Schneider Electric M9D11606, EAN: 3606480883040

Schneider Electric M9D11606 circuit breaker 1-pole+N 6A

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric M9D11606 circuit breaker 1-pole+N 6A

Lieske Part No. 1864089
Mfg Part No M9D11606
EAN-Code 3606480883040
Manufacturer Schneider Electric
Here only 166,72 EUR
198,40 EUR incl. VAT

Further information for Schneider Electric M9D11606 circuit breaker 1-pole+N 6A

Complementary
Network frequency50 Hz
[Ue] rated operational voltage240 V AC 50 Hz
Magnetic tripping limit8.5 x In +/- 20 % AC
Residual current tripping technologyVoltage independent
[Ics] rated service breaking capacity4.5 kA 75 % conforming to EN/IEC 60947-2 - 240 V AC 50 Hz
[Ui] rated insulation voltage400 V AC 50 Hz conforming to EN/IEC 60947-2
[Uimp] rated impulse withstand voltage4 kV conforming to EN/IEC 60947-2
Surge current250 A
Control typeToggle
Local signallingON/OFF indication; Fault indication
Mounting modeClip-on
Mounting supportDIN rail
Connection pitch9 mm between phase and neutral
9 mm pitches4
Height81 mm
Width36 mm
Depth70 mm
Net weight0.125 kg
ColourGrey
Mechanical durability20000 cycles
Electrical durability20000 cycles
Provision for padlockingPadlockable
Connections - terminalsTunnel type terminal (top or bottom)0.75…16 mm² - rigid; Tunnel type terminal (top or bottom)0.33…10 mm² - flexible; Tunnel type terminal (top or bottom)0.33…10 mm² - flexible with ferrule
Wire stripping length13 mm for top or bottom connection
Tightening torque2 N.m top or bottom
Earth-leakage protectionIntegrated
Contact position indicatorYes
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20 conforming to IEC 60529; IP40 (modular enclosure) conforming to IEC 60529
Pollution degree3 conforming to EN/IEC 60947-2
Overvoltage categoryIV
Electromagnetic compatibility8/20 µs impulse withstand, 250 A
Tropicalisation2 conforming to IEC 60068-1
Relative humidity95 % at 55 °C
Ambient air temperature for operation-5…60 °C
Ambient air temperature for storage-30…70 °C
Logistical informations
Country of originES
Main
RangeMulti9
Product nameMulti9 N40 Vigi
Product or component typeResidual current breaker with overcurrent protection (RCBO)
Device short nameN40 Vigi
Device applicationDistribution
Poles description1P + N
Neutral positionLeft
Number of protected poles1
[In] rated current6 A at 50 °C conforming to EN/IEC 60947-2
Network typeAC
Trip unit technologyThermal-magnetic
Curve codeC
Earth-leakage sensitivity30 mA
Earth-leakage protection time delayInstantaneous
Earth-leakage protection classType AC
Breaking capacity6 kA Icu at 240 V AC 50 Hz conforming to EN/IEC 60947-2
Utilisation categoryCategory A conforming to EN/IEC 60947-2
Suitability for isolationYes conforming to EN/IEC 60947-2
StandardsEN/IEC 60947-2
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height4.000 cm
Package 1 Width8.200 cm
Package 1 Length11.000 cm
Package 1 Weight201.000 g
Unit Type of Package 2S03
Number of Units in Package 254
Package 2 Height30.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight11.261 kg
FI/LS switch Multi 9 OEM, N40 Vigi, 6kA (IEC/EN 61009-1). 1-pole+N, nominal current 6A, C characteristic, nominal residual current 30 mA, operating voltage (Ue) 240V AC, insulation voltage (Ui) 400V AC. Fastened using a normal clip fastener on a DIN rail. Snap action for low-wear switching of the contacts. Test button - for regular function testing. FI/LS switch N40 Vigi for protecting people in the event of direct contact, systems against fire hazards, overloads and short circuits and for switching and disconnecting circuits. Technology of the trip unit - thermomagnetic. Additional auxiliary modules that can be connected in series (optional) - display of switch position (OF), fault tripping (SD), shunt release (MX, MX+OF), undervoltage release (MN, MNs, MNx). Tool-free installation on the left side of the device. The N40 Vigi complies with the following standards - IEC/EN 61009-1.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1864089
qrcode für Schneider Electric M9D11606 circuit breaker 1-pole+N 6A