Schneider Electric LXD3P7, EAN: 3389119410427

Schneider Electric LXD3P7 contactor coil 230 VAC

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LXD3P7 contactor coil 230 VAC

Lieske Part No. 605602
Mfg Part No LXD3P7
EAN-Code 3389119410427
Manufacturer Schneider Electric
Here only 91,86 EUR
109,31 EUR incl. VAT

Further information for Schneider Electric LXD3P7 contactor coil 230 VAC

Complementary
Coil technologyWithout built-in suppressor module
Control circuit voltage limitsDrop-out: 0.3...0.6 Uc at 50/60 Hz (at
Inrush power in VA160 VA 60 Hz cos phi 0.75 (at 20 °C); 160 VA 50 Hz cos phi 0.75 (at 20 °C)
Hold-in power consumption in VA15 VA 60 Hz cos phi 0.3 (at 20 °C); 15 VA 50 Hz cos phi 0.3 (at 20 °C)
Heat dissipation4…5 W at 50/60 Hz
Contractual warranty
Warranty (in months)18
Environment
Ambient air temperature for operation-5…60 °C
Net weight0.07 kg
Logistical informations
Country of originFR
Main
RangeTeSys
Product or component typeContactor coil
Device short nameLXD3
Control circuit typeAC at 50/60 Hz
[Uc] control circuit voltage230 V AC 50/60 Hz
Average resistance192 Ohm at 20 °C
Inductance of closed circuit10.9 H
Product compatibilityLC1DT80A; LC1D40A...D65A; LC1DT60A
Mechanical durability6 Mcycles
Maximum operating rate3600 cyc/h 60 °C
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.8 cm
Package 1 Width5.8 cm
Package 1 Length9.8 cm
Package 1 Weight121 g
Unit Type of Package 2S02
Number of Units in Package 230
Package 2 Height15 cm
Package 2 Width30 cm
Package 2 Length40 cm
Package 2 Weight4.085 kg
Unit Type of Package 3P06
Number of Units in Package 3240
Package 3 Height80 cm
Package 3 Width80 cm
Package 3 Length60 cm
Package 3 Weight50.54 kg
The LXD3P7 contactor coil from Schneider Electric is a replacement part for the TeSys D series and serves as a control component for power contactors. It is specifically designed for use in industrial applications where reliable and maintenance-friendly control of electrical loads is required. The coil is used in 3- and 4-pole contactors of types LC1D40A to D65A as well as LC1DT60A and LC1DT80A. The control circuit voltage is 230 V AC at 50/60 Hz, making it suitable for standard mains voltages in Europe and other regions. The coil operates within a voltage range of 0.8 to 1.1 Uc at 50 Hz and 0.85 to 1.1 Uc at 60 Hz, ensuring stable operation even under voltage fluctuations. The operating ambient temperature ranges from -5 °C to 60 °C, making it suitable for indoor applications in industrial environments.

Applications

The LXD3P7 coil is intended for use in industrial control systems, particularly in applications with high operating cycles. It is used in switchgear, machine control systems, and drive technology, where the reliability of contactor control is critical. Compatibility with various contactor types in the TeSys D series enables flexible use in different applications. The maximum operating rate is 3600 switching operations per hour at an ambient temperature of 60 °C, demonstrating high load capacity under industrial conditions.

Functions and Features in Detail

The coil has a mechanical life of 6 million switching cycles, allowing for long-term use without replacement. The pull-in power is 160 VA at 50 and 60 Hz, with a power factor (cos phi) of 0.75. The holding power consumption is 15 VA at 50 and 60 Hz, with a power factor of 0.3. Heat dissipation is between 4 and 5 watts, ensuring efficient cooling and minimal thermal load on the surrounding environment. The coil is designed without an integrated wiring module, meaning no additional switching components are integrated into the coil.

Technology Explained Simply

The coil operates on alternating current (AC) and is supplied via the control cable with 230 V AC. The average resistance is 192 Ohms at 20 °C, which is relevant for the electrical characteristics of the coil. The inductance of the closed circuit is 10.9 H, describing the magnetic properties of the coil and important for the pull-in force during switching operations. The voltage limits (drop-out voltage) range from 0.3 to 0.6 Uc, meaning the coil will still safely de-energize even at lower voltages, ensuring safe operation.

Compatibility and Accessories

The LXD3P7 coil is compatible with various contactor types in the TeSys D series, including LC1DT80A, LC1D40A to D65A, and LC1DT60A. It can be combined with power contactors such as LC1DT80A3P7, LC1D40A3P7, LC1D80AP7, LC1DT60A3P7, LC1D50A3P7, LC1D65A3P7, LC1D80A3P7, LC1D40AP7, LC1D65AP7, LC1D80A6P7, and LC1D40A6P7. These contactors cover a power range from 18.5 kW to 37 kW and are suitable for various drive applications. The coil is designed as a replacement part and can be directly installed into existing contactors without requiring additional modifications.

Mounting and Installation

Installation is performed by inserting the coil into the corresponding contactor housings of the TeSys D series. The coil is placed into the designated holders and electrically connected to the control cable. Installation requires no special tools and follows standard practices for industrial switchgear. The coil is designed for mounting in control panels and switch cabinets, with ambient temperatures from -5 °C to 60 °C to be considered.

Operational Advantages

The LXD3P7 coil offers high mechanical life and stable performance at high operating rates. Low heat dissipation and compact design enable efficient integration into existing installations. Compatibility with various contactor types increases flexibility during maintenance and spare part procurement. The reliability of the coil ensures safe operation of connected loads, minimizing downtime. The warranty period is 18 months, highlighting the quality and reliability of the product.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/605602
qrcode für Schneider Electric LXD3P7 contactor coil 230 VAC