Complementary
Power quality analysis	up to the 15th harmonic
Device application	Power monitoring
Type of measurement	Current; Voltage; Frequency; Power factor; Energy; Active and reactive power
[Us] rated supply voltage	90...450 V AC 45...65 Hz; 100...300 V DC
Network frequency	50 Hz; 60 Hz
[In] rated current	5 A; 1 A
type of network	3P; 1P + N; 3P + N
Maximum power consumption in VA	11 VA at 415 V
Ride-through time	80 ms 120 V AC typical; 100 ms 230 V AC typical; 100 ms 415 V AC typical
Display type	Monochrome graphic LCD
Display resolution	128 x 128 pixels
Sampling rate	64 samples/cycle
Measurement current	50…8500 mA
Analogue input type	Voltage (impedance 5 MOhm); Current (impedance
Measurement voltage	35…760 V AC 45...65 Hz between phases; 20…440 V AC 45...65 Hz between phase and neutral
Frequency measurement range	45…65 Hz
Number of inputs	0
Measurement accuracy	Active energy +/- 0.5 %; Reactive energy +/- 2 %; Active power +/- 0.5 %; Apparent power +/- 0.5 %; Frequency +/- 0.05 %; Power factor +/- 0.5; Current +/- 0.5 %; Voltage +/- 0.5 %; Apparent energy +/- 0.5 %; Reactive power +/- 2 %
Accuracy class	Class 0.5S active energy conforming to IEC 62053-22
Number of outputs	1 digital
Communication port protocol	Modbus RTU and ASCII at 9.6, 19.2 and 38.4 kbauds even/odd or none - 2 wires, insulation 2500 V; JBUS
Communication port support	RS485
Data recording	Time stamping; Min/max of instantaneous values
Connections - terminals	Voltage circuit: screw terminal block4; Control circuit: screw terminal block2; Current transformer: screw terminal block6; Input/output circuit: screw terminal block6; RS485 link: screw terminal block4
Mounting mode	Flush-mounted
Mounting support	Framework
Standards	IEC 61557-12:2015; EN 50470-1; UL 61010-1; IEC 62053-24; IEC 60529; EN 50470-3; IEC 62053-22:2020; IEC 62053-23:2020; IEC 62052-11:2020; IEC 62052-31:2015
Product certifications	CE conforming to IEC 61010-1; CULus conforming to UL 61010-1; MID conforming to EN 50470-1; MID conforming to EN 50470-3
Width	96 mm
Depth	72 mm
Height	96 mm
Net weight	380 g
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP54 display: conforming to IEC 60529; IP30 rear: conforming to IEC 60529
Relative humidity	5…95 % at 50 °C non-condensing
Pollution degree	2
Ambient air temperature for operation	-25…70 °C meter; -20…70 °C display; -25…-20 °C (with reduced performance) display
Ambient air temperature for storage	-40…85 °C
Operating altitude	2000 m CAT III; 3000 m CAT II
Logistical informations
Country of origin	IN
Main
Range	PowerLogic
Product name	PowerLogic PM5000
Product or component type	Power meter
Device short name	PM5111
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	11.500 cm
Package 1 Width	12.600 cm
Package 1 Length	12.600 cm
Package 1 Weight	486.000 g
Unit Type of Package 2	S03
Number of Units in Package 2	12
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	6.430 kg
Unit Type of Package 3	P06
Number of Units in Package 3	96
Package 3 Height	75.000 cm
Package 3 Width	60.000 cm
Package 3 Length	80.000 cm
Package 3 Weight	61.820 kg

The PowerLogic PM5111 is a universal meter for front mounting (96 mm x 96 mm) with a fully graphic and backlit LCD display and has an additional MID certification. The meter offers an accuracy of class 0.5s according to the IEC 62053-22 standard and 64 samples per cycle. The meter measures energy, active and reactive power, voltage, current, frequency, power factor and up to the 15th harmonic. With 4 quadrant energy measurement. The device works in a 50 Hz or 60 Hz network and accepts a supply voltage of 100 to 415 VAC and 125 to 250 VDC. The rated current of this meter is 1 A or 5 A and supports configurations with one phase and neutral, three phases or three phases and neutral. The measuring voltage range between phases is 35 to 690 VAC at 47 to 63 Hz. The measuring range between phase and neutral is 20 to 400 VAC at 45 to 65 Hz. The communication protocol is Modbus RTU and ASCII 2 wires with interface RS485 support. The meter also has a digital pulse output and 33 configurable alarms. The product dimensions are as follows: width 96 millimeters, depth 72 millimeters, height 96 millimeters and product weight 380 g.