| Complementary |
| Switching frequency | 8 kHz |
| Overvoltage category | III |
| Maximum leakage current | 30 mA |
| Electrical isolation | Between power and control |
| Type of cable | Single-strand IEC cable (temperature: 50 °C) copper 90 °C XLPE/EPR |
| Electrical connection | Terminal, clamping capacity: 3 mm², 12 AWG (CN8); Terminal, clamping capacity: 5 mm², 10 AWG (CN1); Terminal, clamping capacity: 5 mm², 10 AWG (CN10) |
| Tightening torque | CN8: 0.5 N.m; CN1: 0.7 N.m; CN10: 0.7 N.m |
| Discrete input number | 2 capture discrete input(s); 2 safety discrete input(s); 4 logic discrete input(s) |
| Discrete input type | Capture (CAP terminals); Logic (DI terminals); Safety (compliment of STO_A, compliment of STO_B terminals) |
| Sampling duration | DI: 0.25 ms discrete; 0.25 ms |
| Discrete input voltage | 24 V DC for capture; 24 V DC for logic; 24 V DC for safety |
| Discrete input logic | Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1; Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1; Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 |
| Discrete output number | 3 |
| Discrete output type | Logic output(s) (DO)24 V DC |
| Discrete output logic | Positive or negative (DO) conforming to EN/IEC 61131-2 |
| Braking current | 50 mA |
| Response time on output | 250 µs (DO) for discrete output(s) |
| Control signal type | Servo motor encoder feedback; Pulse train output (PTO) RS422 |
| Protection type | Against reverse polarity: inputs signal; Against short-circuits: outputs signal |
| Safety function | STO (safe torque off), integrated; SS1 (safe stop 1), with separated eSM safety card; SS2 (safe stop 2), with separated eSM safety card; SLS (safe limited speed), with separated eSM safety card; SOS (safe operating stop), with separated eSM safety card |
| Safety level | SIL 3 conforming to EN/IEC 61508; PL = e conforming to ISO 13849-1 |
| Communication interface | Modbus TCP, with separated communication card; CANopen, with separated communication card; CANmotion, with separated communication card; Ethernet/IP, with separated communication card; EtherCAT, with separated communication card; Profibus, with separated communication card; Profinet, with separated communication card; Analog I/O, with separated communication card; Digital I/O, integrated |
| Status LED | 1 LED (red) servo drive voltage |
| Signalling function | Display of faults 7 segments |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Product compatibility | Servo motor BMH (100 mm, 3 motor stacks); Servo motor BMH (140 mm, 3 motor stacks); Servo motor BMH (190 mm, 1 motor stacks); Servo motor BMH (190 mm, 2 motor stacks); Servo motor BMH (190 mm, 3 motor stacks); Servo motor BMH (205 mm, 3 motor stacks); Servo motor BSH (140 mm, 2 motor stacks); Servo motor BSH (140 mm, 3 motor stacks); Servo motor BSH (140 mm, 4 motor stacks) |
| Width | 68 mm |
| Height | 270 mm |
| Depth | 237 mm |
| Net weight | 2.7 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | EN/IEC 61800-5-1; EN/IEC 61800-3 |
| Product certifications | UL; TÜV; CSA |
| IP degree of protection | IP20 conforming to EN/IEC 60529; IP20 conforming to EN/IEC 61800-5-1 |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60028-2-27 |
| Pollution degree | 2 conforming to EN/IEC 61800-5-1 |
| Environmental characteristic | Classes 3C1 conforming to IEC 60721-3-3 |
| Relative humidity | Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3 |
| Ambient air temperature for operation | 0…50 °C conforming to UL |
| Ambient air temperature for storage | -25…70 °C |
| Type of cooling | Integrated fan |
| Operating altitude | 1000...3000 m with conditions |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Lexium 32 |
| Device short name | LXM32M |
| Product or component type | Motion servo drive |
| Format of the drive | Book |
| Network number of phases | Three phase |
| [Us] rated supply voltage | 200...240 V - 15...10 %; 380...480 V - 15...10 % |
| Supply voltage limits | 170…264 V; 323…528 V |
| Supply frequency | 50/60 Hz - 5...5 % |
| Network frequency | 47.5...63 Hz |
| EMC filter | Integrated |
| Continuous output current | 10 A at 8 kHz |
| Output current 3s peak | 30 A at 208 V for 5 s; 30 A at 480 V for 5 s |
| Continuous power | 2800 W at 208 V; 5600 W at 400 V; 5600 W at 480 V |
| Nominal power | 2 kW at 208 V 8 kHz; 3 kW at 400 V 8 kHz; 3 kW at 480 V 8 kHz |
| Line current | 9.2 A 59 % at 208 V, with external line choke of 1 mH; 11.1 A 77 % at 400 V, with external line choke of 1 mH; 9.6 A 85 % at 480 V, with external line choke of 1 mH; 9.8 A 128 % at 208 V, without line choke; 8.3 A 148 % at 400 V, without line choke; 7 A 152 % at 480 V, without line choke |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 10.500 cm |
| Package 1 Width | 27.500 cm |
| Package 1 Length | 33.000 cm |
| Package 1 Weight | 3.253 kg |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 2 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 7.250 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 16 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 66.492 kg |
The Motion Servo Drive LXM32MD30N4 belongs to the Lexium 32 series from Schneider Electric and is designed as a single-channel servo amplifier for precise control of servo motors in industrial applications. The device features a compact book format, simplifying installation in machines and systems. It is designed for 3-phase supply and can be operated on networks with a rated voltage of 200–240 V or 380–480 V, with supply voltage limits of 170–264 V and 323–528 V respectively. The supply frequency is 50/60 Hz ±5 %, with the network frequency ranging from 47.5 to 63 Hz. An integrated EMC power filter of class C3 ensures low electromagnetic interference during operation.
Applications
The servo drive is suitable for use in automated production systems, material handling, machine tools, and other applications requiring high precision and reliability. Combination with servo motors from the BSH and BMH series enables optimal performance. The Modular series offers three expansion slots for optional fieldbus, encoder, and safety modules, allowing adaptation to specific requirements.
Functions and Features in Detail
The device supports various operating modes, including homing, manual operation, Motion Sequence, electronic gearing, as well as speed, current, and position control. Pulse control is implemented via dedicated inputs. For communication, various interfaces are available, activated via separate communication cards: Modbus TCP, CANopen, CANmotion, Ethernet/IP, and EtherCAT. The integrated safety function STO (Safe Torque Off) ensures safe torque shutdown. Additional safety functions such as SS1, SS2, SLS, and SOS can be provided via a separate eSM safety card. The safety level corresponds to SIL 3 according to EN/IEC 61508 and PL = e according to ISO 13849-1.
Technical Details Explained
The servo drive delivers a continuous output current of 10 A at a switching frequency of 8 kHz. The peak current is 30 A and is available for a duration of 5 seconds. The maximum continuous power is 2800 W at 208 V, 5600 W at 400 V, and 5600 W at 480 V. The rated power is 2 kW at 208 V, 3 kW at 400 V, and 3 kW at 480 V. The output voltage matches the supply voltage. Electrical insulation between the power and control sections ensures safe separation. Cable types are single-core IEC cables with an operating temperature of 50 °C and copper conductors with 90 °C XLPE/EPR insulation. Electrical connections are made via terminals with capacities of 3 mm² (AWG 12) and 5 mm² (AWG 10), with specified tightening torques for terminals CN8 (0.5 Nm), CN1 (0.7 Nm), and CN10 (0.7 Nm).
Compatibility and Accessories
The drive is compatible with servo motors from the BSH and BMH series. Available accessories include various communication cards, such as PROFIBUS DPv1 (VW3-A3607), Ethernet TCP/IP (VW3A3616), CANopen D-Sub9 (VW3A3618), and Profinet module (VW3M3308). Additional options include upgrade kits for IP67 motor covers (e.g., VW3M2302, VW3M2303), DC-ZWK cable connectors (VW3M7101R01), and a Multi Loader Tool (VW3A8121). The servo motors BMH1003P01A2A, BMH1001P01A1A, BMH1001P01A2A, BMH1002P01A2A, BMH1402P02A2A, BMH0701P01A2A, BMH0703P01A2A, BMH0701P01F1A, BMH1002P01A1A, and BMH1401P01A1A are listed as compatible motors.
Mounting and Installation
Mounting is performed in a book format, suitable for integration into standard enclosures or machines. Terminal connections are designed for cable cross-sections from 3 mm² to 5 mm². Tightening torques for the terminals are specified to ensure a secure connection. The integrated EMC filtering reduces network disturbances. During installation, correct polarity and adherence to supply voltage limits must be observed.
Operational Advantages
The servo drive offers high control accuracy through integrated speed, current, and position control. Modular expandability allows flexible adaptation to different requirements. The integrated STO function and the ability to activate additional safety functions via eSM cards enhance operational safety. Low electromagnetic interference due to the integrated EMC filter ensures stable network quality. Support for sustainability goals through detailed information on material contents, environmental impacts, and circular attributes is also provided.