Complementary
Communication interface	Modbus between sensor and controller
Rated voltage	90…240 V AC 50/60 Hz
Display type	OLED screen
Display resolution	128 x 64 pixels
Type of alarms	Overtemperature; Dust filter alarm; Fan lack of energy; Fan rpm slow; Fan flaps blocked; Over-temperature alarm; Lifetime over; Δt deviation; Remote device broken
Number of port	4 port(s) for input signal
Input voltage	15.5 V DC 150 mA
Control button type	4 push-button
Local signalling	Channel status (busy with communication): 4 green/orange LEDs by blinking; Channel status (problem with the channel when connector is plugged): without light indicator
Integrated connection type	1 relay 5 A (potential free digital output alarm indication
Analogue output range	0...10 V reporting the worst filter status level on joined panels
Mounting support	35 mm DIN rail; Cross rails; Enclosure door
Quantity per set	1
Width	External: 80 mm
Height	External: 80 mm
Depth	External : 49.75 mm
Product certifications	CE; EAC
Directives	89/336/EEC - electromagnetic compatibility
Contractual warranty
Warranty (in months)	18
Logistical informations
Country of origin	ES
Main
Range	ClimaSys
Product name	ClimaSys CC
Product or component type	Controller
Range compatibility	Spacial; PanelSeT
Device application	To monitor ventilation and filtering reliability by controlling dust/fan sensors; To view alarms and key value statistics of each sensor(fans and installed grids); To change settings according to sensor type
Device connection	Dust sensor; Fan sensor; Hub
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	7.500 cm
Package 1 Width	9.000 cm
Package 1 Length	9.000 cm
Package 1 Weight	200.000 g
Unit Type of Package 2	CAR
Number of Units in Package 2	50
Package 2 Height	32.000 cm
Package 2 Width	26.000 cm
Package 2 Length	46.000 cm
Package 2 Weight	10.730 kg

CSVS filter controller (90-250V, AC, 50/60Hz). 4 connections for sensors and thermal hubs (for network expansion to up to 256 sensors). Potential-free relay contact 5A SPST For implementing alarms in the event of overheating, completely dirty filters, defective or worn fans and other events. Analogue contact (V+ V-) 0 -10V, signal shows the degree of contamination of the filter from 0 -100%. Dimensions 80x80x41mm. Operating temperature -40 - +70°C. Shows all data relevant for maintenance directly in the display on the control cabinet, or can be linked to a PLC, for example, to provide data for remote maintenance. For mounting on a top hat rail (7.5mm). For mounting in sheet metal (cutout in doors, side or rear walls), an installation frame (IP55) must also be ordered.