Complementary
Switching frequency	8 kHz
Overvoltage category	III
Maximum leakage current	30 mA
Electrical isolation	Between power and control
Type of cable	Single-strand IEC cable (temperature: 50 °C) copper 90 °C XLPE/EPR
Electrical connection	Terminal, clamping capacity: 3 mm², 12 AWG (PA/+, PBI, PBe); Terminal, clamping capacity: 5 mm², 10 AWG (CN1); Terminal, clamping capacity: 5 mm², 10 AWG (CN10)
Tightening torque	PA/+, PBI, PBe: 0.5 N.m; CN1: 0.7 N.m; CN10: 0.7 N.m
Discrete input number	2 capture discrete input(s); 2 safety discrete input(s); 4 logic discrete input(s)
Discrete input type	Capture (CAP terminals); Logic (DI terminals); Safety (compliment of STO_A, compliment of STO_B terminals)
Sampling duration	DI: 0.25 ms discrete; 0.25 ms
Discrete input voltage	24 V DC for capture; 24 V DC for logic; 24 V DC for safety
Discrete input logic	Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1; Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1; Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
Discrete output number	3
Discrete output type	Logic output(s) (DO)24 V DC
Discrete output logic	Positive or negative (DO) conforming to EN/IEC 61131-2
Braking current	50 mA
Response time on output	250 µs (DO) for discrete output(s)
Control signal type	Servo motor encoder feedback; Pulse train output (PTO) RS422
Protection type	Against reverse polarity: inputs signal; Against short-circuits: outputs signal
Safety function	STO (safe torque off), integrated; SS1 (safe stop 1), with separated eSM safety card; SS2 (safe stop 2), with separated eSM safety card; SLS (safe limited speed), with separated eSM safety card; SOS (safe operating stop), with separated eSM safety card
Safety level	SIL 3 conforming to EN/IEC 61508; PL = e conforming to ISO 13849-1
Communication interface	Modbus TCP, with separated communication card; CANopen, with separated communication card; CANmotion, with separated communication card; Ethernet/IP, with separated communication card; EtherCAT, with separated communication card; Profibus, with separated communication card; Profinet, with separated communication card; Analog I/O, with separated communication card; Digital I/O, integrated
Status LED	1 LED (red) servo drive voltage
Signalling function	Display of faults 7 segments
Marking	CE
Operating position	Vertical +/- 10 degree
Product compatibility	Servo motor BMH (70 mm, 1 motor stacks); Servo motor BMH (70 mm, 3 motor stacks); Servo motor BSH (70 mm, 3 motor stacks); Servo motor BSH (100 mm, 1 motor stacks); Servo motor BMH (100 mm, 2 motor stacks); Servo motor BSH (100 mm, 2 motor stacks)
Width	68 mm
Height	270 mm
Depth	237 mm
Net weight	1.9 kg
Contractual warranty
Warranty (in months)	18
Environment
Standards	EN/IEC 61800-5-1; EN/IEC 61800-3
Product certifications	TÜV; UL; CSA
IP degree of protection	IP20 conforming to EN/IEC 60529; IP20 conforming to EN/IEC 61800-5-1
Vibration resistance	1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance	15 gn for 11 ms conforming to EN/IEC 60028-2-27
Pollution degree	2 conforming to EN/IEC 61800-5-1
Environmental characteristic	Classes 3C1 conforming to IEC 60721-3-3
Relative humidity	Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3
Ambient air temperature for operation	0…50 °C conforming to UL
Ambient air temperature for storage	-25…70 °C
Type of cooling	Integrated fan
Operating altitude	1000...3000 m with conditions
Logistical informations
Country of origin	ID
Main
Range of product	Lexium 32
Device short name	LXM32M
Product or component type	Motion servo drive
Format of the drive	Book
Network number of phases	Single phase
[Us] rated supply voltage	100...120 V - 15...10 %; 200...240 V - 15...10 %
Supply voltage limits	85…132 V; 170…264 V
Supply frequency	50/60 Hz - 5...5 %
Network frequency	47.5...63 Hz
EMC filter	Integrated
Continuous output current	6 A at 8 kHz
Output current 3s peak	10 A at 115 V for 5 s; 18 A at 230 V for 5 s
Continuous power	800 W at 115 V; 1600 W at 230 V
Nominal power	0.5 kW at 115 V 8 kHz; 1 kW at 230 V 8 kHz
Line current	9.9 A 74 % at 115 V, with external line choke of 2 mH; 10.6 A 93 % at 230 V, with external line choke of 2 mH; 8.5 A 147 % at 115 V, without line choke; 8.4 A 148 % at 230 V, without line choke
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	10.800 cm
Package 1 Width	27.700 cm
Package 1 Length	32.800 cm
Package 1 Weight	2.412 kg
Unit Type of Package 2	S03
Number of Units in Package 2	2
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	5.558 kg
Unit Type of Package 3	P06
Number of Units in Package 3	16
Package 3 Height	75.000 cm
Package 3 Width	60.000 cm
Package 3 Length	80.000 cm
Package 3 Weight	54.000 kg

LXM32 servo amplifier from the Lexium 32 servo drive series. This single-channel servo amplifier was designed to improve the performance of the machine through optimized motor control and to simplify installation thanks to its compact book-style design. This modular series is characterized by the 3 expansion slots for selectable fieldbus, encoder and safety modules. Inputs for pulse control are available. Operating modes such as homing, manual travel, motion sequence, electronic gear, speed, current and position control are available. STO is integrated as a safety function and further functions can be provided via the optional eSM card. The power is supplied by a single-phase connection to networks with 100-120/200-240 VAC. A level C3 EMC line filter is built in. A continuous current of 6 A and a peak current of up to 18 A are available for controlling a servo motor, which means a power of up to 1 kW (voltage dependent). In conjunction with the BSH and BMH series servo motors, the motion servo controller operates optimally. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impacts and circular attributes that support your sustainability goals.