| Complementary |
| Switching frequency | 8 kHz |
| Overvoltage category | III |
| Maximum leakage current | 30 mA |
| Electrical isolation | Between power and control |
| Type of cable | Single-strand IEC cable (temperature: 50 °C) copper 90 °C XLPE/EPR |
| Electrical connection | Terminal, clamping capacity: 3 mm², 12 AWG (CN8); Terminal, clamping capacity: 5 mm², 10 AWG (CN1); Terminal, clamping capacity: 5 mm², 10 AWG (CN10) |
| Tightening torque | CN8: 0.5 N.m; CN1: 0.7 N.m; CN10: 0.7 N.m |
| Discrete input number | 2 safety discrete input(s); 6 logic discrete input(s) |
| Discrete input type | Logic (DI terminals); Safety (compliment of STO_A, compliment of STO_B terminals) |
| Sampling duration | ANA1+/ANA1-, ANA2+/ANA2-: 0.25 ms analog; DI: 0.25 ms discrete |
| Discrete input voltage | 24 V DC for logic; 24 V DC for safety |
| Discrete input logic | Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1; Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1; Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 |
| Discrete output number | 5 |
| Discrete output type | Logic output(s) (DO)24 V DC |
| Discrete output logic | Positive or negative (DO) conforming to EN/IEC 61131-2 |
| Braking current | 50 mA |
| Analogue input number | 2 |
| Response time on output | 250 µs (DO) for discrete output(s) |
| Absolute accuracy error | < +/- 0.5 % |
| Linearity error | < +/- 0.1 % |
| Analogue input type | ANA1+/ANA1-, ANA2+/ANA2- analog input: differential +/- 10 V, impedance: >= 20 Ohm, resolution: 14 bits |
| Control signal type | Servo motor encoder feedback; Pulse train output (PTO) RS422 |
| Protection type | Against reverse polarity: inputs signal; Against short-circuits: outputs signal |
| Safety function | STO (safe torque off), integrated |
| Safety level | SIL 3 conforming to EN/IEC 61508; PL = e conforming to ISO 13849-1 |
| Communication interface | Digital I/O, integrated; Analog I/O, integrated |
| Status LED | 1 LED (red) servo drive voltage |
| Signalling function | Display of faults 7 segments |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Product compatibility | Servo motor BMH (70 mm, 1 motor stacks); Servo motor BMH (70 mm, 2 motor stacks); Servo motor BMH (100 mm, 1 motor stacks); Servo motor BSH (70 mm, 1 motor stacks); Servo motor BSH (70 mm, 2 motor stacks); Servo motor BMH (70 mm, 3 motor stacks); Servo motor BSH (55 mm, 3 motor stacks); Servo motor BSH (70 mm, 3 motor stacks); Servo motor BSH (100 mm, 1 motor stacks) |
| Width | 48 mm |
| Height | 270 mm |
| Depth | 237 mm |
| Net weight | 1.8 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | EN/IEC 61800-5-1; EN/IEC 61800-3 |
| Product certifications | UL; TÜV; CSA |
| IP degree of protection | IP20 conforming to EN/IEC 60529; IP20 conforming to EN/IEC 61800-5-1 |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60028-2-27 |
| Pollution degree | 2 conforming to EN/IEC 61800-5-1 |
| Environmental characteristic | Classes 3C1 conforming to IEC 60721-3-3 |
| Relative humidity | Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3 |
| Ambient air temperature for operation | 0…50 °C conforming to UL |
| Ambient air temperature for storage | -25…70 °C |
| Type of cooling | Integrated fan |
| Operating altitude | 1000...3000 m with conditions |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Lexium 32 |
| Device short name | LXM32C |
| Product or component type | Motion servo drive |
| Format of the drive | Book |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 100...120 V - 15...10 %; 200...240 V - 15...10 % |
| Supply voltage limits | 85…132 V; 170…264 V |
| Supply frequency | 50/60 Hz - 5...5 % |
| Network frequency | 47.5...63 Hz |
| EMC filter | Integrated |
| Continuous output current | 6 A at 8 kHz |
| Output current 3s peak | 10 A at 115 V for 5 s; 18 A at 230 V for 5 s |
| Continuous power | 800 W at 115 V; 1600 W at 230 V |
| Nominal power | 0.5 kW at 115 V 8 kHz; 1 kW at 230 V 8 kHz |
| Line current | 9.9 A 74 % at 115 V, with external line choke of 2 mH; 10.6 A 93 % at 230 V, with external line choke of 2 mH; 8.5 A 147 % at 115 V, without line choke; 8.4 A 148 % at 230 V, without line choke |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 8.500 cm |
| Package 1 Width | 27.600 cm |
| Package 1 Length | 33.000 cm |
| Package 1 Weight | 2.256 kg |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 3 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 7.481 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 24 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 68.348 kg |
Servoverstärker LXM32 der Reihe Lexium 32-Servoantriebe. Dieser einkanalige Servoverstärker wurde konzipiert, um die Leistungsfähigkeit der Maschine durch eine optimierte Motorregelung zu verbessern und durch sein kompaktes Design in Buch-Bauform die Installation zu vereinfachen. Diese Baureihe Compact zeichnet sich durch die Ansteuerung per digitaler Logik- oder analoger Ein- und Ausgänge aus. Betriebsarten wie Manuellfahrt, elektronisches Getriebe, Drehzahl- und Stromregelung sind vorhanden. Als Sicherheitsfunktion ist STO integriert. Die Versorgung erfolgt durch einphasigen Anschluss an Netze mit 100-120/200-240 VAC. Ein EMV-Netzfilter der Stufe C3 ist eingebaut. Für die Ansteuerung eines Servomotors steht ein Dauerstrom von 6 A und ein Spitzenstrom bis 18 A zur Verfügung, was einer Leistung bis zu 1 kW bedeutet (spannungsabhängig). In Verbindung mit den Servomotoren der Reihen BSH und BMH ist ein optimaler Betrieb des Motion Servoreglers gegeben. Dank des Green-Premium Umweltzeichens können Sie detailliete Informatione zur Materialinhalten, Umweltauswirkungen und Kreislaufattributen erhalten, die Ihre Nachhaltigkeitsziele unterstützen.