Schneider Electric M9F21216, EAN: 3606481167750

Schneider Electric M9F21216 circuit breaker 2-pole 16A

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric M9F21216 circuit breaker 2-pole 16A

Lieske Part No. 1769136
Mfg Part No M9F21216
EAN-Code 3606481167750
Manufacturer Schneider Electric
Here only 48,26 EUR
57,43 EUR incl. VAT

Further information for Schneider Electric M9F21216 circuit breaker 2-pole 16A

Complementary
[Ue] rated operational voltage240 V AC 50/60 Hz; 415 V AC 50/60 Hz; 440 V AC 50/60 Hz
Magnetic tripping limit4 x In +/- 20 % AC; 5.7 x In +/- 20 % DC
[Ics] rated service breaking capacity4.5 kA 75 % conforming to EN/IEC 60947-2 - 440 V AC; 7.5 kA 75 % conforming to EN/IEC 60947-2 - 415 V AC; 15 kA 75 % conforming to EN/IEC 60947-2 - 240 V AC; 4.5 kA 75 % conforming to GB/T 14048.2 - 440 V AC; 7.5 kA 75 % conforming to GB/T 14048.2 - 415 V AC; 15 kA 75 % conforming to GB/T 14048.2 - 240 V AC
[Ui] rated insulation voltage500 V AC conforming to EN/IEC 60947-2
[Uimp] rated impulse withstand voltage6 kV conforming to EN/IEC 60947-2
Suitability for isolationYes conforming to EN/IEC 60947-2
Control typeToggle
Local signallingON/OFF indication
Mounting modeClip-on
Mounting supportDIN rail
9 mm pitches4
Height81 mm
Width36 mm
Depth72 mm
ColourGrey
Mechanical durability20000 cycles
Electrical durability10000 cycles
Provision for padlockingPadlockable
Connections - terminalsTunnel type terminal (top or bottom)1…25 mm² (18 AWG...8 AWG) - rigid; Tunnel type terminal (top or bottom)1…16 mm² (18 AWG...8 AWG) - flexible with ferrule; Tunnel type terminal (top or bottom)1…16 mm² (18 AWG...8 AWG) - flexible
Wire stripping length14 mm for top or bottom connection
Tightening torque2.5 N.m top or bottom
Earth-leakage protectionWithout
Contact position indicatorYes
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20 conforming to IEC 60529; IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3 conforming to EN/IEC 60947-2
Tropicalisation2 conforming to IEC 60068-1
Relative humidity95 % at 55 °C
Operating altitude0...2000 m
Ambient air temperature for operation-30…70 °C
Ambient air temperature for storage-40…80 °C
Logistical informations
Country of originFR
Main
RangeMulti9
Product nameMulti9 C60
Product or component typeMiniature circuit-breaker
Device short nameC60SP
Device applicationDistribution
Poles description2P
Number of protected poles2
[In] rated current16 A at 25 °C conforming to EN/IEC 60947-2
Network typeAC; DC
Trip unit technologyThermal-magnetic
Curve codeB
StandardsEN/IEC 60947-2; GB/T 14048.2; UL 1077; CSA C22.2 No 235
Product certificationsIEC; CCC; UR; CSA
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height7.500 cm
Package 1 Width3.600 cm
Package 1 Length8.500 cm
Package 1 Weight227.000 g
Unit Type of Package 2BB1
Number of Units in Package 26
Package 2 Height8.000 cm
Package 2 Width9.000 cm
Package 2 Length22.500 cm
Package 2 Weight1.402 kg
Unit Type of Package 3S03
Number of Units in Package 372
Package 3 Height30.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight17.395 kg
The M9F21216 circuit breaker from the Multi 9 series by Schneider Electric is a two-pole (2P) switch with a rated current of 16 A at 25 °C, specified according to EN/IEC 60947-2. It is designed for the distribution and protection of electrical circuits in installations and is suitable for use in alternating and direct current networks. The tripping technology is based on a thermomagnetic principle, where the B characteristic (B curve) ensures selective disconnection in case of overload and short circuit. The magnetic tripping threshold is 4 times the rated current (In) for alternating voltage and 5.7 times In for direct voltage, enabling reliable response to sudden current surges.

Applications

The switch is designed for use in distribution systems, particularly in industrial, commercial, and residential buildings, where safe power distribution and protection functions are required. It is rated for operating voltages of 240 V, 415 V, and 440 V AC and complies with international standards such as EN/IEC 60947-2, UL 1077, and CSA C22.2 No 235. The rated insulation voltage is 500 V AC, ensuring safe insulation even at higher voltages. The rated impulse withstand voltage of 6 kV protects the device against transient voltage surges.

Functions and Equipment in Detail

The switch features a contact position indicator that visually signals the ON/OFF state. Operation is performed via a toggle switch, enabling simple handling. Mounting is tool-free on a DIN rail, with the device secured using a clip fastening. Connections are made via tunnel terminals on the top and bottom of the device, suitable for cable cross-sections of 1 to 25 mm² (solid) and 1 to 16 mm² (flexible, with or without wire end ferrule). The wire stripping length is 14 mm, and the required tightening torque is 2.5 Nm.

Technology Explained Simply

The thermomagnetic tripping technology combines a thermal and a magnetic tripping mechanism: the thermal part responds to prolonged overloads, while the magnetic part rapidly disconnects in case of sudden short circuits. The snap-action switching ensures wear-free switching of contacts, increasing the service life. The mechanical life is 20,000 cycles, and the electrical life is 10,000 cycles. The device is designed for operating temperatures from -30 °C to 70 °C and can be used up to an altitude of 2,000 m above sea level. Storage is possible from -40 °C to 80 °C.

Compatibility and Accessories

The switch is modular and can be extended with various auxiliary modules that can be mounted on the DIN rail. These include auxiliary contacts (e.g. M9A26917, M9A26914), load current release units (e.g. M9A26946, M9A26476), under-voltage release units (e.g. M9A27108, M9A27107), and residual current circuit breakers (e.g. M9R11225, M9R81225). These modules allow for functional extensions, such as signaling switching states, monitoring load current, or protection against under-voltage. Locking elements (e.g. MGN26380, MGN26381) and rotary operating handles (e.g. 27048) can also be combined to enhance safety and operability.

Mounting and Installation

Mounting is done on a DIN rail using a clip fastening, enabling tool-free and quick installation. The device is intended for mounting in enclosures or distributors and complies with protection class IP20 (IEC 60529), while modular enclosures allow for IP40. The pollution degree is 3, permitting use in environments with increased pollution risk. Drip-proofing is specified at level 2 according to IEC 60068-1.

Operational Advantages

The switch offers high reliability through thermomagnetic tripping technology and snap-action switching. Modular expandability allows adaptation to specific requirements without changing the base device. Tool-free mounting and clear indication of switching position simplify installation and maintenance. Compliance with international standards (IEC, UL, CSA, GB) enables worldwide use in various markets. The locking function supports safety during maintenance work.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1769136
qrcode für Schneider Electric M9F21216 circuit breaker 2-pole 16A