Complementary
Range compatibility	Multi9 C60BP; Multi9 C60BPR; Multi9 C60SP; Multi9 GFP; Multi9 C60H-DC
[Ui] rated insulation voltage	500 V
[Uimp] rated impulse withstand voltage	4 kV
Mounting mode	Fixed
Mounting support	DIN rail
Comb busbar and distribution block compatibility	Top: YES
Height	85 mm
Width	9 mm
Depth	73.5 mm
Net weight	30 g
Connections - terminals	Clamp terminal (bottom): 1 cable(s) 2.5 mm² (14 AWG) - rigid; Clamp terminal (bottom): 2 cable(s) 1.5 mm² (16 AWG) - rigid
Wire stripping length	9 mm for bottom connection
Tightening torque	1 N.m bottom
Contractual warranty
Warranty (in months)	18
Environment
Ambient air temperature for operation	-25…50 °C
Ambient air temperature for storage	-40…85 °C
Logistical informations
Country of origin	BE
Main
range of product	Multi9
Product or component type	Fault contact
Device short name	SD
Signal contacts composition	1 C/O
[In] rated current	3 A at 415 V, AC 50/60 Hz; 6 A at
[Uc] control circuit voltage	240...415 V AC 50/60 Hz; 24...130 V DC
9 mm pitches	1
Standards	EN/IEC 60947-5-1; EN 62019-2
Product certifications	CSA; PCT; UL; UR; CCC
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	2.1 cm
Package 1 Width	8 cm
Package 1 Length	9.4 cm
Package 1 Weight	39 g
Unit Type of Package 2	BB1
Number of Units in Package 2	12
Package 2 Height	8.7 cm
Package 2 Width	10 cm
Package 2 Length	26.5 cm
Package 2 Weight	526 g
Unit Type of Package 3	S03
Number of Units in Package 3	108
Package 3 Height	30 cm
Package 3 Width	30 cm
Package 3 Length	40 cm
Package 3 Weight	5.101 kg

Fault indication switch SD Multi 9 OEM. Operating voltage (Ue) 240-415V AC / 24-130V DC, width 9mm, 1 changeover contact. Changeover contact to indicate the position of the associated device in the event of an electrical fault or activation of the additional equipment for tripping. With test function on the front. For remote indication of a fault tripping of the associated device. Not compatible with a residual current circuit breaker GFP UL 1053, use an SD+OF in the SD position. The fault indication/auxiliary switch OF+SD/OF meets the following standards - IEC/EN 60947-5-1, EN 62019-2.