Complementary
Test function	Local; Remote test
Signal contacts composition	1 C/O alarm fail-safe; 1 NO pre-alarm fail-safe
Type of measurement	Earth fault current internal measurement, range: 20...200 %, accuracy: +/- 20 %
Refresh time	0.5 s
Tamperproof of settings	Protected by access code
Wire stripping length	Alarm circuit: 6 mm; Relay test and fault reset: 6 mm; Sensor: 6 mm; Voltage presence: 6 mm; Power supply: 6 mm; Pre alarm: 6 mm
Tightening torque	Alarm circuit: 0.5 N.m; Relay test and fault reset: 0.5 N.m; Sensor: 0.5 N.m; Voltage presence: 0.5 N.m; Power supply: 0.5 N.m; Pre alarm: 0.5 N.m
Standards	EN/IEC 60947-2 Annex M; EN/IEC 60755
Width	72 mm
Height	72 mm
Depth	117 mm
Cut-out dimensions	68 x 68 mm
Net weight	0.3 kg
IP degree of protection	IP40 front face: conforming to IEC 60529; IP30 other parts: conforming to IEC 60529; IP20 connection: conforming to IEC 60529
IK degree of protection	IK07 conforming to EN 50102
Mechanical robustness	Vibrations 13.2...100 Hz: 0.7 g; Vibrations 2...13.2 Hz: +/- 1 mm
Contractual warranty
Warranty (in months)	18
Environment
Environmental characteristic	Exposure to damp heat not in service conforming to IEC 60068-2-30; Exposure to damp heat in service conforming to IEC 60068-2-56; Salt mist conforming to IEC 60068-2-52
Overvoltage category	IV
Electrical shock protection class	Class II
Electromagnetic compatibility	Conducted and radiated emissions: , B, conforming to CISPR 11; Conducted radio-frequency immunity test: , 3, conforming to IEC 61000-4-6; Electrostatic discharge immunity test: , 4, conforming to IEC 61000-4-2; High-energy conducted susceptibility: , 4, conforming to IEC 61000-4-5; Low-energy conducted susceptibility: , 4, conforming to IEC 61000-4-4; Radiated susceptibility: , 3, conforming to IEC 61000-4-3
Relative humidity	95 % at 55 °C
Pollution degree	3 conforming to IEC 60664-1
Ambient air temperature for operation	-25…55 °C
Ambient air temperature for storage	-40…85 °C
Logistical informations
Country of origin	FR
Main
Range	VigiPacT
Device short name	RHUs
Product or component type	Residual current protection relay
Relay application	Monitoring relay; Protection relay
Mounting support	Front panel
Earth-leakage protection class	Type A
Type of setting	Keypad
Residual earth-leakage sensitity adjustment type	Adjustable
Earth-leakage sensitivity	0.03…1 A, adjustable in step of 0.001 A; 1…30 A, adjustable in step of 0.1 A
Earth-leakage time delay	Instantaneous for 0.03 A; Adjustable 0…4.5 s for 0.03…30 A adjustable in step of 10 ms
Threshold setting	0.015...1 A adjustable in step of 0.001 A pre-alarm; 1...30 A adjustable in step of 0.1 A pre-alarm; 0.03...1 A adjustable in step of 0.001 A alarm; 1...30 A adjustable in step of 0.1 A alarm
Current sensors compatibility	VigiPacT TOA earth leakage current sensor; VigiPacT A earth leakage current sensor; VigiPacT L earth leakage current sensor
[Ithe] conventional enclosed thermal current	8 A
Minimum load	10 mA at 12 V
[Us] rated supply voltage	220...240 V AC 50/60 Hz 70...110 %
Power consumption in VA	8 VA
Monitored distribution system	1000 V - AC at 50/60 Hz (maximum) ; 1000 V - AC at 400 Hz (maximum)
Earthing system	TT; IT; TN-S
[Uimp] rated impulse withstand voltage	8 kV
Reset	Manual reset
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	8.5 cm
Package 1 Width	11.0 cm
Package 1 Length	15.5 cm
Package 1 Weight	430.0 g
Unit Type of Package 2	S04
Number of Units in Package 2	24
Package 2 Height	30.0 cm
Package 2 Width	40.0 cm
Package 2 Length	60.0 cm
Package 2 Weight	11.086 kg

VigiPacT RHUs is a residual current device for front panel installation. It protects against direct or indirect contact with people, fire hazards and motors. It measures the leakage current in an electrical installation through its associated toroidal transformer. It trips the associated circuit breaker when the set residual current is exceeded. It can trigger an alarm and a pre-alarm. The operating supply voltage is 220/240VAC 50/60Hz. It is a type A earth fault protection class. The current sensitivity is between 30 mA and 30 A. The time delay is adjustable from 0 to 4.5s. It is installed on a front panel and has an IP40 protection degree. It must be connected to a compatible Schneider Electric type A toroidal or rectangular sensor. It complies with IEC 60755, IEC 60947-2 Annex M and IEC 60947-5-1 standards.