| Complementary |
| Maximum mechanical speed | 6000 rpm |
| [Us] rated supply voltage | 115...480 V |
| Network number of phases | Three phase |
| Continuous stall current | 3.15 A |
| Continuous stall torque | 3.4 N.m, 115...480 V, three phase |
| Continuous power | 1520 W |
| Peak stall torque | 10.8 N.m, 115...480 V, three phase |
| Nominal output power | 0.35 W, 115 V; 0.67 W, 230 V; 1.26 W, 400 V; 1.52 W, 480 V |
| Nominal torque | 3.3 N.m for LXM52 at 3.07 mA, 115 V, three phase; 3.2 N.m for LXM52 at 2.99 mA, 230 V, single phase; 3 N.m for LXM52 at 2.83 mA, 400 V, three phase; 2.9 N.m for LXM52 at 2.75 mA, 480 V, three phase; 3.3 N.m for LXM62 at 3.07 mA, 115 V, single phase; 3.2 N.m for LXM62 at 2.99 mA, 230 V, single phase; 3 N.m for LXM62 at 2.83 mA, 400 V, three phase; 2.9 N.m for LXM62 at 2.75 mA, 480 V, three phase |
| Nominal speed | 1000 rpm for LXM52 at 3.07 mA, 115 V, single phase; 2000 rpm for LXM52 at 2.99 mA, 230 V, single phase; 4000 rpm for LXM52 at 2.83 mA, 400 V, three phase; 5000 rpm for LXM52 at 2.75 mA, 480 V, three phase; 1000 rpm for LXM62 at 3.07 mA, 115 V, single phase; 2000 rpm for LXM62 at 2.99 mA, 230 V, single phase; 4000 rpm for LXM62 at 2.83 mA, 400 V, three phase; 5000 rpm for LXM62 at 2.75 mA, 480 V, three phase |
| Maximum current Irms | 11.2 A |
| Shaft end | Smooth shaft |
| Second shaft | Without second shaft end |
| Shaft diameter | 19 mm |
| Shaft length | 40 mm |
| IP degree of protection | IP65 standard |
| Encoder type | Multiturn SinCos Hiperface |
| Speed feedback resolution | 128 periods |
| Holding brake | Without |
| Mounting support | International standard flange |
| Motor flange size | 100 mm |
| Electrical connection | Rotatable right-angled connectors |
| Torque constant | 1.08 N.m/A at 120 °C |
| Back emf constant | 70.3 V/krpm |
| Number of motor poles | 5.0 |
| Rotor inertia | 3.19 kg.cm² |
| Stator resistance | 4.12 Ohm |
| Stator inductance | 14.9 mH |
| Stator electrical time constant | 4.5 ms |
| Maximum radial force Fr | 900 N at 1000 rpm; 720 N at 2000 rpm; 630 N at 3000 rpm; 570 N at 4000 rpm; 530 N at 5000 rpm |
| Type of cooling | Natural convection |
| Length | 128.6 mm |
| Centring collar diameter | 95 mm |
| Centring collar depth | 3.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 9 mm |
| Circle diameter of the mounting holes | 115 mm |
| Net weight | 3.34 kg |
| Sizing reference | MH31001P |
| Temperature copper hot | 135 °C |
| Number of motor stacks | 1 |
| Output current 3s peak | 11.2 A |
| Inertia | 0.0 kg.cm² of brake; 3.19 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Range compatibility | PacDrive 3 |
| Device short name | MH3 |
| Product or component type | Servo motor |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 15.6 cm |
| Package 1 Width | 22.1 cm |
| Package 1 Length | 44.6 cm |
| Package 1 Weight | 4.04 kg |
Lexium MH3 servo motors deliver unrivalled power density to meet most compact machine requirements. With four flange sizes and three different lengths, they offer a solution for most applications and cover a torque range from 1.4 to 65 Nm at a maximum speed of up to 6000 rpm. They allow robust adjustment of the control parameters, simplifying installation and adjustment. Lexium MH3 servo motors are Recognized certified and comply with UL1004 standards and European directives ( marking). They are available in the following variants: 4 flange sizes: 70, 100, 140 and 190 mm. Enclosure protection class: IP 65 for the shaft end according to IEC/EN 60529 (IP 67 with optional conformity kit). IP 65 for the housing (IP 67 with optional conformity kit). With or without holding brake. Angle connector for power and encoder connection. Integrated single-turn or multi-turn SinCos Hiperface encoder. Smooth shaft end or shaft end with key.