Schneider Electric M9F44108, EAN: 3606481169433

Schneider Electric M9F44108 circuit breaker 1-pole 8A

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric M9F44108 circuit breaker 1-pole 8A

Lieske Part No. 1862805
Mfg Part No M9F44108
EAN-Code 3606481169433
Manufacturer Schneider Electric
Here only 44,93 EUR
53,47 EUR incl. VAT

Further information for Schneider Electric M9F44108 circuit breaker 1-pole 8A

Complementary
[Ue] rated operational voltage240 V AC 50/60 Hz; 415 V AC 50/60 Hz; 60 V DC
Magnetic tripping limit3 x In +/- 20 % AC; 4.2 x In +/- 20 % DC
[Ics] rated service breaking capacity2.25 kA 75 % conforming to EN/IEC 60947-2 - 415 V AC; 7.5 kA 75 % conforming to EN/IEC 60947-2 - 240 V AC; 2.25 kA 75 % conforming to GB/T 14048.2 - 415 V AC; 7.5 kA 75 % conforming to GB/T 14048.2 - 240 V AC; 15 kA 75 % conforming to GB/T 14048.2 - 60 V DC; 15 kA 75 % conforming to EN/IEC 60947-2 - 60 V DC
[Ui] rated insulation voltage500 V AC conforming to EN/IEC 60947-2
[Uimp] rated impulse withstand voltage6 kV conforming to EN/IEC 60947-2
Suitability for isolationYes conforming to EN/IEC 60947-2
Control typeToggle
Local signallingON/OFF indication
Mounting modeClip-on
Mounting supportDIN rail
9 mm pitches2
Height103 mm
Width18 mm
Depth72 mm
ColourGrey
Mechanical durability20000 cycles
Electrical durability10000 cycles
Provision for padlockingPadlockable
Connections - terminalsTunnel type terminal (top or bottom)1…25 mm² (18 AWG...8 AWG) - rigid; Tunnel type terminal (top or bottom)1…16 mm² (18 AWG...8 AWG) - flexible with ferrule; Tunnel type terminal (top or bottom)1…16 mm² (18 AWG...8 AWG) - flexible
Wire stripping length14 mm for top or bottom connection
Tightening torque2.5 N.m top or bottom
Earth-leakage protectionWithout
Contact position indicatorYes
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20 conforming to IEC 60529; IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3 conforming to EN/IEC 60947-2
Tropicalisation2 conforming to IEC 60068-1
Relative humidity95 % at 55 °C
Operating altitude0...2000 m
Ambient air temperature for operation-30…70 °C
Ambient air temperature for storage-40…80 °C
Logistical informations
Country of originFR
Main
RangeMulti9
Product nameMulti9 C60
Product or component typeMiniature circuit-breaker
Device short nameC60BP
Device applicationDistribution
Poles description1P
Number of protected poles1
[In] rated current8 A at 25 °C conforming to EN/IEC 60947-2
Network typeAC; DC
Trip unit technologyThermal-magnetic
Curve codeZ
StandardsEN/IEC 60947-2; GB/T 14048.2; UL 489; CSA C22.2 No 5
Product certificationsIEC; CCC; CSA; UL
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height7.500 cm
Package 1 Width1.800 cm
Package 1 Length10.300 cm
Package 1 Weight119.000 g
Unit Type of Package 2BB1
Number of Units in Package 212
Package 2 Height8.300 cm
Package 2 Width10.800 cm
Package 2 Length22.000 cm
Package 2 Weight1.487 kg
Unit Type of Package 3S03
Number of Units in Package 3108
Package 3 Height30.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight13.870 kg
Circuit breaker N40N Multi 9 OEM, 10 kA. 3-pole+N, nominal current 20A, C characteristic, operating voltage (Ue) 415 V, insulation voltage (Ui) 240V-415V AC. Single connection terminal for cable and pin comb bar on the top and bottom of the device. Fastened using a normal clip fastener on a DIN rail. Snap action for low-wear switching of the contacts. Additional auxiliary modules that can be connected in series (optional) - display of switch position (OF), fault tripping (SD), shunt release (MX, MX+OF), undervoltage release (MN, MNs, MNx). Tool-free installation on the left side of the device. The N40N circuit breaker complies with the following standards - IEC/EN 60947-2.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1862805
qrcode für Schneider Electric M9F44108 circuit breaker 1-pole 8A