| Complementary |
| Network type | AC |
| Network frequency | 50/60 Hz |
| [Ue] rated operational voltage | 200...440 V AC 50/60 Hz conforming to IEC 60947-2 |
| Earth-leakage protection | Without |
| Maximum breaking time | 800 ms |
| Overvoltage category | IV |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Electrical shock protection class | Class II |
| Standards | IEC 60947-2 |
| Logistical informations |
| Country of origin | IT |
| Main |
| Range of product | ComPacT NSX100...250; ComPact NSX100...250 |
| Device short name | VigiPacT |
| Product or component type | Vigi add-on |
| Device application | Wiring |
| Range compatibility | ComPacT ComPacT NSX100 circuit breaker; ComPacT ComPacT NSX160 circuit breaker; ComPacT ComPacT NSX250 circuit breaker; ComPact ComPact NSX100 circuit breaker; ComPact ComPact NSX160 circuit breaker; ComPact ComPact NSX250 circuit breaker |
| Poles description | 4P |
| [In] rated current | 100 A; 160 A; 250 A |
| Earth-leakage protection class | Class A; Class AC |
| Residual earth-leakage sensitity adjustment type | Adjustable |
| Earth-leakage sensitivity | 0.03 A for class A; 0.1 A for class A; 0.3 A for class A; 0.5 A for class A; 1 A for class A; 3 A for class A; 10 A for class AC; 30 A for class AC |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 13.600 cm |
| Package 1 Width | 14.400 cm |
| Package 1 Length | 17.200 cm |
| Package 1 Weight | 1.290 kg |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 8 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 10.717 kg |
This is a Vigi add-on module for ComPact NSX 100/160/250 that provides a residual current alarm. It is used for 4-pole circuit breakers. The operating voltage is between 200 and 440 VAC 50/60 Hz. The differential current sensitivity is adjustable from 30 mA to 30 A. It is installed directly on the device connection terminals and gives an alarm without tripping in the event of a fault due to residual current. This Vigi add-on module is internally powered by the voltage of the distribution network, even if it is only powered by 2 phases. It is compliant with the IEC 60947-2 standard, Annex B.