This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the OPEN or CLOSED position of the circuit breaker. Operating current is 6A from 24VAC to 240VAC, 3A from 277VAC and 415VAC at a frequency of 50Hz to 60Hz. Operating current of 6A is at 24VDC, 2A at 48VDC, 1.5A at 60VDC, 1A at 110VDC and 130VDC. It has 1 position switch with 1 changeover type contacts. Intended for industrial and OEM installations. This electrical accessory is compatible with the Multi9 ranges such as C60BP, C60SP, C60 and N40. The OF is used for either the device short name or the compatibility code. Screw terminal connection on the bottom. The connector allows rigid copper cables with a cable cross section of 2.5mm². Screw terminal connection on the bottom. The connector allows flexible copper cables. The cable cross section 2 cables allows a cable cross section of 1.5mm². The Ui rated insulation voltage is up to 500V. The rated impulse voltage Uimp is 4kV. It can be mounted on a DIN rail for modular installation. The width in 9mm pitch is 1. The dimensions are (W) 9mm x (H) 85mm x (D) 68mm. The color of the product is white. The product weight is 30g. The pollution degree is 3. The tropicalization degree is treatment 2. The stripping length is 9mm. The tightening torque for the connector is 1N.m (bottom) for the screwdriver type PZ1. The IP protection class is IP20. The operating temperature is between -25°C and +70°C. The storage temperature is from -40°C to +85°C. This product complies with EN/IEC 60947-5-1, GB/T 14048.5, GB/T 14048.17, UL 1077, UL 489, CSA C22.2 No 0-10, CSA C22.2 No 5-13, CSA C22.2 No 235-04 and CSA C22.2 No 65-03. It has EAC and CCC quality marks and is certified with CE, UKCA, UL and CSA certificates.