Spacelogic KNX IP interface DIN rail. The Spacelogic KNX IP interface is an interface between IP and KNX. You can access the KNX bus from any point on your LAN. The Spacelogic KNX IP interface can be used as a programming interface for the ETS 5 software and enables access to the KNX bus over the Internet using a VPN. The device supports KNX Security, which can be activated in the ETS. With its interface functionality (tunneling), KNX Security prevents unauthorized access. The device supports up to 8 tunneling channels. A separate individual address must be configured for each tunneling channel. With 2 integrated push buttons for selecting the tunnel channel and 3 status LEDs. The interface is powered via the KNX bus. An additional power supply is not required. For mounting on TH35 top hat rails according to EN 60715. The bus is connected via a bus connection terminal. The connection to the LAN network is via the RJ45 socket. Device width - 1 module approx. 18 mm. Note - This application requires ETS 5 or higher. Contents - With bus connection terminal and cable cover.