Complementary
Network type	AC
Network frequency	50/60 Hz
[Ue] rated operational voltage	200...440 V AC 50/60 Hz conforming to IEC 60947-2
Earth-leakage protection	With
Maximum breaking time	800 ms
Overvoltage category	IV
Contractual warranty
Warranty (in months)	18
Environment
Electrical shock protection class	Class II
Standards	IEC 60947-2
Logistical informations
Country of origin	IT
Main
Range of product	ComPacT NSX100...250; ComPact NSX100...250
Device short name	VigiPacT
Product or component type	Vigi add-on
Device application	Wiring
Range compatibility	ComPacT ComPacT NSX100 circuit breaker; ComPacT ComPacT NSX160 circuit breaker; ComPact ComPact NSX100 circuit breaker; ComPact ComPact NSX160 circuit breaker
Poles description	3P
[In] rated current	100 A; 160 A
Earth-leakage protection class	Class A; Class AC
Residual earth-leakage sensitity adjustment type	Adjustable
Earth-leakage sensitivity	0.03 A for class A; 0.1 A for class A; 0.3 A for class A; 0.5 A for class A; 1 A for class A; 3 A for class A; 10 A for class AC; 30 A for class AC
Residual earth-leakage time delay adjustment type	Adjustable
[Δt] residual earth-leakage time delay adjustment	0 ms; 60 ms; 150 ms; 300 ms; 500 ms; 800 ms; 1.2 s; 4 s
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	13.000 cm
Package 1 Width	14.500 cm
Package 1 Length	17.000 cm
Package 1 Weight	1.083 kg
Unit Type of Package 2	S04
Number of Units in Package 2	12
Package 2 Height	30.000 cm
Package 2 Width	40.000 cm
Package 2 Length	60.000 cm
Package 2 Weight	13.440 kg
Unit Type of Package 3	P12
Number of Units in Package 3	48
Package 3 Height	42.000 cm
Package 3 Width	80.000 cm
Package 3 Length	120.000 cm
Package 3 Weight	65.984 kg

This is a Vigi add-on module for ComPact NSX 100/160 that provides residual current protection. It is used for 3-pole circuit breakers. The operating voltage is between 200 and 440 VAC 50/60 Hz. The differential current sensitivity is adjustable from 30 mA to 30 A. It is plugged directly onto the device connection terminals and directly activates the release in the event of a fault due to residual current. This Vigi add-on module is internally powered by the voltage of the distribution network, even if it is only powered by 2 phases. It complies with the IEC 60947-2 standard, Annex B.