Schneider Electric LXM32CD72N4, EAN: 3606480216220

Schneider Electric LXM32CD72N4 motor 7,0 kW 480 V

Industrial Material > Engines and accessories

Schneider Electric LXM32CD72N4 motor 7,0 kW 480 V

Lieske Part No. 609985
Mfg Part No LXM32CD72N4
EAN-Code 3606480216220
Manufacturer Schneider Electric
Here only 2.666,63 EUR
3.173,29 EUR incl. VAT

Further information for Schneider Electric LXM32CD72N4 motor 7,0 kW 480 V

Complementary
Switching frequency8 kHz
Overvoltage categoryIII
Maximum leakage current30 mA
Electrical isolationBetween power and control
Type of cableSingle-strand IEC cable (temperature: 50 °C) copper 90 °C XLPE/EPR
Electrical connectionTerminal, clamping capacity: 3 mm², 12 AWG (CN8); Terminal, clamping capacity: 5 mm², 10 AWG (CN1); Terminal, clamping capacity: 5 mm², 10 AWG (CN10)
Tightening torqueCN8: 0.5 N.m; CN1: 0.7 N.m; CN10: 0.7 N.m
Discrete input number2 safety discrete input(s); 6 logic discrete input(s)
Discrete input typeLogic (DI terminals); Safety (compliment of STO_A, compliment of STO_B terminals)
Sampling durationANA1+/ANA1-, ANA2+/ANA2-: 0.25 ms analog; DI: 0.25 ms discrete
Discrete input voltage24 V DC for logic; 24 V DC for safety
Discrete input logicPositive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1; Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1; Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
Discrete output number5
Discrete output typeLogic output(s) (DO)24 V DC
Discrete output logicPositive or negative (DO) conforming to EN/IEC 61131-2
Braking current50 mA
Analogue input number2
Response time on output250 µs (DO) for discrete output(s)
Absolute accuracy error< +/- 0.5 %
Linearity error< +/- 0.1 %
Analogue input typeANA1+/ANA1-, ANA2+/ANA2- analog input: differential +/- 10 V, impedance: >= 20 Ohm, resolution: 14 bits
Control signal typeServo motor encoder feedback; Pulse train output (PTO) RS422
Protection typeAgainst reverse polarity: inputs signal; Against short-circuits: outputs signal
Safety functionSTO (safe torque off), integrated
Safety levelSIL 3 conforming to EN/IEC 61508; PL = e conforming to ISO 13849-1
Communication interfaceDigital I/O, integrated; Analog I/O, integrated
Status LED1 LED (red) servo drive voltage
Signalling functionDisplay of faults 7 segments
MarkingCE
Operating positionVertical +/- 10 degree
Product compatibilityServo motor BMH (140 mm, 2 motor stacks); Servo motor BMH (140 mm, 3 motor stacks); Servo motor BMH (190 mm, 1 motor stacks); Servo motor BMH (190 mm, 2 motor stacks); Servo motor BMH (190 mm, 3 motor stacks); Servo motor BMH (205 mm, 3 motor stacks); Servo motor BSH (140 mm, 2 motor stacks); Servo motor BSH (140 mm, 3 motor stacks); Servo motor BSH (140 mm, 4 motor stacks)
Width108 mm
Height270 mm
Depth237 mm
Net weight4.8 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsEN/IEC 61800-5-1; EN/IEC 61800-3
Product certificationsUL; TÜV; CSA
IP degree of protectionIP20 conforming to EN/IEC 60529; IP20 conforming to EN/IEC 61800-5-1
Vibration resistance1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance15 gn for 11 ms conforming to EN/IEC 60028-2-27
Pollution degree2 conforming to EN/IEC 61800-5-1
Environmental characteristicClasses 3C1 conforming to IEC 60721-3-3
Relative humidityClass 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3
Ambient air temperature for operation0…50 °C conforming to UL
Ambient air temperature for storage-25…70 °C
Type of coolingIntegrated fan
Operating altitude1000...3000 m with conditions
Logistical informations
Country of originID
Main
Range of productLexium 32
Device short nameLXM32C
Product or component typeMotion servo drive
Format of the driveBook
Network number of phasesThree phase
[Us] rated supply voltage200...240 V - 15...10 %; 380...480 V - 15...10 %
Supply voltage limits170…264 V; 323…528 V
Supply frequency50/60 Hz - 5...5 %
Network frequency47.5...63 Hz
EMC filterIntegrated
Continuous output current24 A at 8 kHz
Output current 3s peak72 A at 208 V for 5 s; 72 A at 480 V for 5 s
Continuous power6500 W at 208 V; 13000 W at 400 V; 13000 W at 480 V
Nominal power5 kW at 208 V 8 kHz; 7 kW at 400 V 8 kHz; 7 kW at 480 V 8 kHz
Line current21.1 A 34 % at 208 V, with external line choke of 1 mH; 22.5 A 45 % at 400 V, with external line choke of 1 mH; 19.5 A 55 % at 480 V, with external line choke of 1 mH; 21.9 A 106 % at 208 V, without line choke; 17.3 A 126 % at 400 V, without line choke; 14.6 A 129 % at 480 V, without line choke
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height14.200 cm
Package 1 Width27.500 cm
Package 1 Length32.500 cm
Package 1 Weight5.547 kg
Unit Type of Package 2S03
Number of Units in Package 22
Package 2 Height30.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight11.816 kg
LXM32 servo amplifier from the Lexium 32 servo drive series. This single-channel servo amplifier was designed to improve the performance of the machine through optimized motor control and to simplify installation thanks to its compact book-style design. This Compact series is characterized by control via digital logic or analog inputs and outputs. Operating modes such as manual travel, electronic gear, speed and current control are available. STO is integrated as a safety function. The power is supplied via a three-phase connection to networks with 200-240/380-480 VAC. An EMC line filter of level C3 is installed. A continuous current of 24 A and a peak current of up to 72 A are available for controlling a servo motor, which means an output of up to 7 kW (voltage dependent). In conjunction with the servo motors from the BSH and BMH series, the motion servo controller operates optimally. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impacts and circular attributes that support your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/609985
qrcode für Schneider Electric LXM32CD72N4 motor 7,0 kW 480 V