Complementary
Power quality analysis	conforming to EN 50160: 2010 compliance report; conforming to IEEE 519: 2014 compliance report; conforming to IEC 61000-4-30: class S power quality measurement; up to the 63rd harmonic; harmonic distortion; waveform capture; voltage sag and swell detection; programmablity (logic and math functions); conforming to IEC 62586 power quality monitoring; disturbance direction detection; rapid voltage change
Device application	WAGES metering; Power monitoring
Type of measurement	Current; Voltage; Frequency; Active and reactive power total; Apparent power total; Power factor total; Active and reactive power per phase, rms; Apparent power per phase, rms; Power factor per phase, rms
supply voltage	90...415 V AC 45...65 Hz +/- 10 %; 110...415 V DC +/- 10 %
Network frequency	50 Hz; 60 Hz
[In] rated current	10 A; 5 A; 1 A
Poles description	3P; 1P + N; 3P + N
Power consumption in VA	16 VA at 230 V AC
Display type	Remote LCD display
Display resolution	320 x 240 pixels QVGA
Sampling rate	256 samples/cycle
Measurement current	50…10000 mA
Analogue input type	Voltage (impedance 5 MOhm); Current (impedance 0.3 mOhm)
Measurement voltage	57…400 V AC 42...69 Hz between phase and neutral; 100…690 V AC 42...69 Hz between phases
Frequency measurement range	42…69 Hz
Number of inputs	3 digital 30 V AC; 3 digital 60 V DC
Measurement accuracy	Current +/- 0.1 %; Voltage +/- 0.1 %; Active energy +/- 0.2 %
Accuracy class	Class 0.2S active energy conforming to IEC 62053-22; Class 0.2 active energy conforming to ANSI C12.20; Class 0.2 active power conforming to IEC 61557-12; Class 0.5S reactive energy conforming to IEC 62053-24; Class 0.5 power factor conforming to IEC 61557-12; Class 0.2 voltage conforming to IEC 61557-12; Class 0.2 current conforming to IEC 61557-12
Number of outputs	1 pulse
Information displayed	Voltage; Current; Frequency; Power; Energy consumption; Harmonic distortion
Communication port protocol	Modbus RTU at 115 kbauds - 2-wire; ION at 115 kbauds - 2-wire; DNP3; IEC 61850; Modbus TCP/IP; Ethernet Modbus TCP/IP daisy chain at 10/100 Mbit/s; RSTP 801.1d 2004
Communication port support	ETHERNET; Screw terminal block: RS485
Communication network type	IPv6 (internet protocol)
Data recording	Sequence of event recording; Event logs; Min/max of instantaneous values; Harmonics logs; Alarm logs; GPS synchronisation; Waveform logs; Data logs; Time stamping; Trending/forecasting; Sag and swell logs; 50 data recorders
Memory capacity	512 MB
Web services	Customizable home page; File upload/download via FTP; File upload/download via SFTP; Web server; Alarm notification by e-mail; Viewing of captured waveform (FTP); Viewing of captured waveform (web); HTTPS server
Communication service	SMTP e-mail notification; RSTP support; NTP time synchronization; DHCP; PTP time synchronization
Cybersecurity	Password protection; Syslog protocol support; Port hardening; Robust security logs; Enable/disable communication ports
Mounting mode	Flush-mounted; Clip-on
Mounting support	DIN rail meter device; Framework remote display
Provided equipment	Remote display
Installation category	III
Safety Construction	III400…690 V conforming to IEC 61010-1:ed. 3; III400…690 V conforming to EN 61010-1:ed. 3; III347…600 V conforming to UL 61010-1:ed. 3; III347…600 V conforming to CSA C22.2 No 61010-1:ed. 3
Standards	IEC 62053-22; IEC 62053-24; IEC 62052-11; IEC 61557-12; IEEE 1588; IEC 62586-2; IEC 61326-1
Product certifications	CE; CULus; N998
Width	90.5 mm
Depth	90.8 mm
Height	90.5 mm
Net weight	528 g
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP30 conforming to IEC 60529
Relative humidity	5…95 %
Ambient air temperature for operation	-25…70 °C
Ambient air temperature for storage	-40…85 °C
Operating altitude	3000 m
Compatibility code	PM8244
Logistical informations
Country of origin	CA
Main
Range	PowerLogic
Product name	PowerLogic PM8000
Product or component type	Power meter
Device short name	PM8244
model type	Standard
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	13.800 cm
Package 1 Width	14.000 cm
Package 1 Length	36.800 cm
Package 1 Weight	1.305 kg
Unit Type of Package 2	S03
Number of Units in Package 2	4
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	6.212 kg
Unit Type of Package 3	P12
Number of Units in Package 3	32
Package 3 Height	45.000 cm
Package 3 Width	80.000 cm
Package 3 Length	120.000 cm
Package 3 Weight	61.696 kg

The PowerLogic PM8244 is a DIN rail power analyzer for low and medium voltage applications with a remote display for front mounting 96 x 96 mm and AC/DC control voltage. It is designed to ensure the availability and efficiency of your energy-critical systems. It creates energy transparency and provides actionable data on complex power quality conditions. The modular, flexible and powerful ION technology allows individual applications to be created for each measuring device. It has high accuracy, multiple communication ports, a web-based user interface and a graphical color display. This power analyzer also has integrated power quality analysis and patented fault direction detection. Certified by independent laboratories for Class 0.2S accuracy for active energy (IEC62052-11, IEC62053-24, IEC62053-22). Also certified for power quality (IEC62586-2, IEC61000-4-30 Class S). Cybersecurity features include secure protocols (HTTPs, sFTP, Secure ION), security event logging, Syslog protocol. Ability to enable/disable communication ports and support for 50 configurable user accounts to manage access. With 512MB memory for up to 50 data logs (800 channels), 50+ user-definable alarms, waveform recordings up to 256 samples/cycle, 1/2 cycle root mean square (RMS) logging. Memory can also be used for custom web pages, min/max logs, energy trends and run hours. Time stamping for events with +/-1ms accuracy using time synchronization. Time synchronization methods that include PTP (IEEE1588), NTP, IRIG-B, GPS ASCII (RS485) and network time setting function. 3 digital inputs and one digital output, plus the ability to add up to 4 option modules. The input/output option modules include 2 relays and 6 digital inputs or 2 analog outputs and 4 analog inputs. Wide control voltage range of 90-415 VAC / 110-415 VDC. Operating environment from -25 to +70°C, humidity from 5% to 95% and operating altitude up to 3000 m.