TeSys T is a motor management system that, in conjunction with short circuit protection and a contactor, provides complete motor monitoring, control and protection. TeSys T manages the most critical processes, reduces downtime and increases productivity. TeSys T is a flexible system that integrates seamlessly with your automation system via five major communication protocols. TeSys T predicts what will happen in the process as it accurately monitors current, voltage and power over a wide range. This controller is the central component of the motor management system. The module manages the basic functions of the motor management system. It allows the measurement of 3-phase current via integrated current transformers from 0.4 to 100 A or up to 810 A via external current transformers. It also measures ground current with internal or external ground sensors, motor temperature, and inputs and outputs for the different motor control modes, detected fault management and other functions. This controller uses the DeviceNet protocol. This module has 6 discrete logic inputs, 3 logic relay outputs and one relay output for an overload relay for fault indication. The current range of this controller is 0.4 to 8 amps. 120 to 240 VAC is used to power this controller. The controller has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.