Additional features
Power quality analysis	Complies with EN 50160: 2010 conformity report; complies with IEEE 519: 2014 conformity report; complies with IEC 61000-4-30: Class S power quality measurement; up to the 63rd harmonic; harmonic distortion; waveform capture; detection of voltage sags and overvoltages; programmability (logical and mathematical functions); complies with IEC 62586 power quality monitoring; complies with IEC 61000-4-15 disturbance direction detection; rapid voltage change
Device application	Sales invoicing; data aggregation; power monitoring; S0 pulse capture for measurement of water, air, gas, electricity, steam
Measured value type	current; voltage; frequency; total active and reactive power; total apparent power; total power factor; active and reactive power per phase, RMS; apparent power per phase, RMS; power factor per phase, RMS; active and reactive energy; apparent energy
Supply voltage	90 - 415 V AC 45 - 65 Hz ± 10 %; 110 - 415 V DC ± 10 %
Network frequency	50 Hz; 60 Hz
[In] Rated current	1 A; 5 A; 10 A
Pole description	3P + N; 3P; 1P + N
Power consumption in VA	18 VA at 415 V AC
Display type	Without display
Scanning interval	256 samples/cycle
Measurement current	50…10000 mA
Analogue input type	Voltage (impedance 5 MOhm); current (impedance 0.3 mOhm)
Measuring voltage	57…400 V AC 42 - 69 Hz between phase and neutral; 100…690 V AC 42 - 69 Hz between phases
Measuring range for frequency	42…69 Hz
Number of inputs	3 digital 30 V AC; 3 digital 60 V DC
Accuracy of measurement	Current ± 0.1 %; Voltage ± 0.1 %; Active energy ± 0.2 %
Accuracy class	Class 0.2S active energy corresponds to IEC 62053-22; Class 0.2 active energy corresponds to ANSI C12.20; Class 0.2 active power corresponds to IEC 61557-12; Class 0.5S reactive energy corresponds to IEC 62053-24; Class 0.5 power factor corresponds to IEC 61557-12; Class 0.2 voltage corresponds to IEC 61557-12; Class 0.2 current corresponds to IEC 61557-12; Class 0.2 frequency corresponds to IEC 61557-12; Class 0.2 active energy corresponds to IEC 61557-12
Number of outputs	1 impulse
Displayed information	Voltage; current; frequency; power; energy consumption; harmonic distortion
Communications protocol	Modbus RTU at 115 kBaud - 2-wire; ION at 115 kBaud - 2-wire; DNP3; IEC 61850; Modbus TCP/IP; Ethernet Modbus TCP/IP daisy chain at 10/100 Mbit/s; RSTP 801.1d 2004; DLMS
Support for communication interfaces	Ethernet; Screw terminal block: RS485; Mini-B-USB: USB
Communication network type	IPv6 (Internet protocol)
Data logging	Timestamping; Trend curves/forecasts; Waveform logs; Event sequence recording; Minimum/maximum values of real-time values; Harmonic logs; Data logs; Voltage sag and overvoltage recording; GPS synchronization; Event recording; Alarm logs; 50 data loggers
Memory capacity	512 MB
Web services	Customizable homepage; uploading/downloading files via FTP; uploading/downloading files via SFTP; web server; alarm notification by email; display of captured waveform (FTP); display of captured waveform (web); HTTPS server
Communication service	E-mail notification via SMTP; NTP time synchronization; RSTP support; DHCP; PTP time synchronization
Cybersecurity	Enable/disable communication ports; Hardening; Syslog protocol support; Password protection; Robust security protocols
Mounting mode	Plug-in
Mounting bracket	DIN rail
Installation type	Indoor installation
Installation category	III
Safety design	III400…690 V complies with IEC 61010-1:Ed. 3; III400…690 V complies with EN 61010-1:Ed. 3; III347…600 V complies with UL 61010-1:Ed. 3; III347…600 V complies with CSA C22.2 No. 61010-1:Ed. 3
Standards	IEC 62052-11; IEC 61557-12; IEC 62053-22; IEC 62053-24; IEC 61326-1; IEEE 1588; IEC 62586
Product certifications	CE; CULus; N998
Width	90,5 mm
Depth	90,8 mm
Height	90,5 mm
Product weight	528 g
Contractual warranty
Warranty (in months)	18
Main features
Product series	PowerLogic
Product name	PowerLogic ION7400
Product or component type	Power meter
Device short name	ION7403
Model type	Standard
Mounting
Degree of protection (IP)	IP30 corresponds to IEC 60529
Relative humidity	5…95 %
Operating ambient temperature	-25…70 °C
Ambient temperature during storage	-40…85 °C
Operating altitude	3.000 m
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	14,0 cm
VPE 1 width	14,0 cm
VPE 1 length	18,5 cm
Packaging weight (Lbs)	1,03 kg

ION7400 series power analyzer for front installation in low and medium voltage applications without display. Installation on DIN rail, accuracy class 0.2S. 4-quadrant measurement, import and export for active and reactive energy, active, reactive, apparent energy meters per phase and separate active energy meters with tariff selection via weekly timer, communication or contact. Current, voltage (average and per phase), current average, active, reactive, apparent power, power factor (total and per phase), power averages. Frequency, min and max values of the instantaneous values, max values of the current and power averages. Harmonic content THD I, THD U and TDD, harmonic analysis - measured values per phase with bar chart up to the 127th via software. Harmonic on the device display, up to the 63rd. Threshold monitoring and alarm: self-learning threshold with alarm via display or communication. 50 data recorders with 16 channels each for recording true RMS values (minute, second or 10ms values), event recorder with time stamp in milliseconds. Extended fault recorder function for network oscilloscope in the event of an event with up to 256 samples/period. for various trigger events via EcoStruxure Power Monitoring Expert with recording duration over 210 periods or > 4s with high sampling. High memory depth with 512 MB. Note: the accessories of the PM8000 are used as I/O modules, display and spare parts for ION7400.