. The device serves temperature regulation inside enclosures to ensure sufficient operating temperature for sensitive electronic components at low ambient temperatures. The heater is designed for use in industrial and technical installations where reliable and controlled heat supply is required.

Applications
The heater is designed for operation in environments where the temperature ranges from -40 °C to 70 °C. It is particularly suitable for enclosures installed in climatically adverse conditions, such as outdoors or in cold production halls. The insulation class II and protection rating IP20 ensure safe operation indoors, with the IP20 protection rating safeguarding against contact with moving parts and against solid foreign objects larger than 12.5 mm. The heater is designed for vertical operating position, which must be considered during installation in enclosures.

Functions and Equipment in Detail
The heater features a PTC resistor, providing self-regulating heating performance. As temperature increases, the power output automatically decreases, preventing overheating and increasing service life. Electrical connection is made via 4 screw terminals with a cross-section of up to 2.5 mm², enabling a secure and stable connection. Mounting is done on a 35 mm DIN rail, which is standard in the electrical industry and ensures quick and secure installation. The housing is made of extruded aluminium, offering high thermal conductivity and mechanical stability.

Technology Explained Simply
The PTC technology (Positive Temperature Coefficient) ensures that the resistance increases with rising temperature, automatically reducing heating power. This prevents overload and ensures even heat output. The heater is insulated, meaning it does not require additional earthing, as insulation class II already provides double or reinforced insulation. The operating voltage is in the range of 120 to 240 V AC at 50/60 Hz, enabling universal use in various countries. The device dimensions are 150 mm (height), 60 mm (width), and 90 mm (depth), representing a compact design.

Compatibility and Accessories
The heater is intended for use in combination with a thermostat, as electrical protection is required. Using a thermostat, such as model NSYCCOTHI, enables precise temperature control. Additionally, other components of the ClimaSys series, such as fans (e.g. NSYCVF85M230PF) or filterstat controllers (e.g. NSYCCOFST90250V), can be combined to create a complete climate control system. The heater is designed for installation in air-tight enclosures, ensuring efficient heat output.

Mounting and Installation
Mounting is done via the integrated 35 mm DIN rail, which is standard in most enclosures. Fixing is done using clips, enabling quick and secure installation. The heater must be connected to a thermostat to ensure automatic control of heating power. Electrical connection is made via the 4 screw terminals, designed for a cross-section of 2.5 mm². Installation should be carried out in accordance with the relevant standards and safety regulations.

Operational Advantages
The PTC heater provides reliable and energy-efficient heat supply that automatically adapts to ambient temperature. The insulation class II reduces the need for additional protective measures, and the IP20 protection rating ensures safe operation indoors. The compact design and DIN rail mounting simplify installation and integration into existing enclosure configurations. The heater is designed for long service life and requires minimal maintenance when correctly installed and operated.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/837348
qrcode für Schneider Electric NSYCR100WU2C isolated heater PTC 100 W