Schneider Electric LRD14, EAN: 3389110346817

Schneider Electric LRD14 Motor Protection Relay 7-10A

Industrial Material > Industrial relays and contactors > Contactors

Schneider Electric LRD14 Motor Protection Relay 7-10A

Lieske Part No. 534722
Mfg Part No LRD14
EAN-Code 3389110346817
Manufacturer Schneider Electric
Here only 76,47 EUR
91,00 EUR incl. VAT

Further information for Schneider Electric LRD14 Motor Protection Relay 7-10A

Complementary
Network frequency0...400 Hz
Mounting supportPlate, with specific accessories; Rail, with specific accessories; Under contactor
Tripping threshold1.14 +/- 0.06 Ir conforming to IEC 60947-4-1
Auxiliary contact composition1 NO + 1 NC
[Ith] conventional free air thermal current5 A for signalling circuit
Permissible current3 A at 120 V AC-15 for signalling circuit; 0.22 A at 125 V DC-13 for signalling circuit
[Ue] rated operational voltage690 V AC 0...400 Hz for power circuit conforming to IEC 60947-4-1
Associated fuse rating4 A gG for signalling circuit; 4 A BS for signalling circuit
[Uimp] rated impulse withstand voltage6 kV
Phase failure sensitivityTripping current 130 % of Ir on two phase, the last one at 0
Control typeRed push-button: stop; Blue push-button: reset
Temperature compensation-20…60 °C
Tightening torqueControl circuit: 1.7 N.m - on screw clamp terminals; Power circuit: 1.7 N.m - on screw clamp terminals
Height66 mm
Width45 mm
Depth70 mm
Net weight0.124 kg
Contractual warranty
Warranty (in months)18
Environment
Climatic withstandconforming to IACS E10
IP degree of protectionIP20 conforming to IEC 60529
Ambient air temperature for operation-20…60 °C without derating conforming to IEC 60947-4-1
Ambient air temperature for storage-60…70 °C
Flame retardanceV1 conforming to UL 94
Mechanical robustnessVibrations: 6 Gn conforming to IEC 60068-2-6; Shocks: 15 Gn for 11 ms conforming to IEC 60068-2-7
Dielectric strength1.89 kV at 50 Hz conforming to IEC 60947-1
StandardsEN/IEC 60947-4-1; EN/IEC 60947-5-1; UL 60947-4-1; UL 60947-5-1; CSA C22.2 No 60947-4-1; CSA C22.2 No 60947-5-1; GB/T 14048.4; GB/T 14048.5; EN 50495
Product certificationsIEC; UL; CSA; CCC; EAC; BV; RINA; DNV-GL; LROS (Lloyds register of shipping); ATEX INERIS; UKCA
Logistical informations
Country of originFR
Main
RangeTeSys; TeSys Deca
Product nameTeSys LRD; TeSys Deca
Product or component typeDifferential thermal overload relay
Device short nameLRD
Relay applicationMotor protection
Product compatibilityLC1D09; LC1D12; LC1D38; LC1D32; LC1D25; LC1D18
Network typeAC; DC
Thermal overload classClass 10A conforming to IEC 60947-4-1
Thermal protection adjustment range7…10 A
[Ui] rated insulation voltagePower circuit: 600 V conforming to CSA; Power circuit: 600 V conforming to UL; Power circuit: 690 V conforming to IEC 60947-4-1
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.000 cm
Package 1 Width7.800 cm
Package 1 Length9.000 cm
Package 1 Weight142.000 g
Unit Type of Package 2S02
Number of Units in Package 224
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight3.957 kg
Unit Type of Package 3P06
Number of Units in Package 3384
Package 3 Height75.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight71.312 kg
The motor protection relay LRD14 from the TeSys Deca series by Schneider Electric is a thermal overload relay with differential protection, specifically designed for the protection of electric motors in industrial applications. It is intended to prevent overloads and phase failures during motor operation and is designed for use in control panels with contactors of types LC1D09, LC1D12, LC1D18, LC1D25, LC1D32, and LC1D38. The device is rated for operating voltages up to 690 V AC in the frequency range of 0 to 400 Hz and complies with standards EN/IEC 60947-4-1 and EN/IEC 60947-5-1. The thermal trip class 10 A according to IEC 60947-4-1 ensures precise response to overloads, with the trip threshold set at 1.14 ± 0.06 times the set rated current Ir. The adjustable range for thermal protection is 7 to 10 A, making it suitable for motors with corresponding rated currents.

Applications include industrial drive technology, such as pumps, fans, conveyors, and other electrically driven machinery, where reliable motor protection is required. The relay is temperature-compensated and operates in the ambient temperature range of -20 to 60 °C without performance reduction, enabling stable operation in various environments. The phase failure sensitivity is ensured by a trip current of 130 % of Ir on two phases when the third phase fails, providing early response to unbalanced operating conditions.

Functions and equipment in detail include a mechanical indicator in yellow, visible upon tripping, as well as a red push-button for the Test" function and a blue push-button for the "Off" and "Manual reset functions. The reset mode can be selected via the front panel between manual and automatic reset. The device features an auxiliary switch with 1 S + 1 Oe, which can be used for signal input and output in the control circuit. Connections are made via screw terminals: in the control circuit for cable cross-sections of 1 to 2.5 mm² (flexible or rigid, with or without wire end ferrules) and in the power circuit for 1.5 to 10 mm² (flexible without wire end ferrules) or 1 to 6 mm² (rigid without wire end ferrules). The torque for all terminals is 1.7 Nm.

Technology explained simply shows that the relay operates based on a thermal element that heats up under overload conditions and activates the tripping mechanism. The differential protection detects uneven current distribution between phases, which can occur during phase failures or asymmetries. The rated insulation voltage is 690 V according to IEC 60947-4-1, ensuring high electrical strength. The rated impulse voltage withstand of 6 kV protects the device against transient voltage surges. The dielectric strength of 1.89 kV at 50 Hz meets the requirements of IEC 60947-1.

Compatibility and accessories include use with the mentioned contactors from the LC1D series. As accessories, remote tripping devices such as the LA-D703M 220/240 V 50/60 Hz or the LAD703F 110 V AC/DC are available, as well as reset buttons such as the XB5AL84101 (red, projecting) or XB5AA86102 (blue, flush). A wiring kit LAD7C1 is suitable for models D09 to D18. Installation is done directly under the contactor, alternatively on a panel or rail with special accessories.

Mounting and installation is performed by securing under the contactor or using special mounting accessories. Mechanical robustness is defined by vibration loads of 6 Gn (IEC 60068-2-6) and shock loads of 15 Gn for 11 ms (IEC 60068-2-7). The protection rating IP20 according to IEC 60529 protects against finger contact and ingress of solid foreign objects larger than 12.5 mm, but is not suitable for outdoor use or in damp environments. The flame retardancy corresponds to class V1 according to UL 94.

Operational advantages include reliable overload and phase failure protection, simple operation via front buttons, clear mechanical indication, and compatibility with a wide range of contactors. Temperature compensation ensures constant protection values regardless of ambient temperatures. The integrated auxiliary contacts enable easy integration into control and monitoring systems. The device is designed for use in industrial environments subject to high mechanical and electrical stresses.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/534722
qrcode für Schneider Electric LRD14 Motor Protection Relay 7-10A