Schneider Electric LXM32SD18N4, EAN: 3606480694769

Schneider Electric LXM32SD18N4 servo drive 3-phase 208/480V 1.8kW

Industrial Material > Engines and accessories

Schneider Electric LXM32SD18N4 servo drive 3-phase 208/480V 1.8kW

Lieske Part No. 1131584
Mfg Part No LXM32SD18N4
EAN-Code 3606480694769
Manufacturer Schneider Electric
Here only 1.747,48 EUR
2.079,50 EUR incl. VAT

Further information for Schneider Electric LXM32SD18N4 servo drive 3-phase 208/480V 1.8kW

Complementary
Switching frequency8 kHz
Overvoltage categoryIII
Maximum leakage current30 mA
Electrical isolationBetween power and control
Type of cableSingle-strand IEC cable (temperature: 50 °C) copper 90 °C XLPE/EPR
Electrical connectionTerminal, clamping capacity: 3 mm², 12 AWG (CN8)
Tightening torqueCN8: 0.5 N.m
Discrete input number2 capture discrete input(s)
Discrete input typeCapture (CAP terminals)
Sampling duration0.25 ms
Discrete input voltage24 V DC for capture
Discrete input logicPositive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
Discrete output number3
Discrete output typeLogic output(s) (DO)24 V DC
Discrete output logicPositive or negative (DO) conforming to EN/IEC 61131-2
Braking current50 mA
Response time on output250 µs (DO) for discrete output(s)
Safety functionSTO (safe torque off), integrated
Safety levelSIL 3 conforming to EN/IEC 61508
Communication interfaceSERCOS III, integrated
Status LED1 LED (red) servo drive voltage
Signalling functionDisplay of faults 7 segments
MarkingCE
Operating positionVertical +/- 10 degree
Product compatibilityServo motor BMH (100 mm, 1 motor stacks)
Width68 mm
Height270 mm
Depth237 mm
Net weight2.1 kg
Contractual warranty
Warranty (in months)18
Environment
Electromagnetic compatibilityConducted EMC conforming to EN 55011 class A group 1
StandardsEN/IEC 61800-3
Product certificationsCSA
IP degree of protectionIP20 conforming to EN/IEC 60529
Vibration resistance1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
Shock resistance15 gn for 11 ms conforming to EN/IEC 60028-2-27
Pollution degree2 conforming to EN/IEC 61800-5-1
Environmental characteristicClasses 3C1 conforming to IEC 60721-3-3
Relative humidityClass 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3
Ambient air temperature for operation0…50 °C conforming to UL
Ambient air temperature for storage-25…70 °C
Type of coolingIntegrated fan
Logistical informations
Country of originID
Main
Range of productLexium 32
Device short nameLXM32S
Product or component typeMotion servo drive
Format of the driveBook
Network number of phasesThree phase
[Us] rated supply voltage200...240 V - 15...10 %; 380...480 V - 15...10 %
Supply voltage limits170…264 V; 323…528 V
Supply frequency50/60 Hz - 5...5 %
Network frequency47.5...63 Hz
EMC filterIntegrated
Continuous output current6 A at 8 kHz
Output current 3s peak18 A at 208 V for 5 s; 18 A at 480 V for 5 s
Continuous power1700 W at 208 V; 3300 W at 400 V; 3300 W at 480 V
Nominal power1.2 kW at 208 V 8 kHz; 1.8 kW at 400 V 8 kHz; 1.8 kW at 480 V 8 kHz
Line current6 A 78 % at 208 V, with external line choke of 1 mH; 6.9 A 90 % at 400 V, with external line choke of 1 mH; 6 A 98 % at 480 V, with external line choke of 1 mH; 6.2 A 140 % at 208 V, without line choke; 5.2 A 161 % at 400 V, without line choke; 4.5 A 165 % at 480 V, without line choke
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height10.600 cm
Package 1 Width27.500 cm
Package 1 Length33.000 cm
Package 1 Weight2.663 kg
Unit Type of Package 2S03
Number of Units in Package 22
Package 2 Height30.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight5.974 kg
Unit Type of Package 3P06
Number of Units in Package 316
Package 3 Height75.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight54.800 kg
LXM32 servo amplifier from the Lexium 32 servo drive series. This single-channel servo amplifier was designed to improve the performance of the machine through optimized motor control and to simplify installation thanks to its compact book-style design. This Sercos series includes the fieldbus connection to motion controllers via Sercos III networks and is characterized by the 2 expansion slots for selectable encoder and safety modules. Operating modes such as homing, manual travel, speed, position and current control are available. STO is integrated as a safety function and further functions can be provided via the optional eSM card. The supply is provided by a three-phase connection to networks with 200-240/380-480 VAC. A level C3 EMC line filter is installed. A continuous current of 6 A and a peak current of up to 18 A are available for controlling a servo motor, which means an output of up to 1.8 kW (voltage dependent). In conjunction with the BSH and BMH series servo motors, the motion servo controller operates optimally. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impacts and circular attributes that support your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1131584
qrcode für Schneider Electric LXM32SD18N4 servo drive 3-phase 208/480V 1.8kW