Complementary
[Imp] maximum permanent current	1.2 x In
Form factor	Monoconnect
Mounting mode	Bolt-on
Tightening torque	10 N.m
supply voltage	230 V AC, +/- 20 %, between phase and neutral; 400 V AC, +/- 20 %, between phases
Network frequency	50 Hz; 60 Hz
Maximum power consumption	3.7 VA
Standards	IEC 61557-12; IEC 61010-1; ETSI EN 301 489-1; IEC 61010-2-030; IEC 61326-1; ETSI EN 300 328
Product certifications	IEC; DNV Marine
Height	57 mm
Width	140 mm
Depth	86 mm
Net weight	300 g
Colour	Dark grey (RAL 7016)
Contractual warranty
Warranty (in months)	18
Environment
Quality labels	CE
Directives	2014/53/EU - radio equipment directive
Operating altitude	0...2000 m
Ambient air temperature for operation	-25…70 °C
Ambient air temperature for storage	-50…85 °C
Overvoltage category	IV conforming to IEC 61010-1
Measurement category	Category III conforming to IEC 61010-2-030
IP degree of protection	IP20
IK degree of protection	IK07 conforming to IEC 60068-2-75 test Ehb
Pollution degree	3
Relative humidity	0…95 % at 55 °C conforming to IEC 60721-3-3
Vibration resistance	3M4 conforming to IEC 60721-3-3
Electromagnetic compatibility	Industrial electromagnetic environment conforming to IEC 61326-1; Radiated EMC conforming to ETSI EN 301 489-17; Electromagnetic emission conforming to IEC 62311
environmental characteristics	Indoor use
Logistical informations
Country of origin	RO
Main
Range of product	PowerLogic
Product name	PowerTag M250
Product or component type	Energy sensor
Poles	3P + N
Maximum current [Imax]	250 A
[Ib] Basic current	40 A
Starting current	160 mA
Saturation current	500 A
Product specific application	Energy management; Overload alarm; Power factor; Load monitoring; Circuit monitoring
Concentrator compatibility	EcoStruxure Panel Server Entry; EcoStruxure Panel Server Universal; EcoStruxure Panel Server Advanced; Harmony Hub; Acti9 Smartlink SI B; Acti9 Smartlink SI D; Acti9 PowerTag Link; Acti9 PowerTag Link HD
Range compatibility	ComPacT ComPacT NSX NSX100; ComPacT ComPacT NSX NSX250; ComPacT Compact INV Interpact INV100; ComPacT Compact INV Interpact INV250; Compact NS Compact NS100; Compact NS Compact NS250; ComPacT ComPacT INS INS250; EasyPact EasyPact CVS100; EasyPact EasyPact CVS160; EasyPact EasyPact CVS250
Type of measurement	Active and reactive energy; Active and reactive power; Apparent power; Current; Voltage; Power factor
Accuracy class	Class 1 active energy conforming to IEC 61557-12; Class 2 reactive energy conforming to IEC 61557-12; Class 1 active power conforming to IEC 61557-12; Class 2 reactive power conforming to IEC 61557-12; Class 2 apparent power conforming to IEC 61557-12; Class 1 current conforming to IEC 61557-12; Class 0.5 voltage conforming to IEC 61557-12; Class 1 power factor conforming to IEC 61557-12
Mounting location	Bottom
Mounting support	On circuit breaker
Connection pitch	35 mm
Product destination	Switchboard
Event management	Voltage loss with measured current at voltage loss
Transmission support medium	Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4 (11…26) transmission time < 5 ms
Emission power	10 mW
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	13.000 cm
Package 1 Width	11.000 cm
Package 1 Length	17.300 cm
Package 1 Weight	546.000 g
Unit Type of Package 2	S02
Number of Units in Package 2	4
Package 2 Height	15.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	2.630 kg
Unit Type of Package 3	P06
Number of Units in Package 3	64
Package 3 Height	71.500 cm
Package 3 Width	60.000 cm
Package 3 Length	80.000 cm
Package 3 Weight	54.080 kg

This PowerTag Energy M250 3P+N is a wirelessly communicating energy sensor. With its monoconnect design, it is suitable for Compact NSX 100/160/250, Compact NS 100/160/250, Compact INS250 and Compact INV 100/160/200/250. It must be connected to a concentrator or a gateway to enable circuit monitoring and diagnostics down to the load level. It is specifically designed for energy management, load monitoring and power availability applications. It includes accurate real-time measurements of active and reactive energy, active, reactive and apparent power, current, voltage and power factor. In the event of a power failure, the device sends a voltage loss alarm and the value of the current per phase before it is de-energized. PowerTag Energy M250 complies with IEC 61557-12. It is a PMD-II/DD/K70/1. The power category is Class 1. The maximum current Imax is 250A. The Ib base current is 40A. The saturation current is 500A and the actual inrush current is 160mA. The Un nominal voltages are phase-neutral 230VAC +/- 20% and phase-phase 400VAC +/- 20%. The maximum consumption is less than or equal to 3.7VA. It can be mounted directly on the bottom of the circuit breaker or Vigi top-mounted terminals or on the top or bottom of the plug-in base if present. The color of the product is gray (RAL7016). The weight is 300g. The protection degree is IP20 and IK07. The operating temperature is between -25°C and +70°C. The storage temperature is between -50°C and +85°C.