| Complementary |
| Switching frequency | 8 kHz |
| Overvoltage category | III |
| Maximum leakage current | 30 mA |
| Electrical isolation | Between power and control |
| Type of cable | Single-strand IEC cable (temperature: 50 °C) copper 90 °C XLPE/EPR |
| Electrical connection | Terminal, clamping capacity: 3 mm², 12 AWG (CN8); Terminal, clamping capacity: 5 mm², 10 AWG (CN1); Terminal, clamping capacity: 5 mm², 10 AWG (CN10) |
| Tightening torque | CN8: 0.5 N.m; CN1: 0.7 N.m; CN10: 0.7 N.m |
| Discrete input number | 2 capture discrete input(s); 2 safety discrete input(s); 4 logic discrete input(s) |
| Discrete input type | Capture (CAP terminals); Logic (DI terminals); Safety (compliment of STO_A, compliment of STO_B terminals) |
| Sampling duration | DI: 0.25 ms discrete; 0.25 ms |
| Discrete input voltage | 24 V DC for capture; 24 V DC for logic; 24 V DC for safety |
| Discrete input logic | Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1; Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1; Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 |
| Discrete output number | 3 |
| Discrete output type | Logic output(s) (DO)24 V DC |
| Discrete output logic | Positive or negative (DO) conforming to EN/IEC 61131-2 |
| Braking current | 50 mA |
| Response time on output | 250 µs (DO) for discrete output(s) |
| Control signal type | Servo motor encoder feedback; Pulse train output (PTO) RS422 |
| Protection type | Against reverse polarity: inputs signal; Against short-circuits: outputs signal |
| Safety function | STO (safe torque off), integrated; SS1 (safe stop 1), with separated eSM safety card; SS2 (safe stop 2), with separated eSM safety card; SLS (safe limited speed), with separated eSM safety card; SOS (safe operating stop), with separated eSM safety card |
| Safety level | SIL 3 conforming to EN/IEC 61508; PL = e conforming to ISO 13849-1 |
| Communication interface | Modbus TCP, with separated communication card; CANopen, with separated communication card; CANmotion, with separated communication card; Ethernet/IP, with separated communication card; EtherCAT, with separated communication card; Profibus, with separated communication card; Profinet, with separated communication card; Analog I/O, with separated communication card; Digital I/O, integrated |
| Status LED | 1 LED (red) servo drive voltage |
| Signalling function | Display of faults 7 segments |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Product compatibility | Servo motor BSH (55 mm, 1 motor stacks) |
| Width | 68 mm |
| Height | 270 mm |
| Depth | 237 mm |
| Net weight | 1.7 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | EN/IEC 61800-5-1; EN/IEC 61800-3 |
| Product certifications | CSA; UL; TÜV |
| IP degree of protection | IP20 conforming to EN/IEC 60529; IP20 conforming to EN/IEC 61800-5-1 |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60028-2-27 |
| Pollution degree | 2 conforming to EN/IEC 61800-5-1 |
| Environmental characteristic | Classes 3C1 conforming to IEC 60721-3-3 |
| Relative humidity | Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3 |
| Ambient air temperature for operation | 0…50 °C conforming to UL |
| Ambient air temperature for storage | -25…70 °C |
| Type of cooling | Natural convection |
| Operating altitude | 1000...3000 m with conditions |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Lexium 32 |
| Device short name | LXM32M |
| Product or component type | Motion servo drive |
| Format of the drive | Book |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 100...120 V - 15...10 %; 200...240 V - 15...10 % |
| Supply voltage limits | 85…132 V; 170…264 V |
| Supply frequency | 50/60 Hz - 5...5 % |
| Network frequency | 47.5...63 Hz |
| EMC filter | Integrated |
| Continuous output current | 1.5 A at 8 kHz |
| Output current 3s peak | 3 A at 115 V for 5 s; 4.5 A at 230 V for 5 s |
| Continuous power | 200 W at 115 V; 500 W at 230 V |
| Nominal power | 0.15 kW at 115 V 8 kHz; 0.3 kW at 230 V 8 kHz |
| Line current | 2.6 A 85 % at 115 V, with external line choke of 5 mH; 3.4 A 100 % at 230 V, with external line choke of 5 mH; 2.9 A 173 % at 115 V, without line choke; 2.9 A 181 % at 230 V, without line choke |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 11.000 cm |
| Package 1 Width | 27.500 cm |
| Package 1 Length | 33.000 cm |
| Package 1 Weight | 2.192 kg |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 2 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 5.113 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 16 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 50.904 kg |
LXM32 servo amplifier from the Lexium 32 servo drive series. This single-channel servo amplifier was designed to improve machine performance through optimized motor control and to simplify installation thanks to its compact book-style design. This modular series is characterized by 3 expansion slots for selectable fieldbus, encoder and safety modules. Inputs for pulse control are available. Operating modes such as homing, manual travel, motion sequence, electronic gear, speed, current and position control are available. STO is integrated as a safety function and additional functions can be provided via the optional eSM card. The power is supplied by a single-phase connection to 100-120/200-240 VAC networks. A level C3 EMC line filter is installed. A continuous current of 1.5 A and a peak current of up to 4.5 A are available to control a servo motor, which means an output of up to 300 W (voltage dependent). In conjunction with the servo motors of the BSH and BMH series, the motion servo controller operates optimally. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impacts and circular attributes that support your sustainability goals.