This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the OPEN or CLOSED position of the circuit breaker. Operating current is between 2mA and 100mA at a frequency of 50Hz to 60Hz at 24VAC to 240VAC &, 24VDC to 220VDC. Open / Closed, auxiliary contact. It has 1 position switch with 1 changeover type contacts. Intended for industrial and OEM installations. This electrical accessory is compatible with the Multi9 ranges such as C60BP, C60SP, C60 and N40. The OF is used for either the device abbreviation or the compatibility code. Screw terminal connection on the bottom. The connection allows rigid copper cables with a cable cross section of 2.5mm². Screw terminal connection on the bottom. The connection allows flexible copper cables. The cable cross section 2 cables allows a cable cross section of 1.5mm². Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross section 2 cables allows a cable cross section of 2.5mm². The Ui rated insulation voltage is up to 500V. The rated impulse voltage Uimp is 4kV. It can be mounted on a DIN rail for modular installation. The width in 9mm pitch is 1. The dimensions are (W) 9mm x (H) 85mm x (D) 68mm. The color of the product is white. The product weight is 29g. The pollution degree is 3. The tropicalization degree is treatment 2. The stripping length is 9mm. The tightening torque for the connection is 1N.m (bottom) for the screwdriver type PZ1. The IP protection class is IP20. The operating temperature is between -25°C and +70°C. The storage temperature is from -40°C to +85°C. This product complies with EN/IEC 60947-5-1, EN/IEC 60947-5-4, GB/T 14048.5, GB/T 14048.17, UL 1077, UL 489, CSA C22.2 No 0-10, CSA C22.2 No 5-13, CSA C22.2 No 235-04 and CSA C22.2 No 65-03. It has EAC and CCC quality labels and is certified with CE, UKCA, UL and CSA certificates.