Schneider Electric LXM32MD30M2, EAN: 3606480076855

Schneider Electric LXM32MD30M2 motor 230 V 1.6 kW

Industrial Material > Engines and accessories

Schneider Electric LXM32MD30M2 motor 230 V 1.6 kW

Lieske Part No. 297688
Mfg Part No LXM32MD30M2
EAN-Code 3606480076855
Manufacturer Schneider Electric
Here only 1.718,85 EUR
2.045,43 EUR incl. VAT

Further information for Schneider Electric LXM32MD30M2 motor 230 V 1.6 kW

Complementary
Switching frequency8 kHz
Overvoltage categoryIII
Maximum leakage current30 mA
Electrical isolationBetween power and control
Type of cableSingle-strand IEC cable (temperature: 50 °C) copper 90 °C XLPE/EPR
Electrical connectionTerminal, clamping capacity: 3 mm², 12 AWG (CN8); Terminal, clamping capacity: 5 mm², 10 AWG (CN1); Terminal, clamping capacity: 5 mm², 10 AWG (CN10)
Tightening torqueCN8: 0.5 N.m; CN1: 0.7 N.m; CN10: 0.7 N.m
Discrete input number2 capture discrete input(s); 2 safety discrete input(s); 4 logic discrete input(s)
Discrete input typeCapture (CAP terminals); Logic (DI terminals); Safety (compliment of STO_A, compliment of STO_B terminals)
Sampling durationDI: 0.25 ms discrete; 0.25 ms
Discrete input voltage24 V DC for capture; 24 V DC for logic; 24 V DC for safety
Discrete input logicPositive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1; Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1; Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
Discrete output number3
Discrete output typeLogic output(s) (DO)24 V DC
Discrete output logicPositive or negative (DO) conforming to EN/IEC 61131-2
Braking current50 mA
Response time on output250 µs (DO) for discrete output(s)
Control signal typeServo motor encoder feedback; Pulse train output (PTO) RS422
Protection typeAgainst reverse polarity: inputs signal; Against short-circuits: outputs signal
Safety functionSTO (safe torque off), integrated; SS1 (safe stop 1), with separated eSM safety card; SS2 (safe stop 2), with separated eSM safety card; SLS (safe limited speed), with separated eSM safety card; SOS (safe operating stop), with separated eSM safety card
Safety levelSIL 3 conforming to EN/IEC 61508; PL = e conforming to ISO 13849-1
Communication interfaceModbus TCP, with separated communication card; CANopen, with separated communication card; CANmotion, with separated communication card; Ethernet/IP, with separated communication card; EtherCAT, with separated communication card; Profibus, with separated communication card; Profinet, with separated communication card; Analog I/O, with separated communication card; Digital I/O, integrated
Status LED1 LED (red) servo drive voltage
Signalling functionDisplay of faults 7 segments
MarkingCE
Operating positionVertical +/- 10 degree
Product compatibilityServo motor BMH (70 mm, 2 motor stacks); Servo motor BMH (140 mm, 1 motor stacks); Servo motor BSH (100 mm, 3 motor stacks); Servo motor BSH (100 mm, 4 motor stacks); Servo motor BSH (140 mm, 1 motor stacks)
Width68 mm
Height270 mm
Depth237 mm
Net weight2.1 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsEN/IEC 61800-5-1; EN/IEC 61800-3
Product certificationsTÜV; UL; CSA
IP degree of protectionIP20 conforming to EN/IEC 60529; IP20 conforming to EN/IEC 61800-5-1
Vibration resistance1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance15 gn for 11 ms conforming to EN/IEC 60028-2-27
Pollution degree2 conforming to EN/IEC 61800-5-1
Environmental characteristicClasses 3C1 conforming to IEC 60721-3-3
Relative humidityClass 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3
Ambient air temperature for operation0…50 °C conforming to UL
Ambient air temperature for storage-25…70 °C
Type of coolingIntegrated fan
Operating altitude1000...3000 m with conditions
Logistical informations
Country of originID
Main
Range of productLexium 32
Device short nameLXM32M
Product or component typeMotion servo drive
Format of the driveBook
Network number of phasesSingle phase
[Us] rated supply voltage100...120 V - 15...10 %; 200...240 V - 15...10 %
Supply voltage limits85…132 V; 170…264 V
Supply frequency50/60 Hz - 5...5 %
Network frequency47.5...63 Hz
EMC filterIntegrated
Continuous output current10 A at 8 kHz
Output current 3s peak15 A at 115 V for 5 s; 30 A at 230 V for 5 s
Continuous power800 W at 115 V; 2200 W at 230 V
Nominal power0.8 kW at 115 V 8 kHz; 1.6 kW at 230 V 8 kHz
Line current9.9 A 72 % at 115 V, with external line choke of 2 mH; 14.1 A 86 % at 230 V, with external line choke of 2 mH; 12.9 A 135 % at 115 V, without line choke; 12.7 A 135 % at 230 V, without line choke
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height11.000 cm
Package 1 Width27.500 cm
Package 1 Length33.000 cm
Package 1 Weight2.580 kg
Unit Type of Package 2S03
Number of Units in Package 22
Package 2 Height30.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight5.891 kg
Unit Type of Package 3P06
Number of Units in Package 316
Package 3 Height75.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight54.588 kg
The Motion Servo Drive LXM32MD30M2 from the Lexium 32 series by Schneider Electric is a single-channel servo amplifier designed for precise control of servo motors in industrial applications. The device features a compact book format, enabling easy installation in enclosures. It is designed for single-phase supply and can operate on networks with 100–120 V or 200–240 V AC, with voltage fluctuations within ±10 % tolerated. The supply voltage limits are 85–132 V and 170–264 V, ensuring high operational reliability even under unstable network conditions. The supply frequency is 50/60 Hz ±5 %, with network frequency ranging between 47.5 and 63 Hz.

Functions and Equipment in Detail

The servo drive provides a continuous output current of 10 A at a switching frequency of 8 kHz, achieving a maximum continuous power of 800 W at 115 V or 2200 W at 230 V. The rated power is 0.8 kW at 115 V and 1.6 kW at 230 V. For short load peaks, an output current of up to 30 A for 5 seconds is available, enabling the control of dynamic loads. The output voltage matches the supply voltage. An integrated EMC filter of class C3 ensures minimal interference in the network. Electrical insulation between the power and control sections ensures safe signal separation.

Technology Explained Simply

The drive features multiple digital inputs: two for signal capture (CAP terminals), two for safety functions (STO_A, STO_B), and four for logic signals (DI terminals). The input voltage is 24 V DC, with logic levels conforming to EN/IEC 61131-2 Type 1. The sampling time for digital inputs is 0.25 ms. There are three digital outputs (DO) at 24 V DC, with a response time of 250 µs. The output logic also conforms to EN/IEC 61131-2. A braking current of 50 mA is provided. The device supports various operating modes including homing, manual operation, Motion Sequence, electronic gearbox, as well as speed, current, and position control. Control signals are transmitted via feedback from the servo motor encoder and a PTO output RS422.

Compatibility and Accessories

The LXM32MD30M2 is optimized for use with servo motors from the BSH and BMH series. The Lexium 32 Modular series offers three expansion slots where optional modules for fieldbus, sensors, or safety technology can be installed. The integrated safety function STO (Safe Torque Off) safely shuts off torque. Additional safety functions such as SS1, SS2, SLS, and SOS are available via a separate eSM safety card. For communication, various interfaces are available, activated via separate communication cards: Modbus TCP, CANopen, CANmotion, Ethernet/IP, EtherCAT, Profibus, Profinet, and Analog I/O. Compatible accessories include, for example, EMC filters (e.g. VW3A4421), communication cards (e.g. VW3A3618 for CANopen), upgrade kits for IP67 protection (e.g. VW3M2302), and BMH series servo motors.

Mounting and Installation

Electrical connections are made via terminals: CN8 (3 mm², AWG 12) for supply, CN1 and CN10 (each 5 mm², AWG 10) for motor and signal lines. The tightening torques are 0.5 Nm for CN8 and 0.7 Nm for CN1 and CN10. The device is designed for industrial environments, with overvoltage category III and a maximum leakage current of 30 mA ensuring safety. Cable types conform to single-core IEC cable with an operating temperature of 50 °C and copper conductor at 90 °C (XLPE/EPR insulation).

Advantages in Operation

The LXM32MD30M2 enables precise and reliable motor control with high efficiency. The modular expandability via various interface and safety modules offers flexibility when integrating into existing control systems. Integrated EMC filtering reduces network interference. Support for safety functions according to SIL 3 (EN/IEC 61508) and PL = e (ISO 13849-1) makes the drive suitable for safety-critical applications. Combination with BSH and BMH series servo motors ensures optimal performance. The Green Premium environmental label provides information on material contents, environmental impacts, and circular attributes, supporting sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/297688
qrcode für Schneider Electric LXM32MD30M2 motor 230 V 1.6 kW