| Complementary |
| Sampling duration | DI: 0.25 ms discrete |
| Discrete input voltage | 24 V DC for capture; 24 V DC for logic; 24 V DC for safety |
| Discrete input logic | Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to IEC 61131-2 Type 1; Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to IEC 61131-2 Type 1; Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to IEC 61131-2 Type 1 |
| Discrete output number | 2 |
| Discrete output type | Logic output(s) (DO)24 V DC |
| Discrete output logic | Positive or negative (DO) conforming to IEC 61131-2 |
| Braking current | 50 mA |
| Response time on output | 250 µs (DO) for discrete output(s) |
| Control signal type | Servo motor encoder feedback |
| Protection type | Against reverse polarity: inputs signal; Against short-circuits: outputs signal |
| Safety function | Safe torque off safety function, integrated |
| Safety level | SIL 3 conforming to IEC 61508; PL = e conforming to ISO 13849-1 |
| Communication interface | EtherCAT, integrated |
| Connector type | RJ45 for Modbus; M12 for EtherCAT |
| Method of access | Slave |
| Physical interface | 2-wire RS485 multidrop for Modbus |
| Transmission rate | 9600, 19200, 38400 bps for bus length of 0…40 m for Modbus |
| Number of addresses | 1…127 for CANopen, CANmotion; 1…247 for Modbus |
| Status LED | 1 LED (red) servo drive voltage; 1 LED error; 1 LED RUN |
| Type of cooling | Natural convection |
| Operating altitude | 1000...3000 m with conditions |
| Operating position | Vertical +/- 10 degree |
| Net weight | 0.637 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 61800-3; IEC 61800-5-1 |
| Product certifications | TÜV; CSA; UL |
| Marking | CE |
| IP degree of protection | IP65 |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms conforming to IEC 60028-2-27 |
| Pollution degree | 2 conforming to IEC 61800-5-1 |
| Environmental characteristic | Classes 3C1 conforming to IEC 60721-3-3 |
| Relative humidity | Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3 |
| Ambient air temperature for operation | 0…50 °C conforming to UL |
| Ambient air temperature for storage | -25…70 °C |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Lexium 32i |
| Product or component type | Control unit |
| Device short name | LXM32i |
| Format of the drive | Board |
| Discrete input number | 2 safety discrete input(s); 4 logic discrete input(s) |
| Discrete input type | Safety (compliment of STO_A, compliment of STO_B terminals); Logic (DI terminals) |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 7.300 cm |
| Package 1 Width | 17.000 cm |
| Package 1 Length | 23.500 cm |
| Package 1 Weight | 645.000 g |
| Unit Type of Package 2 | S04 |
| Number of Units in Package 2 | 17 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 40.000 cm |
| Package 2 Length | 60.000 cm |
| Package 2 Weight | 12.098 kg |
| Unit Type of Package 3 | P12 |
| Number of Units in Package 3 | 68 |
| Package 3 Height | 45.000 cm |
| Package 3 Width | 80.000 cm |
| Package 3 Length | 120.000 cm |
| Package 3 Weight | 60.892 kg |
Integrated servo drive Lexium 32i, control unit. This integrated servo drive offers you a modular concept consisting of a drive unit, control unit and connection modules that are plugged together according to the respective applications. This control unit implements the connection to the EtherCAT bus system. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.