Schneider Electric KNX. For connecting devices with a 0-10 V interface to KNX. With integrated bus coupler and screw terminals (230 V) or pluggable screw terminals (0-10 V). The corresponding 230 V switching output can be operated manually using a hand switch. For mounting on TH35 top hat rails in accordance with EN 60715. The bus connection is made via a bus connection terminal, a data rail is not required. Switching contact: for switching the electronic ballasts/transformers. Nominal voltage: AC 230 V, 50-60 Hz Nominal current: 16 A, cos Phi 0.6 Switching capacity: AC 230 V, 3600 W, cos Phi 1 Capacitive load: AC 230 V, 16 A, 200 uF Incandescent lamps: AC 230 V, max 3600 W. Halogen lamps: AC 230 V, max 2500 W Fluorescent lamps: AC 230 V, max 3600 VA, uncompensated AC 230 V, max 2500 VA, parallel compensated LV halogen lamps with wound transformer: max 2000 VA 0-10v. Interface: 0.12-100 mA Voltage range: DC 0-10 V Device width: 2.5 HP corresponds to approx. 45 mm Scope of delivery: With bus connection terminal and cable cover.