| Complementary |
| Switching frequency | 8 kHz |
| Overvoltage category | III |
| Maximum leakage current | 30 mA |
| Electrical isolation | Between power and control |
| Type of cable | Single-strand IEC cable (temperature: 50 °C) copper 90 °C XLPE/EPR |
| Electrical connection | Terminal, clamping capacity: 3 mm², 12 AWG (CN8); Terminal, clamping capacity: 5 mm², 10 AWG (CN1); Terminal, clamping capacity: 5 mm², 10 AWG (CN10) |
| Tightening torque | CN8: 0.5 N.m; CN1: 0.7 N.m; CN10: 0.7 N.m |
| Discrete input number | 1 capture discrete input(s); 2 safety discrete input(s); 4 logic discrete input(s) |
| Discrete input type | Capture (CAP terminals); Logic (DI terminals); Safety (compliment of STO_A, compliment of STO_B terminals) |
| Sampling duration | DI: 0.25 ms discrete |
| Discrete input voltage | 24 V DC for capture; 24 V DC for logic; 24 V DC for safety |
| Discrete input logic | Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1; Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1; Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 |
| Discrete output number | 2 |
| Discrete output type | Logic output(s) (DO)24 V DC |
| Discrete output logic | Positive or negative (DO) conforming to EN/IEC 61131-2 |
| Braking current | 50 mA |
| Response time on output | 250 µs (DO) for discrete output(s) |
| Control signal type | Servo motor encoder feedback |
| Protection type | Against reverse polarity: inputs signal; Against short-circuits: outputs signal |
| Safety function | STO (safe torque off), integrated |
| Safety level | SIL 3 conforming to EN/IEC 61508; PL = e conforming to ISO 13849-1 |
| Communication interface | CANmotion, integrated; CANopen, integrated |
| Connector type | RJ45 (labelled CN4 or CN5) for CANmotion; RJ45 (labelled CN4 or CN5) for CANopen |
| Method of access | Slave |
| Transmission rate | 1 Mbps for bus length of 4 m for CANopen, CANmotion; 125 kbps for bus length of 500 m for CANopen, CANmotion; 250 kbps for bus length of 250 m for CANopen, CANmotion; 50 kbps for bus length of 1000 m for CANopen, CANmotion; 500 kbps for bus length of 100 m for CANopen, CANmotion |
| Number of addresses | 1…127 for CANopen, CANmotion |
| Status LED | 1 LED (red) servo drive voltage; 1 LED error; 1 LED RUN |
| Signalling function | Display of faults 7 segments |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Product compatibility | Servo motor BMH (70 mm, 1 motor stacks); Servo motor BMH (70 mm, 2 motor stacks); Servo motor BMH (100 mm, 1 motor stacks); Servo motor BSH (70 mm, 1 motor stacks); Servo motor BSH (70 mm, 2 motor stacks); Servo motor BMH (70 mm, 3 motor stacks); Servo motor BSH (55 mm, 3 motor stacks); Servo motor BSH (70 mm, 3 motor stacks); Servo motor BSH (100 mm, 1 motor stacks) |
| Width | 48 mm |
| Height | 270 mm |
| Depth | 237 mm |
| Net weight | 1.8 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | EN/IEC 61800-5-1; EN/IEC 61800-3 |
| Product certifications | UL; TÜV; CSA |
| IP degree of protection | IP20 conforming to EN/IEC 60529; IP20 conforming to EN/IEC 61800-5-1 |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60028-2-27 |
| Pollution degree | 2 conforming to EN/IEC 61800-5-1 |
| Environmental characteristic | Classes 3C1 conforming to IEC 60721-3-3 |
| Relative humidity | Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3 |
| Ambient air temperature for operation | 0…50 °C conforming to UL |
| Ambient air temperature for storage | -25…70 °C |
| Type of cooling | Integrated fan |
| Operating altitude | 1000...3000 m with conditions |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Lexium 32 |
| Device short name | LXM32A |
| Product or component type | Motion servo drive |
| Format of the drive | Book |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 100...120 V - 15...10 %; 200...240 V - 15...10 % |
| Supply voltage limits | 85…132 V; 170…264 V |
| Supply frequency | 50/60 Hz - 5...5 % |
| Network frequency | 47.5...63 Hz |
| EMC filter | Integrated |
| Continuous output current | 6 A at 8 kHz |
| Output current 3s peak | 10 A at 115 V for 5 s; 18 A at 230 V for 5 s |
| Continuous power | 800 W at 115 V; 1600 W at 230 V |
| Nominal power | 0.5 kW at 115 V 8 kHz; 1 kW at 230 V 8 kHz |
| Line current | 9.9 A 74 % at 115 V, with external line choke of 2 mH; 10.6 A 93 % at 230 V, with external line choke of 2 mH; 8.5 A 147 % at 115 V, without line choke; 8.4 A 148 % at 230 V, without line choke |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 8.500 cm |
| Package 1 Width | 27.500 cm |
| Package 1 Length | 33.000 cm |
| Package 1 Weight | 2.272 kg |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 3 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 7.536 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 24 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 70.288 kg |
The
Motion Servo Drive LXM32AD18M2 from the
Lexium 32 series by Schneider Electric is a single-channel
servo amplifier in book form, designed for precise control of servo motors in industrial applications. The device enables optimized motor control and simplifies installation through its compact design. It is designed for use in automation systems communicating via CANopen or CANmotion, with the drive functioning as a
slave in the network. The integrated
STO function (Safe Torque Off) ensures safe operation in accordance with standards EN/IEC 61508 (SIL 3) and ISO 13849-1 (PL = e). Power supply is via single-phase mains voltage in the range of 100–120 V or 200–240 V AC, with voltage limits at 85–132 V and 170–264 V respectively. An integrated
EMC filter of class C3 ensures minimal interference with the power grid.
Applications
The LXM32AD18M2 is suitable for use in machine building, packaging technology, machine tools, and other applications requiring precise positioning, speed control, or current control. The Advanced series is specifically designed for systems requiring high dynamics and reliability. Compatibility with servo motors from the BSH and BMH series enables optimal drive operation. The integrated
CANmotion and CANopen interface allows integration into higher-level controls and enables various operating modes such as homing, manual operation, speed, current, and position control.
Functions and Equipment in Detail
The drive provides a continuous output current of 6 A at a switching frequency of 8 kHz. Under short-term load (3 s), a peak current of 10 A at 115 V or 18 A at 230 V can be delivered. The maximum continuous power is 800 W at 115 V and 1600 W at 230 V, with rated power of 0.5 kW at 11ed V and 1 kW at 230 V. The output voltage matches the supply voltage. Electrical insulation between the power and control sections ensures safe separation. Cable connections are made via a single-core IEC cable with copper conductors (90 °C XLPE/EPR) and an operating temperature of 50 °C. Electrical connections are made via terminals with capacities of 3 mm² (AWG 12) for CN8 and 5 mm² (AWG 10) for CN1 and CN10. Torque values are 0.5 Nm (CN8) and 0.7 Nm (CN1/CN10).
Technology Explained Simply
The integrated
STO function safely shuts off torque without mechanically blocking the motor, which is crucial for operational safety. Communication via CANopen and CANmotion is via RJ45 connectors (CN4 or CN5), with transmission speeds varying between 50 kBit/s and 1 MBit/s depending on bus length. The number of addressable devices in the network is 1 to 127. Digital inputs include 1 capture input, 2 safety inputs, and 4 logic inputs, all operating at 24 V DC. The logic of the inputs conforms to EN/IEC 61131-2 Type 1. Digital outputs (2 units) supply 24 V DC and respond within 250 µs. The response time of the outputs is relevant for controlling external components such as signals or relays. The braking current is 50 mA, sufficient for controlling integrated brakes in servo motors.
Compatibility and Accessories
The drive is designed for use with servo motors from the BSH and BMH series. Available accessories include, among others, line reactors (e.g. VZ1L018UM20), USB/RJ45 cables (TCSMCNAM3M002P), EMC filters (VW3A4421), and SD memory cards (VW3M8705). Using an external line reactor (e.g. 2 mH) reduces grid interference and improves THDI values (e.g. from 147 % to 74 % at 115 V). Combining with suitable motors such as BMH0702P01A2A or BMH1002P01A2A enables optimal performance utilization.
Mounting and Installation
Mounting is in standard industrial enclosures. The book form allows for compact placement. Terminals are rated for cable cross-sections up to 5 mm². Connections for power supply, motor, and control are clearly marked. The integrated LED indicator (red) signals the power supply status of the servo amplifier. Installation requires no special tools, although compliance with electrical safety regulations and wiring standards is mandatory.
Operational Advantages
The LXM32AD18M2 offers high operational safety through the integrated STO function and electrical insulation. Single-phase power supply and integrated EMC filtering reduce installation effort. CAN interfaces enable flexible integration into existing control systems. High dynamics, achieved through a peak current of 18 A at 230 V, and precise control via the 8-kHz switching frequency support efficient machine control. The provision of detailed information on material contents and environmental impacts (Green-Premium) supports sustainability goals in operation.