| Complementary |
| Type of measurement | Fan speed range measurement range: 80...5800 rpm; Fan current range measurement range: 40...1500 mA: through toroidal clamp (no need to disconnect the fan for sensor installation); Fan current range measurement range: 40...1500 mA: snap on-off system; RPM: transported air across roof blades or lateral fans; Temperature: transported air across roof blades or lateral fans |
| Mounting location | Behind fan |
| Mounting mode | By clips |
| Communication interface | Modbus between sensor and controller |
| Connections - terminals | Mini connector Modbus (4 wires) |
| Local signalling | Fault indication: 1 red LED by blinking; Bad position: 1 red LED by blinking; Sensor position: 1 green LED by flashing |
| Material | Injected thermoplastic (PC) |
| Quantity per set | Set of 1 |
| Height | 61.9 mm |
| Width | 48.6 mm |
| Depth | 15.2 mm |
| Colour | Transparent green (Pantone 355C) |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Product certifications | CE; EAC; EMC directive 89/336 EEC |
| Logistical informations |
| Country of origin | ES |
| Main |
| Range | ClimaSys |
| Product name | ClimaSys CC |
| Product or component type | RPM and temperature sensor |
| Product compatibility | ClimaSys DG 230/400 V AC fan 115 V; ClimaSys CV 230/400 V AC standard fan 115 V; ClimaSys CV grille adapted to integrate dust sensor |
| Sensor type | RPM reader by infrared light sensor; Small toroidal for current consumption |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 3.000 cm |
| Package 1 Width | 10.500 cm |
| Package 1 Length | 15.000 cm |
| Package 1 Weight | 130.000 g |
| Unit Type of Package 2 | CAR |
| Number of Units in Package 2 | 55 |
| Package 2 Height | 24.500 cm |
| Package 2 Width | 34.000 cm |
| Package 2 Length | 42.500 cm |
| Package 2 Weight | 7.670 kg |
CSVS fan sensor (for installation on the internal fan grille). Optical speed measurement (revolutions per minute); for retrofit solutions, adhesive dots are also required for attachment to the fan blades. Determination of the current power consumption of the fan (mA). Determination of the temperature of the air being conveyed. Compatible with intake fans, roof fans and circulation fans (recirculation fans).